Anyone making Cd Player Plates? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jackyl9999 · 08-26-2010, 10:35 PM

Is anyone still making any aluminum cd player plates? I am needing to install a cd player and have a hacked up dash to contend with.

I have tried using the sleeve that came with my cd player and it will not hold it tight enough.

Feel free to throw me some ideas if you have any.

ChevLoRay · 08-26-2010, 11:27 PM

I have one in billet that was sold by Mahanian, in Nevada or Arizona...I think.
The part he made requires a small amount of cutting to allow it to fit, but it dresses up the cut and attaches from the back side and lets a DIN-sized radio slide right in.

He's still listed in the member list, as a Premium (site supporter) member.
It is slick.

huero · 08-27-2010, 12:59 AM

You wanna sell Chevlo?

**Dieselwrencher** · 08-27-2010, 01:01 AM

PM Mekdad. I think he was making some too.

usmcchevy · 08-27-2010, 02:11 AM

http://67-72chevytrucks.com/vboard/s...=414120&page=3

Heres some info on the plates and I posted the links to the plates on post 61 of this link.

Rochlow · 08-27-2010, 08:53 AM

I've pm'd both of the guys making these plates and neither have responded. Would like to find one at some point.

Lemield · 08-27-2010, 11:17 AM

Quote:

Originally Posted by Rochlow

I've pm'd both of the guys making these plates and neither have responded. Would like to find one at some point.

X2 I PM'ed both of them too...no responses...

MrClean · 08-27-2010, 11:27 AM

I'm looking for one also...

jackyl9999 · 08-27-2010, 12:28 PM

What about one made of plastic? Anyone know of one that will work?

mahanian · 08-28-2010, 01:39 AM

I sold all of my first batch and I didn't get enough interest to make another batch of them. I would need at least 20 people interested because I have to buy at least 50 so I would be sitting on the other 30 till I found buyers.

hoss67 · 08-28-2010, 07:42 AM

Well if the price is right I would be interested in an aluminum polished one.

jackyl9999 · 08-28-2010, 08:44 AM

Me too

Rochlow · 08-28-2010, 08:51 AM

Quote:

Originally Posted by jackyl9999

Me too

x2

MrClean · 08-28-2010, 10:36 AM

Same here!

dhc871 · 08-28-2010, 11:08 AM

Same here!

mahanian · 08-28-2010, 11:10 AM

I was selling them for $95 each shipped. If I can get enough interest I would order another batch

huero · 08-28-2010, 12:16 PM

Ditto! I would want one.

Lemield · 08-30-2010, 08:52 AM

I'd take two of them.

jackyl9999 · 08-30-2010, 01:46 PM

Sounds like the interest is there.

Gene · 08-30-2010, 03:44 PM

I bought one from mekdad for 50 shipped, very nice work. I'd try to get ahold of him again. http://www.67-72chevytrucks.com/vboa...=322847&page=4

mahanian · 08-31-2010, 01:25 PM

Mekdad's doesn't come polished to a mirror finish and he didn't have any overhead costs for CAD or prototypes because he stole my CAD file and modified it to look a little different (uglier in my opinion). He is the guy that machined my first batch but screwed me over and started selling them as his own.

Lemield · 08-31-2010, 01:33 PM

Mahanian's are WAY better looking and well worth the difference in cost! As stated before, I'll take two of them if you decide to make them again.

dhc871 · 08-31-2010, 01:49 PM

Mahanian, let us know when we can order.

67ChevyRedneck · 08-31-2010, 02:00 PM

I have a mahanian one, beautiful piece!

http://67-72chevytrucks.com/vboard/s...ighlight=radio

rodstored-72 · 08-31-2010, 03:00 PM

I have seen these in person & they are at the least "show quality"! they would look great in a daily driver or a $100,00 show truck. The finish is the same as if you bought it from a aftermarket place (IE- billet specialties or the like). just my 0.02 .....

08-26-2010, 10:35 PM	#1
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Anyone making Cd Player Plates? Is anyone still making any aluminum cd player plates? I am needing to install a cd player and have a hacked up dash to contend with. I have tried using the sleeve that came with my cd player and it will not hold it tight enough. Feel free to throw me some ideas if you have any. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

08-26-2010, 11:27 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Anyone making Cd Player Plates? I have one in billet that was sold by Mahanian, in Nevada or Arizona...I think. The part he made requires a small amount of cutting to allow it to fit, but it dresses up the cut and attaches from the back side and lets a DIN-sized radio slide right in. He's still listed in the member list, as a Premium (site supporter) member. It is slick. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. Last edited by ChevLoRay; 08-26-2010 at 11:45 PM.

08-27-2010, 12:59 AM	#3
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Anyone making Cd Player Plates? You wanna sell Chevlo?

08-27-2010, 01:01 AM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Anyone making Cd Player Plates? PM Mekdad. I think he was making some too. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-27-2010, 02:11 AM	#5
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: Anyone making Cd Player Plates? http://67-72chevytrucks.com/vboard/s...=414120&page=3 Heres some info on the plates and I posted the links to the plates on post 61 of this link. __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

08-27-2010, 08:53 AM	#6
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Anyone making Cd Player Plates? I've pm'd both of the guys making these plates and neither have responded. Would like to find one at some point. Last edited by Rochlow; 08-27-2010 at 08:53 AM.

08-27-2010, 11:27 AM	#8
MrClean I'LL TRY TO FIX IT! Join Date: Oct 2007 Location: Santa Maria, CA Posts: 108	Re: Anyone making Cd Player Plates? I'm looking for one also... __________________ -- Jorge -- 1972 Custom/10 LWB 350 My Build

08-27-2010, 12:28 PM	#9
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: Anyone making Cd Player Plates? What about one made of plastic? Anyone know of one that will work? __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

08-28-2010, 01:39 AM	#10
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Anyone making Cd Player Plates? I sold all of my first batch and I didn't get enough interest to make another batch of them. I would need at least 20 people interested because I have to buy at least 50 so I would be sitting on the other 30 till I found buyers.

08-28-2010, 07:42 AM	#11
hoss67 Registered User Join Date: Jun 2009 Location: Harrisville, MS Posts: 267	Re: Anyone making Cd Player Plates? Well if the price is right I would be interested in an aluminum polished one.

08-28-2010, 08:44 AM	#12
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: Anyone making Cd Player Plates? Me too __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

08-28-2010, 10:36 AM	#14
MrClean I'LL TRY TO FIX IT! Join Date: Oct 2007 Location: Santa Maria, CA Posts: 108	Re: Anyone making Cd Player Plates? Same here! __________________ -- Jorge -- 1972 Custom/10 LWB 350 My Build

08-28-2010, 11:08 AM	#15
dhc871 Registered User Join Date: Aug 2009 Location: El Paso, TX Posts: 16	Re: Anyone making Cd Player Plates? Same here!

08-28-2010, 11:10 AM	#16
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Anyone making Cd Player Plates? I was selling them for $95 each shipped. If I can get enough interest I would order another batch

08-28-2010, 12:16 PM	#17
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: Anyone making Cd Player Plates? Ditto! I would want one.



Register or Log In To remove these advertisements.

08-30-2010, 08:52 AM	#18
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Anyone making Cd Player Plates? I'd take two of them. __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

08-30-2010, 01:46 PM	#19
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: Anyone making Cd Player Plates? Sounds like the interest is there. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

08-30-2010, 03:44 PM	#20
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Anyone making Cd Player Plates? I bought one from mekdad for 50 shipped, very nice work. I'd try to get ahold of him again. http://www.67-72chevytrucks.com/vboa...=322847&page=4

08-31-2010, 01:25 PM	#21
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Anyone making Cd Player Plates? Mekdad's doesn't come polished to a mirror finish and he didn't have any overhead costs for CAD or prototypes because he stole my CAD file and modified it to look a little different (uglier in my opinion). He is the guy that machined my first batch but screwed me over and started selling them as his own.

08-31-2010, 01:33 PM	#22
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Anyone making Cd Player Plates? Mahanian's are WAY better looking and well worth the difference in cost! As stated before, I'll take two of them if you decide to make them again. __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

08-31-2010, 01:49 PM	#23
dhc871 Registered User Join Date: Aug 2009 Location: El Paso, TX Posts: 16	Re: Anyone making Cd Player Plates? Mahanian, let us know when we can order.

08-31-2010, 02:00 PM	#24
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Anyone making Cd Player Plates? I have a mahanian one, beautiful piece! http://67-72chevytrucks.com/vboard/s...ighlight=radio __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

08-31-2010, 03:00 PM	#25
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,986	Re: Anyone making Cd Player Plates? I have seen these in person & they are at the least "show quality"! they would look great in a daily driver or a $100,00 show truck. The finish is the same as if you bought it from a aftermarket place (IE- billet specialties or the like). just my 0.02 .....

Register or Log In To remove these advertisements.