|
|
|
09-01-2010, 06:41 PM
|
#1 |
|
Registered User
Join Date: Aug 2010
Location: North Wales, PA
Posts: 82
|
Re: 2 for 1, My son's first Square Build
Hey, I have an 85 Square body that has a 5/5 drop, and it sits perfect. As far as C Notches, you won't need them unless you go lower than 5/5, all you have to do is remove the factory bumpstops and your good. Look under the forums but everyone I have talked to/seen says they never hit either. Heres where I got mine from its all DJM so its good stuff. http://app.infopia.com/Shop/Control/...44235232251238. Only thing you have to do other than putting the kit on is if your running ralleye wheels you have to shave like an 1/8" off the calipers where the wheels hit.
-Adam |
|
|
|
09-02-2010, 06:35 PM
|
#2 |
|
Registered User
Join Date: Jan 2008
Location: greenfield indiana
Posts: 241
|
Re: 2 for 1, My son's first Square Build
Nice trucks. I wish i could have paid $300.00 for two trucks. When i was 13. lol
I don't know why but i like the rims on the blue 82.
__________________
1991 1500 longbed: my daily driver  1937 chevy 2dr sedan. dads project
|
|
|
|
|
09-02-2010, 08:19 PM
|
#3 |
|
Registered User
Join Date: Jun 2010
Location: Longview, TX
Posts: 222
|
Re: 2 for 1, My son's first Square Build
Probably b/c they look like hot wheel rims
__________________
"As I walk through the valley of rice i fear no honda, for i have torque!" |
|
|
|
|
09-02-2010, 10:25 PM
|
#4 |
|
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: 2 for 1, My son's first Square Build
Tuning in for this build.
__________________
Alan
Philippians 2:14-16 |
|
|
|
|
10-30-2012, 04:39 PM
|
#5 |
|
Registered User
Join Date: Apr 2005
Location: longview, TX
Posts: 280
|
Re: 2 for 1, My son's first Square Build
im from lonview as well!! cant wait to see this truck finished and cruising the streets!!
__________________
49 Chevy - currently under construction being bagged and hunting for a LS drivetrain!!! 09 - Harley nighttrain on air ride! |
|
|
|
|
10-31-2012, 10:17 AM
|
#6 |
|
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 2 for 1, My son's first Square Build
Most of the floor under the seats is done. Seats/console fit, drive shaft clears and carpet should not be to difficult to do under there...Now on to the trans hump...not sure how its going to look yet...
 Got our brackets for the rear C5 Corvette brakes, thanks to Clint (87chevy.com)...  We will put the cab off this week and get the frame and stuff ready for the blaster. I'll finish the trans hump off of the frame so that we can move forward with the drive train and frame. Then we will start the body work on the cab...Shoot'n for a roller with cab for Turkey Drag in Tyler on December 1 & 2.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
|
|
|
09-04-2010, 08:22 PM
|
#7 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 2 for 1, My son's first Square Build
Subscribed cant wait..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
09-12-2010, 09:57 PM
|
#8 |
|
Registered User
Join Date: Jun 2010
Location: Longview, TX
Posts: 222
|
Re: 2 for 1, My son's first Square Build
Finnally got the blue 82 in my driveway. Will have some pics up tommorow more than likely.
Korbin Posted via Mobile Device
__________________
"As I walk through the valley of rice i fear no honda, for i have torque!" |
|
|
|
|
09-14-2010, 05:39 PM
|
#9 |
|
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 2 for 1, My son's first Square Build
Here are some pictures after we got the blue one home.
on the dolly and after $3 at the car wash...    driver's door:    another interior shot:  Korbin can comment on these in another post, I am just posting the pictures..
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
|
|
|
09-14-2010, 05:48 PM
|
#10 |
|
Registered User
Join Date: Jun 2010
Location: Longview, TX
Posts: 222
|
Re: 2 for 1, My son's first Square Build
Thanks dad( he posted them from work, his computer is a TON faster there)
After we got it off of the dolly, we noticed it sat alot lower on the passenger side( maybe 1 in) My dad and i found one of the leafs on the rear springs is diagonal, thus relieving the pressure it would be applying making the truck sit lower on that side. when i get a flip kit i will fix that in the process of installing the flip kit. First, the grill guard is coming off. then im going to tear out all of the soft stuff in the interior since i wont be driving it for a while. Any other suggestions. Oh, anoher thing, the cab corners aren't that bad. Any other suggestions? Korbin
__________________
"As I walk through the valley of rice i fear no honda, for i have torque!" |
|
|
|
|
09-14-2010, 09:47 PM
|
#11 |
|
Registered User
Join Date: Nov 2008
Location: pennington, newjersey
Posts: 129
|
Re: 2 for 1, My son's first Square Build
that is a awesome truck actually looks like it cleaned up pretty nicely after the wash. i started my project when i was 17 in my backyard and i am now 19. its great getting to drive around in a classic truck and being able to say to someone that no i didnt buy that, i built/restored it. you will have fun!
__________________
78 k5 offroad project 350 sm465 60/14 np205 boatside, dovenose |
|
|
|
|
09-15-2010, 11:54 PM
|
#12 |
|
Registered User
Join Date: Feb 2010
Location: Victorville, CA
Posts: 98
|
Re: 2 for 1, My son's first Square Build
She cleaned up nice. Makes me want to start the father/son project with my son. But he is only 18 months now so we may wait a little longer.
__________________
'85 GMC High Sierra 2500 |
|
|
|
|
09-16-2010, 10:30 PM
|
#13 | |
|
Registered User
Join Date: Jun 2010
Location: Longview, TX
Posts: 222
|
Re: 2 for 1, My son's first Square Build
Quote:
Posted via Mobile Device
__________________
"As I walk through the valley of rice i fear no honda, for i have torque!" |
|
|
|
|
|
09-17-2010, 12:53 AM
|
#14 |
|
Registered User
Join Date: Sep 2005
Location: Bentonville, AR
Posts: 190
|
Re: 2 for 1, My son's first Square Build
man, that is an awesome story. my dad and i did the work to my first truck like that and i still have it. good luck and post lots of pics.
__________________
Build Thread - Papa's truck build up |
|
|
|
|
09-17-2010, 01:07 AM
|
#15 |
|
Home Built '87
Join Date: May 2010
Location: Calgary, Alberta Canada
Posts: 1,829
|
Re: 2 for 1, My son's first Square Build
Subscribing...I wish my dad did a project like this with me when I was younger!
I think that blue truck is awesome!
__________________
Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969 |
|
|
|
|
10-06-2010, 10:43 PM
|
#16 |
|
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 2 for 1, My son's first Square Build
Well we got some work done on it, mostly disassembly. This was done about 10 days ago, we are just now getting to posting pictures. We have been busy and Korbin is running Cross Country at school, he has to be at school at 6am for workouts.
We got the motor and trans out and the brush guard removed. Here are some pictures, sorry about the quality, they are from my cell phone...  after getting the trans out, we pulled the two apart and found a problem. Mr. Kilgore said he never heard it make any noise...   it came off with just a tap of a hammer.... Here is a small friend we found while cleaning the truck at the car wash. She is about 4" in diameter...  Korbin also got the seat and carpet out this past Sunday.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square Last edited by aggie91; 10-06-2010 at 10:44 PM. |
|
|
|
|
10-07-2010, 01:09 AM
|
#17 |
|
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: 2 for 1, My son's first Square Build
that broken flex plate is good news!!
__________________
CHEVY ONLY
|
|
|
|
|
10-07-2010, 08:54 AM
|
#18 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,039
|
Re: 2 for 1, My son's first Square Build
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
10-07-2010, 09:33 AM
|
#19 |
|
Registered User
Join Date: Jul 2010
Location: Lafayette, IN
Posts: 622
|
Re: 2 for 1, My son's first Square Build
Not only is the borken flexplate good news, it looks like the blue truck cleans up pretty well.
|
|
|
|
|
10-07-2010, 02:19 PM
|
#20 |
|
Registered User
Join Date: Dec 2009
Location: Humble, TX
Posts: 184
|
Re: 2 for 1, My son's first Square Build
I need to subscribe to this one. I've got the same plans with my son next year, so I'm glad to see this type of story.
Good luck, Korbin! By the way guys, is it just me or do you all hear a kid's voice when reading Korbin's posts?  This is gonna be a great build thread!
__________________
Fernando Project "FATBOY" build thread The key to happiness is having dreams. The key to success is making your dreams come true. |
|
|
|
|
10-07-2010, 02:20 AM
|
#21 |
|
Account Suspended
Join Date: Dec 2008
Location: Huntsville,AL
Posts: 2,119
|
Re: 2 for 1, My son's first Square Build
looks like its moving in the right direction keep us posted
|
|
|
|
|
10-07-2010, 10:28 PM
|
#22 |
|
Registered User
Join Date: Feb 2010
Location: Central, IL
Posts: 599
|
Re: 2 for 1, My son's first Square Build
Wow, hope the flex plate is the only problem.
Truck really cleaned up great - 100% improvement! Looking forward to your build and progress.
__________________
03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A |
|
|
|
|
10-07-2010, 11:50 PM
|
#23 |
|
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: 2 for 1, My son's first Square Build
Nice progress!! Why didn't you put the spider to work? It is big enough to tote a wrench.
__________________
Alan
Philippians 2:14-16 |
|
|
|
|
10-11-2010, 02:01 PM
|
#24 | |
|
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 2 for 1, My son's first Square Build
Quote:
Posted via Mobile Device
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
|
|
|
|
10-11-2010, 08:59 PM
|
#25 |
|
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: 2 for 1, My son's first Square Build
Thanks guys, Korbin is not feeling good today so no posts from him.
As for the broken flex plate, we have always planned to put another engine in it anyways. I am going to tear it down to see what else could be wrong out of curiosity... I may look for a 5.3/4l60 combo...we have a few years to decide that....
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
|
|
 |
| Bookmarks |
| Tags |
| project, son, square body |
|
|
Hybrid Mode
