MN Parting 64 C10 Custom - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 09-15-2010, 11:24 PM

ttt.. Ill be pulling more parts friday...
--Mike

lovetttimmy · 09-16-2010, 12:19 PM

What do you want for the hood shiped to 01475, and the custom cab side moldings, I alson need a passenger side window crank assembaly, as well as both vent windows W glass,

Thanks
Tim

**tkeduk8r** · 09-22-2010, 08:17 PM

Timmy you still out there???? TTT pulling more parts saturday!!!!
--Mike

**ScottH** · 09-23-2010, 10:51 AM

Mike, just wanted to let u know your PM box is full.

Scott

**tkeduk8r** · 09-23-2010, 11:35 AM

made some room!!!!

jyaughn · 09-23-2010, 08:29 PM

how much for both the fenders shiped to 31907

**tkeduk8r** · 09-24-2010, 02:59 PM

fenders are junk.... bottoms are completly rotten... if yoru still interested let me know but there are way better out there...
--Mike

tank55 · 09-24-2010, 08:38 PM

how much for the front bumper&supports and shipping to 72858
thanks
curtis

jyaughn · 09-24-2010, 10:02 PM

ok thanks for being honest

**tkeduk8r** · 09-27-2010, 01:41 PM

tank... front bumper shipping alone is proly gonna be at least $50 bucks.... is it still worth it to you???
--Mike

SRVBLUES64 · 09-20-2011, 08:15 PM

You and I had spoken about the wiring harness? do you still have it you said it may take time to pull it $65.00 do you use paypal? I can the money now Thanks Jeff in Indy

**aerotruk63** · 09-27-2010, 08:13 PM

How about just the posi carrier unit? Shipped to H9H 3L4 Kirkland, Quebec Canada. Axles should be 17 spline.

Wassa · 10-01-2010, 07:24 AM

Hi there Mike
I would love your hood... how much please? i have a container leaving for Aussie in 7 days... time may not be on my side but worth a try.. my email watsign@powerup.com.au
Cheers Warren

Wassa · 10-01-2010, 07:25 AM

Thats a container leaving from LA ... cheers Warren

**tkeduk8r** · 10-03-2010, 11:13 AM

Wassa... I would have no idea how to make that happen.... im sure parts are scarse down under but you would have to detail out how I would have to get the hood to LA and then make sure it got in a container and get to you... prolly be WAYYY expensive too... but i certainly do what I can to help you out and make it happen...
--Mike

Touchdown67 · 10-10-2010, 11:06 PM

How about do you have a nice pair of rear fender wells for a 64-66 C10 LWB? If so shipped to 85251? Thank You.

**tkeduk8r** · 10-10-2010, 11:17 PM

I do, but i have to hang on to them right now... if anything changes ill let you now... thanks,
--Mike

rdlackey · 10-13-2010, 06:06 AM

How about a dash speaker and mounting brackets?

tapeworm · 10-28-2010, 02:10 AM

How good is the driver's door? I know the weather here is starting to get crappy, but I would not need it right away. Just thought I'd ask before it gets scrapped.

Almost forgot...

I see you sold the glass & regulator out of the door already, but thats OK. I'll only need just the shell.

And how much for the rear end & back glass?

**tkeduk8r** · 10-29-2010, 11:36 PM

tape....door isnt "too" bad... little bubbling on the bottom but nothing through... another board member has dibs onthe dirvers door latch and lower window slider....and aero has inquired about the rear end... was supposed to be taking the bed off and then it would be easy access... ill le tyu know when i know more, but yeah id like to do any pulling b4 the snow really flies up here for sure..
--Mike

tapeworm · 10-30-2010, 09:01 PM

Sounds good; let me know a $$ and maybe a pic, and we can go from there.

C10Slim · 10-31-2010, 02:02 AM

Whats the passenger inner door panel look like? Shipping to 77479. Thanks!

chevyguys · 11-03-2010, 01:00 PM

Need the two plates that the tailgate chain pivot bolt screws into shiped to 85203 ???

Touchdown67 · 11-04-2010, 12:56 AM

Looking for a pair of vent window levers in good shape? Shipped to 85251 AZ. Thank You.....

zooza1 · 11-04-2010, 04:38 AM

i could use both headlight buckets with the springs and adjusters if theyre available . they should fit in a post office flat rate box and ship fairly cheap. thanks

09-15-2010, 11:24 PM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom ttt.. Ill be pulling more parts friday... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-16-2010, 12:19 PM	#2
lovetttimmy Registered User Join Date: Sep 2010 Location: winchendon Posts: 13	Re: Parting 64 C10 Custom What do you want for the hood shiped to 01475, and the custom cab side moldings, I alson need a passenger side window crank assembaly, as well as both vent windows W glass, Thanks Tim

09-22-2010, 08:17 PM	#3
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Timmy you still out there???? TTT pulling more parts saturday!!!! --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-23-2010, 10:51 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 64 C10 Custom Mike, just wanted to let u know your PM box is full. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-23-2010, 11:35 AM	#5
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom made some room!!!! __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-23-2010, 08:29 PM	#6
jyaughn Registered User Join Date: Feb 2010 Location: columbus ga Posts: 231	Re: Parting 64 C10 Custom how much for both the fenders shiped to 31907

09-24-2010, 02:59 PM	#7
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom fenders are junk.... bottoms are completly rotten... if yoru still interested let me know but there are way better out there... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-24-2010, 08:38 PM	#8
tank55 Registered User Join Date: Dec 2009 Location: pottsville, arkansas Posts: 10	Re: Parting 64 C10 Custom how much for the front bumper&supports and shipping to 72858 thanks curtis

09-24-2010, 10:02 PM	#9
jyaughn Registered User Join Date: Feb 2010 Location: columbus ga Posts: 231	Re: Parting 64 C10 Custom ok thanks for being honest

09-27-2010, 01:41 PM	#10
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom tank... front bumper shipping alone is proly gonna be at least $50 bucks.... is it still worth it to you??? --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

09-20-2011, 08:15 PM	#11
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	Re: Parting 64 C10 Custom You and I had spoken about the wiring harness? do you still have it you said it may take time to pull it $65.00 do you use paypal? I can the money now Thanks Jeff in Indy

09-27-2010, 08:13 PM	#12
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 64 C10 Custom How about just the posi carrier unit? Shipped to H9H 3L4 Kirkland, Quebec Canada. Axles should be 17 spline. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 09-27-2010 at 08:40 PM.

10-01-2010, 07:24 AM	#13
Wassa Registered User Join Date: Feb 2010 Location: Brisbane Australia Posts: 4	Re: Parting 64 C10 Custom Hi there Mike I would love your hood... how much please? i have a container leaving for Aussie in 7 days... time may not be on my side but worth a try.. my email watsign@powerup.com.au Cheers Warren

10-01-2010, 07:25 AM	#14
Wassa Registered User Join Date: Feb 2010 Location: Brisbane Australia Posts: 4	Re: Parting 64 C10 Custom Thats a container leaving from LA ... cheers Warren

10-03-2010, 11:13 AM	#15
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Wassa... I would have no idea how to make that happen.... im sure parts are scarse down under but you would have to detail out how I would have to get the hood to LA and then make sure it got in a container and get to you... prolly be WAYYY expensive too... but i certainly do what I can to help you out and make it happen... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's



Register or Log In To remove these advertisements.

10-10-2010, 11:06 PM	#16
Touchdown67 Registered User Join Date: Jul 2010 Location: Scottsdale, Arizona Posts: 204	Re: Parting 64 C10 Custom How about do you have a nice pair of rear fender wells for a 64-66 C10 LWB? If so shipped to 85251? Thank You.

10-10-2010, 11:17 PM	#17
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom I do, but i have to hang on to them right now... if anything changes ill let you now... thanks, --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-13-2010, 06:06 AM	#18
rdlackey Registered User Join Date: Oct 2010 Location: North Carolina Posts: 123	Re: Parting 64 C10 Custom How about a dash speaker and mounting brackets?

10-28-2010, 02:10 AM	#19
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: Parting 64 C10 Custom How good is the driver's door? I know the weather here is starting to get crappy, but I would not need it right away. Just thought I'd ask before it gets scrapped. Almost forgot... I see you sold the glass & regulator out of the door already, but thats OK. I'll only need just the shell. And how much for the rear end & back glass? __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again Last edited by tapeworm; 10-28-2010 at 02:21 AM.

10-29-2010, 11:36 PM	#20
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom tape....door isnt "too" bad... little bubbling on the bottom but nothing through... another board member has dibs onthe dirvers door latch and lower window slider....and aero has inquired about the rear end... was supposed to be taking the bed off and then it would be easy access... ill le tyu know when i know more, but yeah id like to do any pulling b4 the snow really flies up here for sure.. --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-30-2010, 09:01 PM	#21
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: Parting 64 C10 Custom Sounds good; let me know a $$ and maybe a pic, and we can go from there. __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again

10-31-2010, 02:02 AM	#22
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: Parting 64 C10 Custom Whats the passenger inner door panel look like? Shipping to 77479. Thanks!

11-03-2010, 01:00 PM	#23
chevyguys I Got it BAD! Join Date: Jul 2009 Location: MESA, AZ Posts: 205	Re: Parting 64 C10 Custom Need the two plates that the tailgate chain pivot bolt screws into shiped to 85203 ??? __________________ Build Thread: http://www.chevyguys.com

11-04-2010, 12:56 AM	#24
Touchdown67 Registered User Join Date: Jul 2010 Location: Scottsdale, Arizona Posts: 204	Re: Parting 64 C10 Custom Looking for a pair of vent window levers in good shape? Shipped to 85251 AZ. Thank You.....

11-04-2010, 04:38 AM	#25
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: Parting 64 C10 Custom i could use both headlight buckets with the springs and adjusters if theyre available . they should fit in a post office flat rate box and ship fairly cheap. thanks

Register or Log In To remove these advertisements.