Body mount kit question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gene · 03-10-2010, 05:51 PM

Sorry if this has been asked before, but my cab should be ready for mounting in about 3 weeks. Anyone got closeup pics of front/rear cab mounts? I have a kit and have tried the LMC website but the diagram they have looks different than the mounts I have. Also what length/size bolts are needed for the mounts, my kit only came with 2 12inch by 7/16ths bolts I am assuming that are for the front cab mounts?

Gene · 03-13-2010, 11:24 AM

Anyone??

winchster · 03-13-2010, 03:54 PM

What kind of truck Gene?

Gene · 03-13-2010, 06:06 PM

Quote:

Originally Posted by winchster

What kind of truck Gene?

Oops, it's a 71 K10

cobinder · 03-13-2010, 11:40 PM

do you have a pic of your old mounts? I found my 80 K20 mounts didn't match any of the pics. I ended up with mounts that are for a early mid 70's chevy, that is what matched my K20.

Gene · 03-15-2010, 04:29 PM

No, didnt have any old mounts. Took a 2wd cab and a 4wd frame and now i'm putting them together.

Big J'72 GMC · 03-18-2010, 05:53 PM

what years the frame?

Gene · 03-19-2010, 10:30 AM

1972

Gene · 03-19-2010, 04:16 PM

So.....what I need are pics of a 71/72 4wd truck's cab mounts so I can get an idea of the order/location of all the various rubber mounts I have. LMC doesnt give enough detail and I have no instructions.

msgross · 03-19-2010, 04:40 PM

Here is my LMC kit on my 68 K-10

Gene · 03-19-2010, 07:07 PM

Thank you thank you thank you MSGROSS!!!!! That's exactly what I was looking for. So the 2nd pic, is that the radiator support? Your Bushings are somewhat different than mine though, mine are counterpart brand?

msgross · 03-19-2010, 07:56 PM

no problem...

first pic is front cab mount, left side

second pic is rad support left side, bolt is a little crooked... 4WD's and 67-68 2WD's have the smaller hole in the rad support, and last pic is right rear cab...

115-K10 · 09-14-2010, 03:24 PM

Quote:

Originally Posted by msgross

Here is my LMC kit on my 68 K-10

Hi mike,
I found this old post on body mounts and it looks like you have the same lmc kit I am trying to use. I am having a problem drawing down the rear mounts and don't seem to have enough threads to do so. Did you have this problem?
Thanks,
Jeff
Posted via Mobile Device

03-10-2010, 05:51 PM	#1
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Body mount kit question Sorry if this has been asked before, but my cab should be ready for mounting in about 3 weeks. Anyone got closeup pics of front/rear cab mounts? I have a kit and have tried the LMC website but the diagram they have looks different than the mounts I have. Also what length/size bolts are needed for the mounts, my kit only came with 2 12inch by 7/16ths bolts I am assuming that are for the front cab mounts?

03-13-2010, 11:24 AM	#2
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Body mount kit question Anyone??

03-13-2010, 03:54 PM	#3
winchster Registered User Join Date: Jul 2006 Location: Fort Worth, TX Posts: 220	Re: Body mount kit question What kind of truck Gene? __________________ '49 AD 5 window deluxe cab sitting on a '78 K5 chassis Support our troops, stand behind 'em or get in front of 'em. What country can preserve its liberties if its rulers are not warned from time to time that their people preserve the spirit of resistance?

03-13-2010, 11:40 PM	#5
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: Body mount kit question do you have a pic of your old mounts? I found my 80 K20 mounts didn't match any of the pics. I ended up with mounts that are for a early mid 70's chevy, that is what matched my K20. __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome Last edited by cobinder; 03-13-2010 at 11:42 PM.

03-15-2010, 04:29 PM	#6
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Body mount kit question No, didnt have any old mounts. Took a 2wd cab and a 4wd frame and now i'm putting them together.

03-18-2010, 05:53 PM	#7
Big J'72 GMC Registered User Join Date: Oct 2005 Location: Strathroy, Ontario, Canada Posts: 108	Re: Body mount kit question what years the frame?

03-19-2010, 10:30 AM	#8
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Body mount kit question 1972

03-19-2010, 04:16 PM	#9
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Body mount kit question So.....what I need are pics of a 71/72 4wd truck's cab mounts so I can get an idea of the order/location of all the various rubber mounts I have. LMC doesnt give enough detail and I have no instructions.

03-19-2010, 04:40 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Body mount kit question Here is my LMC kit on my 68 K-10 Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 03-19-2010 at 06:39 PM.

03-19-2010, 07:07 PM	#11
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Body mount kit question Thank you thank you thank you MSGROSS!!!!! That's exactly what I was looking for. So the 2nd pic, is that the radiator support? Your Bushings are somewhat different than mine though, mine are counterpart brand?

03-19-2010, 07:56 PM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Body mount kit question no problem... first pic is front cab mount, left side second pic is rad support left side, bolt is a little crooked... 4WD's and 67-68 2WD's have the smaller hole in the rad support, and last pic is right rear cab... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.