fenderwell headers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dbmx66 · 10-02-2010, 01:17 PM

where can i find some of these for a small block?

Super73 · 10-02-2010, 03:02 PM

I'd like to know but for Big Blocks (No the LS is not coming out of the truck)..

limitedstreetoutlaw · 10-02-2010, 03:50 PM

lol that makes 3 of us i'v been searching forever but cant find anything.
guess i'll just have to take the truck over to schoenfeld headers and let them make me some.

70BLAZERX2 · 10-02-2010, 05:23 PM

I have a set of small block fenderwell headers on the shop wall..I have no clue what they are for..they wont fit monte carlo...nor S10..They are to short for 55-6-7's and mabye they are corvette? I will post a pic here tomorrow.

Alex1 · 10-10-2010, 07:43 PM

For BBC

http://www.fabshopheaders.com/catego...downswept.html

dbmx66 · 10-10-2010, 11:29 PM

they look nice, but i think they would hit my upper control arms. plus there for a big bloc

70 net440 · 10-16-2010, 10:53 PM

I think they make fenderwells for early Novas. Would they work?

Marv D · 10-16-2010, 11:19 PM

Quote:

Originally Posted by 70 net440

I think they make fenderwells for early Novas. Would they work?

Nope, well... at least a set of 1-7/8" supercomps for a 64 nova wont even come close on a 66 pickup.

dbmx66 · 10-17-2010, 12:05 AM

im having no luck at all

68longhorn · 10-17-2010, 08:23 PM

custom build???

dbmx66 · 10-17-2010, 09:49 PM

Quote:

Originally Posted by 68longhorn

custom build???

i cant weld for ****, my bros a certified welder, but the tig welder is done

unless you wanna weld me up a nice set! hahahaha

68longhorn · 10-17-2010, 10:02 PM

I can't but I know someone who probly could. He builds some sweet stuff.

dbmx66 · 10-17-2010, 10:16 PM

Quote:

Originally Posted by 68longhorn

I can't but I know someone who probly could. He builds some sweet stuff.

how much you think?

68longhorn · 10-18-2010, 06:31 PM

I'll call the guy tomorrow and see what he says.

Marv D · 10-18-2010, 07:33 PM

I can tell you this, a typical custom built header kit with slip collectors and adapter flanges will run around $450 bare add labor and coating and it's and $800 in a heartbeat. Fenderwell headers being slightly easier than a 'down design' under the frame might be slightly cheaper. A set of Lemons custom fenderwell in stepped diameter run a cool $1000 + coating.

shortbed70 · 10-18-2010, 11:02 PM

Why fenderwell headers anyway? Granted their cool but expensive.

dbmx66 · 10-18-2010, 11:13 PM

Quote:

Originally Posted by shortbed70

Why fenderwell headers anyway? Granted their cool but expensive.

i dont wanna loose power by switching to shortys, i want full legnth, but i just lowered the truck another 2 inches on top of the 7 or so inches it allready was, so my header collectors right now sit an inch from the ground, im gonna be scraping on flat ground, and i dont wanna raise it back up. so i might as well get the best of both worlds, clearances and performance, by swithcing to fenderwell headers.

shortbed70 · 10-21-2010, 08:33 PM

Well my truck is bagged and I run full length headers off a camaro. They are the summit brand and I have plenty of ground clearence.

dbmx66 · 10-22-2010, 03:22 PM

Quote:

Originally Posted by shortbed70

Well my truck is bagged and I run full length headers off a camaro. They are the summit brand and I have plenty of ground clearence.

any part numbers? or specs? thanks

shortbed70 · 10-23-2010, 12:49 AM

SUM-G9001 camaro 67-81 265-400, chevelle 64-77, monte carlo 70-77,chevy 2 nova 68-79full size B body cars 65-89. 1 5/8"
I had to do slight clearencing on the pass side frame rail but that was it. I have some pics in my build somewhere.

KQQL IT · 10-23-2010, 03:04 PM

the 1 5/8 dougs dont hang either D-310c
on my 73

rollinhard · 10-26-2010, 05:57 PM

I might order these and make them fit if i can raw metal to work with and cheaper http://www.speedwaymotors.com/Big-Bl...ders,3830.html

dbmx66 · 10-26-2010, 11:45 PM

i have a small block

rollinhard · 10-27-2010, 09:45 AM

Oh crap sorry bout that. I did a search and found afew different styles forsale on ebay. Just typed in sbc fenderwells headers and few different kinds and prices came up. Atleast it would get ya closer than a full build set maybe.
Posted via Mobile Device

bradh · 10-27-2010, 11:57 AM

I put a set of these under my '72 C10. Not fenderwell but they should work on a lowered truck since they don't go all the way down. Not shorties but not full length either. They came with 2" reducers and I ditched those for 2.5" reducers. I had to reroute a brake line but that was it. A mini starter would be a good idea but they will clear a stock starter. I had to run a shorty style plug also.

http://www.speedwaymotors.com/1955-1...ders,3831.html

10-02-2010, 01:17 PM	#1
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	fenderwell headers? where can i find some of these for a small block?

10-02-2010, 03:02 PM	#2
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: fenderwell headers? I'd like to know but for Big Blocks (No the LS is not coming out of the truck).. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

10-02-2010, 03:50 PM	#3
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: fenderwell headers? lol that makes 3 of us i'v been searching forever but cant find anything. guess i'll just have to take the truck over to schoenfeld headers and let them make me some. __________________ Brandon Street Car Mafia

10-02-2010, 05:23 PM	#4
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,310	Re: fenderwell headers? I have a set of small block fenderwell headers on the shop wall..I have no clue what they are for..they wont fit monte carlo...nor S10..They are to short for 55-6-7's and mabye they are corvette? I will post a pic here tomorrow.

10-10-2010, 07:43 PM	#5
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: fenderwell headers? For BBC http://www.fabshopheaders.com/catego...downswept.html

10-10-2010, 11:29 PM	#6
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: fenderwell headers? they look nice, but i think they would hit my upper control arms. plus there for a big bloc

10-16-2010, 10:53 PM	#7
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: fenderwell headers? I think they make fenderwells for early Novas. Would they work? __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

10-17-2010, 12:05 AM	#9
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: fenderwell headers? im having no luck at all

10-17-2010, 08:23 PM	#10
68longhorn Registered User Join Date: Jun 2007 Location: Cape Coral, Florida Posts: 1,123	Re: fenderwell headers? custom build???

10-17-2010, 10:02 PM	#12
68longhorn Registered User Join Date: Jun 2007 Location: Cape Coral, Florida Posts: 1,123	Re: fenderwell headers? I can't but I know someone who probly could. He builds some sweet stuff.

10-18-2010, 06:31 PM	#14
68longhorn Registered User Join Date: Jun 2007 Location: Cape Coral, Florida Posts: 1,123	Re: fenderwell headers? I'll call the guy tomorrow and see what he says.

10-18-2010, 07:33 PM	#15
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: fenderwell headers? I can tell you this, a typical custom built header kit with slip collectors and adapter flanges will run around $450 bare add labor and coating and it's and $800 in a heartbeat. Fenderwell headers being slightly easier than a 'down design' under the frame might be slightly cheaper. A set of Lemons custom fenderwell in stepped diameter run a cool $1000 + coating. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

10-18-2010, 11:02 PM	#16
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: fenderwell headers? Why fenderwell headers anyway? Granted their cool but expensive. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-21-2010, 08:33 PM	#18
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: fenderwell headers? Well my truck is bagged and I run full length headers off a camaro. They are the summit brand and I have plenty of ground clearence. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-23-2010, 12:49 AM	#20
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: fenderwell headers? SUM-G9001 camaro 67-81 265-400, chevelle 64-77, monte carlo 70-77,chevy 2 nova 68-79full size B body cars 65-89. 1 5/8" I had to do slight clearencing on the pass side frame rail but that was it. I have some pics in my build somewhere. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

10-23-2010, 03:04 PM	#21
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: fenderwell headers? the 1 5/8 dougs dont hang either D-310c on my 73 __________________ " That didnt make it any newer " " Dont antique the equipment " Last edited by KQQL IT; 10-23-2010 at 03:04 PM. Reason: forgot pic

10-26-2010, 05:57 PM	#22
rollinhard Registered User Join Date: Jun 2010 Location: British Columbia Posts: 192	Re: fenderwell headers? I might order these and make them fit if i can raw metal to work with and cheaper http://www.speedwaymotors.com/Big-Bl...ders,3830.html __________________ If you can't impress them with your inteligence, dazzle'm with your stupidity 1969 GMC lwb 2wheel drive can you say big stroker motor to come hehe Last edited by rollinhard; 10-26-2010 at 05:57 PM.

10-26-2010, 11:45 PM	#23
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	Re: fenderwell headers? i have a small block

10-27-2010, 09:45 AM	#24
rollinhard Registered User Join Date: Jun 2010 Location: British Columbia Posts: 192	Re: fenderwell headers? Oh crap sorry bout that. I did a search and found afew different styles forsale on ebay. Just typed in sbc fenderwells headers and few different kinds and prices came up. Atleast it would get ya closer than a full build set maybe. Posted via Mobile Device __________________ If you can't impress them with your inteligence, dazzle'm with your stupidity 1969 GMC lwb 2wheel drive can you say big stroker motor to come hehe

10-27-2010, 11:57 AM	#25
bradh Registered User Join Date: Jan 2007 Location: Nebraska Posts: 84	Re: fenderwell headers? I put a set of these under my '72 C10. Not fenderwell but they should work on a lowered truck since they don't go all the way down. Not shorties but not full length either. They came with 2" reducers and I ditched those for 2.5" reducers. I had to reroute a brake line but that was it. A mini starter would be a good idea but they will clear a stock starter. I had to run a shorty style plug also. http://www.speedwaymotors.com/1955-1...ders,3831.html

Register or Log In To remove these advertisements.