Sure-Fit Fuel Cell Group Buy! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FuelCellGuy · 08-27-2010, 06:29 AM

Does the rear Dropmember use any of the rearmost existing frame?

Quote:

Originally Posted by Jparks

In that case put me down for one

FuelCellGuy · 08-27-2010, 06:42 AM

I looked up some picture of the rear Dropmember and I think it would definately require some detailed measurements. It looks as though the dimensions would be almost the same but the tank would definately need to be raised.

Jparks · 08-27-2010, 08:44 AM

I can call Nate over at porterbuilt and get some measurements, just let me know what you need and I'll try to get something working

Heater63 · 08-30-2010, 11:13 AM

Can you post dimensions please?
I need one for a '63 and just want to double check.

On the plain siphon tank, is there an outlet bung and vent placed on the tank or does the sending unit contain the outlet/vent tubing?

I think I am probably in on this.

FuelCellGuy · 08-30-2010, 11:22 AM

Heater63, PM sent.

FuelCellGuy · 08-31-2010, 06:09 AM

Jparks, any news yet?

Jparks · 08-31-2010, 08:57 AM

I'm emailing him for a link on here where someone measured it with the bags bags fully dumped. All other measurements are the same, just waiting to find rear frame height.

fishingjred73 · 09-01-2010, 11:27 PM

So how are the numbers looking as far as people taking part in the group buy?

FuelCellGuy · 09-02-2010, 06:39 AM

fishingjred73, PM sent.

fishingjred73 · 09-02-2010, 08:32 AM

PM sent

seth is usdm · 10-30-2010, 12:50 AM

once my blazer sells i'll definitely be interested in this. was hoping for bigger capacity though. ill pm you when my blazer is gone

Gobbles · 11-02-2010, 02:29 PM

Interested in a 90 degree, can I snag measurements? I want to triple make sure everything fits before I commit! Thanks

FuelCellGuy · 11-02-2010, 03:34 PM

27" side to side, 20" front to rear, 8 1/2" deep for 18 gallon, 9 1/2" deep for 20 gallon.

fishingjred73 · 11-02-2010, 04:27 PM

These are some nice tanks guys and Mark's a good guy to do business with!

Gobbles · 11-02-2010, 10:58 PM

Can you toss me a quote for a 9.5" tank shipped to 98295. Thanks!

FuelCellGuy · 11-03-2010, 06:50 AM

PM sent.

v502 · 11-06-2010, 05:54 PM

Sweet

I wounder if guys would do something different for me.

I need something baffled and methanol section

FuelCellGuy · 11-07-2010, 08:27 AM

I can do it. Can you email me a sketch? fuelcellguy@juno.com

08-27-2010, 06:42 AM	#27
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! I looked up some picture of the rear Dropmember and I think it would definately require some detailed measurements. It looks as though the dimensions would be almost the same but the tank would definately need to be raised.

08-27-2010, 08:44 AM	#28
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: Sure-Fit Fuel Cell Group Buy! I can call Nate over at porterbuilt and get some measurements, just let me know what you need and I'll try to get something working __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

08-30-2010, 11:13 AM	#29
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: Sure-Fit Fuel Cell Group Buy! Can you post dimensions please? I need one for a '63 and just want to double check. On the plain siphon tank, is there an outlet bung and vent placed on the tank or does the sending unit contain the outlet/vent tubing? I think I am probably in on this. __________________ 292 + TKO500 Last edited by Heater63; 08-30-2010 at 11:14 AM.

08-30-2010, 11:22 AM	#30
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! Heater63, PM sent.

08-31-2010, 06:09 AM	#31
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! Jparks, any news yet?

08-31-2010, 08:57 AM	#32
Jparks Registered User Join Date: Aug 2010 Location: Nederland, TX Posts: 429	Re: Sure-Fit Fuel Cell Group Buy! I'm emailing him for a link on here where someone measured it with the bags bags fully dumped. All other measurements are the same, just waiting to find rear frame height. __________________ 72 SWB - Porterbuilt Front/Rear, 22's, 496bbc - "Outkast" 68 Stepside - Porterbuilt Coilover Chassis, 22's, LS3 - "Badfinger"

09-01-2010, 11:27 PM	#33
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Sure-Fit Fuel Cell Group Buy! So how are the numbers looking as far as people taking part in the group buy? __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

09-02-2010, 06:39 AM	#34
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! fishingjred73, PM sent.

09-02-2010, 08:32 AM	#35
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Sure-Fit Fuel Cell Group Buy! PM sent __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

10-30-2010, 12:50 AM	#36
seth is usdm Registered User Join Date: Nov 2009 Location: Seattle, Washington Posts: 100	Re: Sure-Fit Fuel Cell Group Buy! once my blazer sells i'll definitely be interested in this. was hoping for bigger capacity though. ill pm you when my blazer is gone __________________ 1979 chevy blazer 2wd drop spindles shackles new paint wheels tires custom one of badges cut on waterjet brakes exhaust carpet 2" cowl hood window seals misc weather seals door panels crate 350 w/ 67k turbo 350 3.08 rear end gear ratio FOR SALE! http://67-72chevytrucks.com/vboard/c...ct=4838&cat=13

11-02-2010, 02:29 PM	#37
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Sure-Fit Fuel Cell Group Buy! Interested in a 90 degree, can I snag measurements? I want to triple make sure everything fits before I commit! Thanks __________________ Trevor "You already said spite"

11-02-2010, 03:34 PM	#38
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! 27" side to side, 20" front to rear, 8 1/2" deep for 18 gallon, 9 1/2" deep for 20 gallon.

11-02-2010, 04:27 PM	#39
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Sure-Fit Fuel Cell Group Buy! These are some nice tanks guys and Mark's a good guy to do business with! __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

11-02-2010, 10:58 PM	#40
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Sure-Fit Fuel Cell Group Buy! Can you toss me a quote for a 9.5" tank shipped to 98295. Thanks! __________________ Trevor "You already said spite"

11-03-2010, 06:50 AM	#41
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! PM sent.



Register or Log In To remove these advertisements.

11-06-2010, 05:54 PM	#42
v502 Registered User Join Date: Oct 2009 Location: Portland, OR Posts: 198	Re: Sure-Fit Fuel Cell Group Buy! Sweet I wounder if guys would do something different for me. I need something baffled and methanol section __________________ C10 Stepside Swap with 6.2 L92 & 6SP Auto 6L90 "Brain Check" Project

11-07-2010, 08:27 AM	#43
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Re: Sure-Fit Fuel Cell Group Buy! I can do it. Can you email me a sketch? fuelcellguy@juno.com

Register or Log In To remove these advertisements.