Temperature gauge issues - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**VetteVet** · 11-16-2010, 02:46 AM

What do you get on the gauge with the sender wire disconnected. It should read empty?
In order to read full hot the terminal that the sender unit wire connects to has to be grounded. It sounds like the gauge terminal is grounded , or the circuit board strip that feeds it is . You know that the terminal posts are insulated from the dash with little insulators. Below is the readings you should get at the gauge.

Name: 67-72%20gauge%20resistor%20readingsaaaaaa[1].jpg
Views: 278
Size: 45.6 KB

Name: 67-72%20gauge%20resistor%20readingsaaaaaa[1].jpg
Views: 278
Size: 45.6 KB

11-16-2010, 02:46 AM	#1
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,717	Re: Temperature gauge issues What do you get on the gauge with the sender wire disconnected. It should read empty? In order to read full hot the terminal that the sender unit wire connects to has to be grounded. It sounds like the gauge terminal is grounded , or the circuit board strip that feeds it is . You know that the terminal posts are insulated from the dash with little insulators. Below is the readings you should get at the gauge. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.