Soft top mounting questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 11-21-2010, 08:22 PM

Ok so I am planning on buying a new soft top later this winter. I am going to be shooting some als liner in the tub this thanksgiving weekend and am going to go up and over the bedrails of the blazer. It has the captured nuts in it for the singlewall top and was wondering if I would be screwing myself down the road if I weld the holes closed and bedline over the top of them.

Does the new soft top use any of these holes or do you have to drill your own?

bouncytruck · 11-22-2010, 12:29 AM

My soft top uses the same mounting points as the hard top (STC Fastrack). The old Kayline I had on my 69 did the same.

bigbadchev72 · 11-22-2010, 01:10 AM

I am going to be installing a new soft topper. Does anyone know if they use all the captured nuts or just some of them? If it is just some of them can you let me know which ones?

I would really like to clean the top of the bedrail up.

Livrat · 11-22-2010, 02:11 AM

My best top mounting hardware is drilled for both and uses either the single wall holes with the captured nuts or the double wall holes using bolts and nuts..

11-21-2010, 08:22 PM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Soft top mounting questions Ok so I am planning on buying a new soft top later this winter. I am going to be shooting some als liner in the tub this thanksgiving weekend and am going to go up and over the bedrails of the blazer. It has the captured nuts in it for the singlewall top and was wondering if I would be screwing myself down the road if I weld the holes closed and bedline over the top of them. Does the new soft top use any of these holes or do you have to drill your own? __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

11-22-2010, 12:29 AM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Soft top mounting questions My soft top uses the same mounting points as the hard top (STC Fastrack). The old Kayline I had on my 69 did the same. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

11-22-2010, 01:10 AM	#3
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Soft top mounting questions I am going to be installing a new soft topper. Does anyone know if they use all the captured nuts or just some of them? If it is just some of them can you let me know which ones? I would really like to clean the top of the bedrail up. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

11-22-2010, 02:11 AM	#4
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Soft top mounting questions My best top mounting hardware is drilled for both and uses either the single wall holes with the captured nuts or the double wall holes using bolts and nuts..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.