VA 6 Lug Custom One of a Kind Budnik Billet Rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 12-02-2010, 12:37 AM

One of a kind budnik billet rims made for a magazine shoot. They are 20X9 Front 5.5 bs and 22X10 rear with 6"BS
Tire sizes front are 255 35 20
Rear are 285 35 22

1850 plus actual shipping for everything or 1700 plus actual shipping without steering wheel Figure around 400 for shipping

225 for steering wheel separately shipped (not available separate unless whoever buys the wheels doesn't want it.)

With tires and the wheel, adapter, horn, you're looking at around $5000 worth of wheels/tires/steering wheel.

The rears are very good tread, the fronts have one that's good and one that has some camber wear on them. The tires aren't really a part of this deal even though you could drive on them for many thousands of miles....the rims are the deal here....4000 worth of billet rims with free tires basically......

These rims are Recommended for someone with a narrowed or dropmember front and the narrower rear....especially if bagging.

Now, the good and bad news...I only currently have in my posession the front two 20" rims. The others (22" rears) are at Budnik. They were damaged in shipment to me (scratches one one and minor dents on outside of one rim) I am having them polished and re-hooped so they will be basically new rims when I get them back. I had the fronts polished locally and they have NO damage at all. THe fronts could also be sent to budnik to have the backspacing changed but at your expense. So you're getting a basically new set of one of a kind high dollar billet rims with a decent set of tires. Will include the matching billet steering wheel with red leather half-wrap (can be changed out to your color preference by budnik) including the horn button and adapter.

Started a new thread on this because of all the confusion with the original one and a new (good) change. Finally got the last rim from the PO shipped to Budnik. I have two of them (the 20x9's) and Budnik has the other two (the 22x10's)

As soon as I receive payment for the rims the rears will be polished and re-hooped/re-made to your hoop size and backspacing request. a 10" hoop for one rim is included in the cost. The other rim would be an additional 225 to chage the backspacing. You can go with a 9" for the same price or 12" or larger for an additional $300 charge per rim (what Budinik will charge over the std hoop) As mentioned, you can choose the backspacing for the rears if you re-hoop both. If you want the front backspacing changed you can also do that at your additional expense. I will ship you (or budnik) the two front wheels and steering wheel. And Budnik will make the rear two and ship to you within a couple weeks.

Again,
1850 plus actual shipping for everything or 1700 plus actual shipping without steering wheel Figure around 400 for shipping

225 for steering wheel separately shipped (not available separate unless whoever buys the wheels doesn't want it.)

With tires and the wheel, adapter, horn, you're looking at around $5000 worth of wheels/tires/steering wheel.

m6z · 12-02-2010, 09:37 AM

Nice price. Hope you get these sold this time around.

**67cheby** · 12-02-2010, 11:18 AM

man i wish you would get these sold so i could stop crying over not having the money to buy them !!

VA72C10 · 12-02-2010, 12:05 PM

Quote:

Originally Posted by m6z

Nice price. Hope you get these sold this time around.

Thanks

Quote:

Originally Posted by 67cheby

man i wish you would get these sold so i could stop crying over not having the money to buy them !!

Man, they'd sure look good on your truck

The picture of the rim is the one with the shipping damage to it. Notice the ding in the bottom corner at the 6:30-7:00 position. It possibly could be fixed locally cheaper than the 300 to re-hoop. If you wanted to get it fixed on your own I will sell the rims for 300 less...1550 plus actual shipping....

VA72C10 · 12-06-2010, 09:41 PM

back up top...

VA72C10 · 12-09-2010, 10:46 AM

ttt

STOCKISH · 12-09-2010, 10:51 AM

Very very nice! And close enough to pick up.

When would you have the two rears back?

VA72C10 · 12-09-2010, 11:25 AM

Quote:

Originally Posted by 1972SuperCheyenne

Very very nice! And close enough to pick up.

When would you have the two rears back?

I'll check...not sure with the holidays but originally Budnik told me 2 weeks.

VA72C10 · 12-11-2010, 02:08 AM

looks like 2 weeks plus shipping...

VA72C10 · 12-14-2010, 11:43 AM

ttt

**67cheby** · 12-31-2010, 11:19 AM

any news on the rear wheels ??

VA72C10 · 01-14-2011, 10:19 AM

Quote:

Originally Posted by 67cheby

any news on the rear wheels ??

Both rear wheels now at Budnik

I have the fronts and steering wheel ready to ship

**67cheby** · 01-14-2011, 07:39 PM

so $1550 plus shipping , gets front 2 wheels and tires for all 4 wheels, and steering wheel, that would be the money going to you , the rest of the money i would pay to Budnik for the back two rims ?? they have both of them ?? this is all questions , trying to make sure i have the break down right

VA72C10 · 01-14-2011, 07:55 PM

1550 gets you all four rims and tires and the steering wheel. You will still have to pay shipping and for repair and/or re-hoop of the two back rims that are at budnik. I was quoted 70 to polish the one they have had and 300 to re-hoop the other that they just got.

**67cheby** · 01-15-2011, 10:21 AM

i just emailed the guy at budnik waiting for his reply as soon as he replies , i will get back to you, do you think for shipping you could just cut a piece of 1/4 inch plywood for the front side of the wheel and tire so the face cant get damaged and tape or seran wrap the heck out of them , and do them single, this might save alot on the shipping

**67cheby** · 01-15-2011, 10:24 AM

could you send me a picture of the tires , tread , size , brands, and the offset and backspacing on the front wheels, i am very close to closing this thread for you !!! just waiting on Budniks response

VA72C10 · 01-15-2011, 01:28 PM

Quote:

Originally Posted by 67cheby

could you send me a picture of the tires , tread , size , brands, and the offset and backspacing on the front wheels, i am very close to closing this thread for you !!! just waiting on Budniks response

I'll get the pictures and info for you later today.

VA72C10 · 01-16-2011, 12:10 AM

Got pics but can't find the cord. I did note that the front has two different tires. One is almost brand new and the other has wear. I didn't write it down....just took pics so I don't have the brands....will get to you as soon as I get the cord for my camera.

**67cheby** · 01-16-2011, 03:57 PM

do the back two tires match ??

camtoys1 · 01-16-2011, 04:47 PM

ttt

VA72C10 · 01-16-2011, 07:41 PM

Quote:

Originally Posted by camtoys1

ttt

Hey man, How's it going!

Quote:

Originally Posted by 67cheby

do the back two tires match ??

Yes, the back tires do match and have good tread. Still don't have the cord for my camera...if I don't find it soon I'll take phone pics and post them...

VA72C10 · 01-16-2011, 11:43 PM

Here are the pics. The good tire is almost new as stated and is a Toyo Proxes 4. I'll take another 100 off the price due to the other tire needing to be replaced soon. Actually has decent tread but bad camber wear and of couse doesn't match. So now the price is 1450 plus actual shipping.

**67cheby** · 01-17-2011, 10:46 AM

are the back tires toyo also and do you have a pic of them?? still waiting for the email from budnik as soon as he confirms everything for me we should be able to get this sealed up, if we ship the wheels and tires like i suggested with plywood or something like that on the face of the tire outside, we should be able to ship it all for about 200 or less dont you think, my zip 72761

VA72C10 · 01-17-2011, 11:46 AM

Quote:

Originally Posted by 67cheby

are the back tires toyo also and do you have a pic of them?? still waiting for the email from budnik as soon as he confirms everything for me we should be able to get this sealed up, if we ship the wheels and tires like i suggested with plywood or something like that on the face of the tire outside, we should be able to ship it all for about 200 or less dont you think, my zip 72761

I don't know the brand on the back tires....they are both with budnik now so you could check with Jay. I can put the plywood or heavy duty cardboard on the face. That's the way I got my last set of rims shipped (heavy duty cardboard and shrink wrapped) and I think it was around 200 for the set of 20's I got shipped to me.

**67cheby** · 01-17-2011, 11:57 AM

the cardboard scares me a little, i sure wouldnt want any more damage, i would think if they were shipped seperated from each other not togeher it wouldnt cost more than 75 apiece i have shipped some big heavy stuff about that size and that is around what it cost me, but it would prob be alot more if they were two put together just because of how akward they would be to handle , still waiting for Budnik, but im in central time zone and i am sure they are different

12-02-2010, 12:37 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	6 Lug Custom One of a Kind Budnik Billet Rims One of a kind budnik billet rims made for a magazine shoot. They are 20X9 Front 5.5 bs and 22X10 rear with 6"BS Tire sizes front are 255 35 20 Rear are 285 35 22 1850 plus actual shipping for everything or 1700 plus actual shipping without steering wheel Figure around 400 for shipping 225 for steering wheel separately shipped (not available separate unless whoever buys the wheels doesn't want it.) With tires and the wheel, adapter, horn, you're looking at around $5000 worth of wheels/tires/steering wheel. The rears are very good tread, the fronts have one that's good and one that has some camber wear on them. The tires aren't really a part of this deal even though you could drive on them for many thousands of miles....the rims are the deal here....4000 worth of billet rims with free tires basically...... These rims are Recommended for someone with a narrowed or dropmember front and the narrower rear....especially if bagging. Now, the good and bad news...I only currently have in my posession the front two 20" rims. The others (22" rears) are at Budnik. They were damaged in shipment to me (scratches one one and minor dents on outside of one rim) I am having them polished and re-hooped so they will be basically new rims when I get them back. I had the fronts polished locally and they have NO damage at all. THe fronts could also be sent to budnik to have the backspacing changed but at your expense. So you're getting a basically new set of one of a kind high dollar billet rims with a decent set of tires. Will include the matching billet steering wheel with red leather half-wrap (can be changed out to your color preference by budnik) including the horn button and adapter. Started a new thread on this because of all the confusion with the original one and a new (good) change. Finally got the last rim from the PO shipped to Budnik. I have two of them (the 20x9's) and Budnik has the other two (the 22x10's) As soon as I receive payment for the rims the rears will be polished and re-hooped/re-made to your hoop size and backspacing request. a 10" hoop for one rim is included in the cost. The other rim would be an additional 225 to chage the backspacing. You can go with a 9" for the same price or 12" or larger for an additional $300 charge per rim (what Budinik will charge over the std hoop) As mentioned, you can choose the backspacing for the rears if you re-hoop both. If you want the front backspacing changed you can also do that at your additional expense. I will ship you (or budnik) the two front wheels and steering wheel. And Budnik will make the rear two and ship to you within a couple weeks. Again, 1850 plus actual shipping for everything or 1700 plus actual shipping without steering wheel Figure around 400 for shipping 225 for steering wheel separately shipped (not available separate unless whoever buys the wheels doesn't want it.) With tires and the wheel, adapter, horn, you're looking at around $5000 worth of wheels/tires/steering wheel. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 12-09-2010 at 11:26 AM.

12-02-2010, 09:37 AM	#2
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: 6 Lug Custom One of a Kind Budnik Billet Rims Nice price. Hope you get these sold this time around. __________________ Doug Looking for a 67-72 short bed driver.....

12-02-2010, 11:18 AM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims man i wish you would get these sold so i could stop crying over not having the money to buy them !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-06-2010, 09:41 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims back up top... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-09-2010, 10:46 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-09-2010, 10:51 AM	#7
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 6 Lug Custom One of a Kind Budnik Billet Rims Very very nice! And close enough to pick up. When would you have the two rears back? __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-11-2010, 02:08 AM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims looks like 2 weeks plus shipping... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-14-2010, 11:43 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-31-2010, 11:19 AM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims any news on the rear wheels ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-14-2011, 07:39 PM	#13
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims so $1550 plus shipping , gets front 2 wheels and tires for all 4 wheels, and steering wheel, that would be the money going to you , the rest of the money i would pay to Budnik for the back two rims ?? they have both of them ?? this is all questions , trying to make sure i have the break down right __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 01-14-2011 at 07:39 PM.

01-14-2011, 07:55 PM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims 1550 gets you all four rims and tires and the steering wheel. You will still have to pay shipping and for repair and/or re-hoop of the two back rims that are at budnik. I was quoted 70 to polish the one they have had and 300 to re-hoop the other that they just got. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-15-2011, 10:21 AM	#15
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims i just emailed the guy at budnik waiting for his reply as soon as he replies , i will get back to you, do you think for shipping you could just cut a piece of 1/4 inch plywood for the front side of the wheel and tire so the face cant get damaged and tape or seran wrap the heck out of them , and do them single, this might save alot on the shipping __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-15-2011, 10:24 AM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims could you send me a picture of the tires , tread , size , brands, and the offset and backspacing on the front wheels, i am very close to closing this thread for you !!! just waiting on Budniks response __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 01-15-2011 at 10:54 AM.

01-16-2011, 12:10 AM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims Got pics but can't find the cord. I did note that the front has two different tires. One is almost brand new and the other has wear. I didn't write it down....just took pics so I don't have the brands....will get to you as soon as I get the cord for my camera. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-16-2011, 03:57 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims do the back two tires match ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

01-16-2011, 04:47 PM	#20
camtoys1 Registered User Join Date: Jul 2009 Location: huntington beach ca Posts: 341	Re: 6 Lug Custom One of a Kind Budnik Billet Rims ttt

01-16-2011, 11:43 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 6 Lug Custom One of a Kind Budnik Billet Rims Here are the pics. The good tire is almost new as stated and is a Toyo Proxes 4. I'll take another 100 off the price due to the other tire needing to be replaced soon. Actually has decent tread but bad camber wear and of couse doesn't match. So now the price is 1450 plus actual shipping. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-17-2011, 10:46 AM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims are the back tires toyo also and do you have a pic of them?? still waiting for the email from budnik as soon as he confirms everything for me we should be able to get this sealed up, if we ship the wheels and tires like i suggested with plywood or something like that on the face of the tire outside, we should be able to ship it all for about 200 or less dont you think, my zip 72761 __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172 Last edited by 67cheby; 01-17-2011 at 10:46 AM.

01-17-2011, 11:57 AM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 6 Lug Custom One of a Kind Budnik Billet Rims the cardboard scares me a little, i sure wouldnt want any more damage, i would think if they were shipped seperated from each other not togeher it wouldnt cost more than 75 apiece i have shipped some big heavy stuff about that size and that is around what it cost me, but it would prob be alot more if they were two put together just because of how akward they would be to handle , still waiting for Budnik, but im in central time zone and i am sure they are different __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.