|
12-17-2010, 11:36 AM
|
#9 |
|
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: Slick Balancing?
The tape on weights and then cover them with a piece of aluminum duct tape is what I usually do. BUT if you have disks make sure you know where the disks run in the wheel so the weights don't hit. A 15" wheel with a 3+" backspace gets REAL CLOSE to the Willwood / Aerospace calipers.
I have to find a shop that is willing to slip a magnet in the hood sensor to bypass the hood safety when your using big pfhat wide tires. Most hoods and computer balancers wont accept anything over a 11 or 12" slick.
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
|
|
| Bookmarks |
|
|
Threaded Mode