installing new shift linkage for 700 R4 and column indicator lense - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Murphy IRE · 12-15-2010, 08:09 PM

I have a 71 K20 and a rebuilt 700R4 tranny. It seems the PO never changed the original linkage. I've attached pics of what I have. I can't get the tranny to manually drop into 1st gear. It will only drop as far as 2nd.
My tilt column and linkage are for a 350TH. So I need to pull the old lense (PRND21) and replace with the new (PRND321). I removed the two small screws and the lense doesn't budge! What's the trick?

Also, I ordered a new Lokar linkage kit for a 700R4. In the 1st pic, we did cut some of the column housing away to allow some additional clearance (if needed). Are there any things I need to be aware of or short cuts to help with the install? Thanks in advance!
Pics now attached! Sorry.

brans72 · 12-15-2010, 08:24 PM

no pics are showing up.

tonypaul · 12-15-2010, 09:12 PM

Im kinda in the same situation- I put in a 4l80e with a new chrome tilt column and a Lokar kit. The rod that they sent was to short so I got some allthread from Loews and fabed it up. I have tried adjusting it a couple times now and it doenst seen to go in low gear either. I think I need to shorten the rod some more and adjust the lever up more.

I hope someone will chime in thats been through this...

camaney · 12-15-2010, 11:30 PM

I think that the shifter prN321 should be ok. The 3 is also overdrive on my 91 pickup
Posted via Mobile Device

Murphy IRE · 12-27-2010, 11:39 PM

My linkage kit was short too. I went with a shop cutting and inserting high grade SS to make up the difference. P, D & 1st line up perfectly. The rest are a little off, but she drops into 1st!!!
The reverse neutral switch needs a little adjustment. The reverse lights only work from drive up and not from Park down. She still won't start in neutral. But I really happy with being able to drop it into 1st

12-15-2010, 08:09 PM	#1
Murphy IRE Registered User Join Date: Oct 2009 Location: South Denver Metro, CO Posts: 385	installing new shift linkage for 700 R4 and column indicator lense I have a 71 K20 and a rebuilt 700R4 tranny. It seems the PO never changed the original linkage. I've attached pics of what I have. I can't get the tranny to manually drop into 1st gear. It will only drop as far as 2nd. My tilt column and linkage are for a 350TH. So I need to pull the old lense (PRND21) and replace with the new (PRND321). I removed the two small screws and the lense doesn't budge! What's the trick? Also, I ordered a new Lokar linkage kit for a 700R4. In the 1st pic, we did cut some of the column housing away to allow some additional clearance (if needed). Are there any things I need to be aware of or short cuts to help with the install? Thanks in advance! Pics now attached! Sorry. Attached Images Last edited by Murphy IRE; 12-16-2010 at 09:46 AM.

12-15-2010, 08:24 PM	#2
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: installing new shift linkage for 700 R4 and column indicator lense no pics are showing up.

12-15-2010, 09:12 PM	#3
tonypaul Registered User Join Date: Nov 2009 Location: Austin Tx Posts: 639	Re: installing new shift linkage for 700 R4 and column indicator lense Im kinda in the same situation- I put in a 4l80e with a new chrome tilt column and a Lokar kit. The rod that they sent was to short so I got some allthread from Loews and fabed it up. I have tried adjusting it a couple times now and it doenst seen to go in low gear either. I think I need to shorten the rod some more and adjust the lever up more. I hope someone will chime in thats been through this...

12-15-2010, 11:30 PM	#4
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 201	Re: installing new shift linkage for 700 R4 and column indicator lense I think that the shifter prN321 should be ok. The 3 is also overdrive on my 91 pickup Posted via Mobile Device Last edited by camaney; 12-15-2010 at 11:46 PM.

12-27-2010, 11:39 PM	#5
Murphy IRE Registered User Join Date: Oct 2009 Location: South Denver Metro, CO Posts: 385	Re: installing new shift linkage for 700 R4 and column indicator lense My linkage kit was short too. I went with a shop cutting and inserting high grade SS to make up the difference. P, D & 1st line up perfectly. The rest are a little off, but she drops into 1st!!! The reverse neutral switch needs a little adjustment. The reverse lights only work from drive up and not from Park down. She still won't start in neutral. But I really happy with being able to drop it into 1st



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.