How much Fatmat does a 67-72 cab need? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gene · 01-17-2011, 12:47 PM

I need to get some laid down so I can finish my interior but am unsure how much I need, and I dont want to order too much. 50 ft? 100 ft?

**70cst** · 01-17-2011, 12:57 PM

Quote:

Originally Posted by Gene

I need to get some laid down so I can finish my interior but am unsure how much I need, and I dont want to order too much. 50 ft? 100 ft?

I think to do the floors, roof, and sides I sed about 100sq feet. I used B Quite as it was a lot less than Fatman...or at least it was a couple years ago.
Good luck.

http://www.b-quiet.com/?googleads

Gene · 01-17-2011, 01:01 PM

Quote:

Originally Posted by 70cst

I think to do the floors, roof, and sides I sed about 100sq feet. I used B Quite as it was a lot less than Fatman...or at least it was a couple years ago.
Good luck.

http://www.b-quiet.com/?googleads

How much less? I'm not doing the roof, it's painted. I just need to know how much to do behind gas tank to under dash?

**70cst** · 01-17-2011, 01:05 PM

Quote:

Originally Posted by Gene

How much less? I'm not doing the roof, it's painted. I just need to know how much to do behind gas tank to under dash?

I would guess about 50 sq feet but I'll step aside and let others chime in as I don;t want to give you bad advice. I would call B Quiet and ask them. I bought my B Quiet off ebay and got free shipping.

Gene · 01-17-2011, 03:38 PM

Quote:

Originally Posted by 70cst

I would guess about 50 sq feet but I'll step aside and let others chime in as I don;t want to give you bad advice. I would call B Quiet and ask them. I bought my B Quiet off ebay and got free shipping.

Was hoping to hear that 50ft would cover it, anyone covered the areas that im talking about with 50 ft? Not trying to do the whole truck, just basically the floor from right under dash to top of gas tank.

**John Fabris** · 01-17-2011, 07:18 PM

100 will do it. I brought 200 sf of fatmat, and around 75-80 of it did my inside firewall, floor, behind gas tank, and inside of doors.

Other 100-120 went into the Olds 442.

Gene · 01-17-2011, 09:45 PM

Quote:

Originally Posted by John Fabris

100 will do it. I brought 200 sf of fatmat, and around 75-80 of it did my inside firewall, floor, behind gas tank, and inside of doors.

Other 100-120 went into the Olds 442.

I ordered 50 feet to start, if that isnt enough i'll re-order some more. Thanks guys!

01-17-2011, 12:47 PM	#1
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	How much Fatmat does a 67-72 cab need? I need to get some laid down so I can finish my interior but am unsure how much I need, and I dont want to order too much. 50 ft? 100 ft? Last edited by Gene; 01-17-2011 at 12:50 PM.

01-17-2011, 07:18 PM	#6
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: How much Fatmat does a 67-72 cab need? 100 will do it. I brought 200 sf of fatmat, and around 75-80 of it did my inside firewall, floor, behind gas tank, and inside of doors. Other 100-120 went into the Olds 442. __________________ John Fabris 67 C10 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.