Basic Wiring Harness

[MrDude_1]

Originally Posted by Dan Bowles

The first one I used was an EZ wire copy and I do like the labelling. Once I made a spider out of it with only a few legs instead of spaghetti, it went nice. I also bought colored cable ties and put them on every 4" and coded them for lights, engine, underdash, fuel, and tail lights. I think I did yellow for headlights, blue for engine, red for tail lights and purple for fuel. Underdash was black. That way I knew where to route them when I put them in!

i do something like this as well..

while you're doing it... if you bend the ziptie around the "wrong" way, it doesnt ratchet.. so you can slip it open and shut while you move wires back and forth until you get your harness made.

ive redone a couple stock harnesses, and i found that using "reusable" colored zip ties this way really helped alot...