|
10-25-2014, 01:06 AM | #1 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Shiny!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 01:08 AM | #2 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Attention to detail
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 01:33 AM | #3 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 C10 Urban Retro
I think the original bolts used to secure the door latch were a #4 Phillips, not flat head.
Personally I am going to use Hex when I put mine back together because anything else is a pain in the arse. |
10-25-2014, 07:15 AM | #4 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Yes you are correct! My local hardware place didn't have the exact replacement. So I just said what the heck! Stainless! I put copper anti seize on everything going back in! And by summer I will probably buy some new ones with the correct hardware... But that stuff can nickle and dime you so fast it crazy! So for now? I'll make do!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 05:08 PM | #5 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
My princess!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 05:10 PM | #6 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Always ready to strike a pose! Can't wait for the day to take her for a spin
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 05:15 PM | #7 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
[ATTACH]. [/ATTACH] thanks to my buddy Coda! We got my side glass installed! Wow it's a choir!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 05:51 PM | #8 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Installed passenger side window! Roll down great. Need to do some adjusting on the driver side! My rubber's been in the back of my bed for weeks I decide to take a look at it and install my door rubber. Happen to look at my rear window rubber! Just my luck it's for the big back window. No biggie! Bought it locally! Change it out and install it! Glass will be complete! I love the smoke tint on this charcoal paint!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 06:21 PM | #9 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 C10 Urban Retro
Oh man you are flying towards the finish line.
Soon you will be driving down the road with a perma-smile on your face. |
10-25-2014, 08:04 PM | #10 |
Registered User
Join Date: Mar 2014
Location: Mena, Arkansas
Posts: 91
|
Re: 1967 C10 Urban Retro
Has Princess claimed it for when she is 16 yet? Now about those wheels!
Mark
__________________
Retired Air Force/Disabled Vet 1969 Chevy C-10, On the way to greatness! |
10-25-2014, 08:35 PM | #11 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
She wants her own! A pink one! If she don't change her mind as she gets older, we might just do that!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-25-2014, 08:37 PM | #12 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Mission pull old tranny! Safety first! [ATTACH]h[/ATTACH]
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: Last edited by Orangetonicclicc; 10-25-2014 at 08:40 PM. Reason: Wrong photo |
10-25-2014, 08:41 PM | #13 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Mission pull old tranny! part 2
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-27-2014, 06:40 AM | #14 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: 1967 C10 Urban Retro
Nice job on the transmission removal. It's always a challenge getting the transmission pulled out when you have to do it alone.
__________________
Scott |
10-27-2014, 06:25 PM | #15 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
It was actually easy with that jack, I borrowed from work. Getting to the bolts was the hard part. I'm hoping the install of the other is as easy! As soon as I get that installed I can get an accurate measurement to get my drive shaft cut and balanced!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-27-2014, 10:51 AM | #16 |
Registered User
Join Date: Oct 2012
Location: Detroit
Posts: 748
|
Re: 1967 C10 Urban Retro
Good to see you got the trans out safely! I remember doing that multiple times alone under my NBS with a 4l80e, not fun at all! At least you have a trans jack which comes in handy!
__________________
Brandon Instagram: DRVFSTR Current Project: Beatrix - 1967 SWB LQ4/78mm Turbo/4L80e/ on bags Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=634691 |
10-27-2014, 04:28 PM | #17 |
Registered User
Join Date: Mar 2014
Location: Mena, Arkansas
Posts: 91
|
Re: 1967 C10 Urban Retro
Nice work area! Looks like some stress relievers hangin' around. Great idea!
Mark
__________________
Retired Air Force/Disabled Vet 1969 Chevy C-10, On the way to greatness! |
10-27-2014, 06:28 PM | #18 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
I changed my entire shop into a boxing gym for my son. Put my truck on hold for years! Well he is grown now. It time for some ME TIME!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-28-2014, 12:06 AM | #19 |
Registered User
Join Date: Mar 2014
Location: Mena, Arkansas
Posts: 91
|
Re: 1967 C10 Urban Retro
Amen to that! Number 3 graduates this year, then number 4 graduates 2 years after that, then I'm touring my Country instead of other people's countries.
Mark
__________________
Retired Air Force/Disabled Vet 1969 Chevy C-10, On the way to greatness! |
10-27-2014, 06:26 PM | #20 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Yes came in very handy!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-27-2014, 06:33 PM | #21 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
I need help! The only outside emblem, I left was the CHEVROLET Letter on the hood. Unfortunately the holes seem smaller or missing do to possible bondo and body work. Can anyone give me any pointers or a template to ensure correct placement on the letters. I know I may have to put tape on the holes and re drill them. The question I have, does all the letters come with 2 holes? I searched the forum, but no luck...
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-27-2014, 08:11 PM | #22 |
Registered User
Join Date: Oct 2012
Location: Detroit
Posts: 748
|
Re: 1967 C10 Urban Retro
Yes every letter has 2 holes. I have mine off if you need pics or something.
__________________
Brandon Instagram: DRVFSTR Current Project: Beatrix - 1967 SWB LQ4/78mm Turbo/4L80e/ on bags Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=634691 |
10-27-2014, 08:16 PM | #23 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Another guy posted a picture for me in the question forum. I really need a template made. Would you be willing to make me a template lined from the bottom of the hood matching the holes. I would be willing to send you the postage. I figure with the remaining holes that I have left I can get a pretty good fit to drill the holes out. I'm innocent super rush! I won't be finished til summer.
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
10-27-2014, 08:18 PM | #24 |
Registered User
Join Date: Oct 2012
Location: Detroit
Posts: 748
|
Re: 1967 C10 Urban Retro
For sure. I can do it in poster board and punch each hole. That way if you have a few you can line them up. Pm me your address, not worried about postage
__________________
Brandon Instagram: DRVFSTR Current Project: Beatrix - 1967 SWB LQ4/78mm Turbo/4L80e/ on bags Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=634691 |
10-27-2014, 08:19 PM | #25 |
Registered User
Join Date: Feb 2011
Location: Oklahoma
Posts: 744
|
Re: 1967 C10 Urban Retro
Awesome you are the man! Pm on the way!
__________________
http://67-72chevytrucks.com/vboard/s...ban+Retro:fro: |
Bookmarks |
Tags |
1967 c10, chevy truck, classic truck, short bed |
|
|