Needing more front tire clearance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neversatisfyd · 02-13-2011, 09:18 PM

I have a 72 c-10 that i would like to narrow up the front end to be able to drive it at a lower stance. The truck lays all the way out but i have raise it higher than i like to be able to drive it without getting into the fenders. To begin with the truck has been z'd 3" , drop spindles, art lower strong arms, and factory upper a-arms, on air bags. I am running the boss 338 20x8.5. Any suggestions without hacking up the suspension anymore or spending major bucks? ive seen on portebuilt's site that they can make their control arms narrower than stock and have also seen a few other sites with narrowed control arms. is that my best option?

**N2TRUX** · 02-13-2011, 09:55 PM

Either narrower control arms, or CPP spindles.

neversatisfyd · 02-13-2011, 09:59 PM

do you have any suggestions of brands of narrowed control arms? anybodys any better than the others?

gringoloco · 02-13-2011, 10:35 PM

...or more backspacing

neversatisfyd · 02-13-2011, 10:45 PM

That is a thought also, but i think that its easier to buy suspension parts than it is to find another set of wheels! Im not sure but i think the boss 338 wheels are a standard backspace? Plus my wife says i buy too many wheels as it is! Ha!

**N2TRUX** · 02-13-2011, 11:14 PM

Quote:

Originally Posted by neversatisfyd

do you have any suggestions of brands of narrowed control arms?

I would say talk to Nate at Porterbuilt. My guess is he will build what you need.

neversatisfyd · 02-13-2011, 11:59 PM

thanks, i will try to call him tomorrow if i get a chance. just looking for any other ideas but i thought those were my only options.

cajundragger · 02-14-2011, 12:47 AM

shortening the lower arm would give you what you want, but then your upper bj will probably(like 99.9% sure) bind, so you'll need to cut/weld there to make them work or buy something like ART uppers.

also when you lift the truck truck it will positive camber pretty good.

I had this same issue on my truck. I just went and added an 1 inch more backspace on the front wheels. now when its laid out it looks like it doesn't have any wheels on it they are so far tucked in, but I ride around 1" or so and can turn so its all good.

02-13-2011, 09:18 PM	#1
neversatisfyd Registered User Join Date: Aug 2008 Location: Mayfield, KY Posts: 12	Needing more front tire clearance I have a 72 c-10 that i would like to narrow up the front end to be able to drive it at a lower stance. The truck lays all the way out but i have raise it higher than i like to be able to drive it without getting into the fenders. To begin with the truck has been z'd 3" , drop spindles, art lower strong arms, and factory upper a-arms, on air bags. I am running the boss 338 20x8.5. Any suggestions without hacking up the suspension anymore or spending major bucks? ive seen on portebuilt's site that they can make their control arms narrower than stock and have also seen a few other sites with narrowed control arms. is that my best option? __________________ 7 DEUCE "PRAISE THE LOWERED"

02-13-2011, 09:55 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Needing more front tire clearance Either narrower control arms, or CPP spindles. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-13-2011, 09:59 PM	#3
neversatisfyd Registered User Join Date: Aug 2008 Location: Mayfield, KY Posts: 12	Re: Needing more front tire clearance do you have any suggestions of brands of narrowed control arms? anybodys any better than the others? __________________ 7 DEUCE "PRAISE THE LOWERED"

02-13-2011, 10:35 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Needing more front tire clearance ...or more backspacing __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-13-2011, 10:45 PM	#5
neversatisfyd Registered User Join Date: Aug 2008 Location: Mayfield, KY Posts: 12	Re: Needing more front tire clearance That is a thought also, but i think that its easier to buy suspension parts than it is to find another set of wheels! Im not sure but i think the boss 338 wheels are a standard backspace? Plus my wife says i buy too many wheels as it is! Ha! __________________ 7 DEUCE "PRAISE THE LOWERED"

02-13-2011, 11:59 PM	#7
neversatisfyd Registered User Join Date: Aug 2008 Location: Mayfield, KY Posts: 12	Re: Needing more front tire clearance thanks, i will try to call him tomorrow if i get a chance. just looking for any other ideas but i thought those were my only options. __________________ 7 DEUCE "PRAISE THE LOWERED"

02-14-2011, 12:47 AM	#8
cajundragger Registered User Join Date: Aug 2006 Location: louisiana Posts: 1,008	Re: Needing more front tire clearance shortening the lower arm would give you what you want, but then your upper bj will probably(like 99.9% sure) bind, so you'll need to cut/weld there to make them work or buy something like ART uppers. also when you lift the truck truck it will positive camber pretty good. I had this same issue on my truck. I just went and added an 1 inch more backspace on the front wheels. now when its laid out it looks like it doesn't have any wheels on it they are so far tucked in, but I ride around 1" or so and can turn so its all good.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.