|
07-08-2003, 01:37 PM
|
#1 |
|
Registered User
Join Date: Dec 2002
Location: Omaha Nebraska
Posts: 119
|
Blazer Top
My rig was originally set up for a single wall top that bolts from the top down. I've been searching for a single wall top for some time with no luck, although I've got a smokin deal on a double wall that bolts from the bottom up.
My question: Will the bolt holes on the bed line up with this top? Any advice or info would be appreciated, thanks. Scott
__________________
67 Impala SS Conv 66 Caprice 396 No more trucks.... someday though |
|
|
|
07-08-2003, 02:03 PM
|
#2 |
|
Blazerless:-(
Join Date: Jun 2003
Location: Olympia WA
Posts: 1,612
|
My 1970 blazer had a doublewall top and I think those are the kind that are actually seamed down the middle, which makes them pretty flimsy. I took the double wall top off and replaced it with a single wall I bought from a guy in OR (for 450.00) My friend does fiberglass work and is working on it right now-should be done in a few days. The single wall tops are the way to go - the double wall tops are not as strong and the way they bolt up- from underneath-always strips out the bolts and leaks! I believe they bolt up exactly the same as I am putting a single wall on my blazer. I can post a pic when I get the top back--It is sweet!!! Just keep lookin' for a single wall that is your best bet. I searched the internet, and I recommend just talking to guys on this board and getting the word out that you need one. I will keep my eyes open!
1970 blazin |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
