Help me with 72 12-bolt parts #s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**grumpy** · 02-24-2011, 01:12 PM

I have a 3.08 geared rearend out of a 72 c10 to swap into my 66.

But its been sitting for years.

First, does anyone have the part numbers for axle seals and bearings? Im assuming it needs replaced.

Also, Ive never torn into a rearend, so can anyone spell out how to go about it...?

Id like to get this together soon so I can swap it in. At 3.39 a gallon

and climbing..
I want it in asap

**Clyde65** · 02-24-2011, 01:28 PM

I hate this when someone does it to me, but I suck at typing so I will direct you to this thread, I think it will help you.

http://67-72chevytrucks.com/vboard/s...d.php?t=235615

**grumpy** · 02-24-2011, 02:25 PM

Thanks Clyde

I guess what Im saying/asking is, does everyone feel I need to replace the axle seals since its been sitting so long?
i havnt even checked it to see if theres fluid inside...been too cold out.

I dont want to completely rebuild it, just make is usable.
Its just a stock 283, granny 4spd truck, not a hotrod.

**Clyde65** · 02-24-2011, 03:09 PM

If it were me, I would open it up and drain the fluid, look around it and see if you see any kind of shavings or damage, I would redo the brakes and wheel cylinders while it is off the road too, just for safety sake. That will tell you if the axle is leaking and if you have any real issues. if all looks good I would drive it and see how it goes, taking it easy at first.

I always inspect and or redo the brakes on any project b4 I drive it.

**Captainfab** · 02-25-2011, 02:01 AM

In addition to what Clyde mentioned.

I would pull the axles out and inspect the axle bearing surface for pitting. Also take a look at the axle bearings themselves to see if there is any pitting. I would just go ahead and replace the seals as they are cheap.

**grumpy** · 02-25-2011, 03:04 AM

Thanks guys.

Is it as simple as pulling C-clips and pulling axles? Ive never had to tear into a rearend before.

Also, anyone know the part numbers for those seals, or the bearings for that matter incase I need them too...

**PGSigns** · 02-25-2011, 07:17 AM

Just tell them at the parts store that you need the bearings and seals for the truck the rear came from.
Jimmy

02-24-2011, 01:12 PM	#1
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Help me with 72 12-bolt parts #s I have a 3.08 geared rearend out of a 72 c10 to swap into my 66. But its been sitting for years. First, does anyone have the part numbers for axle seals and bearings? Im assuming it needs replaced. Also, Ive never torn into a rearend, so can anyone spell out how to go about it...? Id like to get this together soon so I can swap it in. At 3.39 a gallon and climbing.. I want it in asap __________________ Tim Road Hounds Last edited by grumpy; 02-24-2011 at 01:13 PM.

02-24-2011, 01:28 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Help me with 72 12-bolt parts #s I hate this when someone does it to me, but I suck at typing so I will direct you to this thread, I think it will help you. http://67-72chevytrucks.com/vboard/s...d.php?t=235615 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-24-2011, 02:25 PM	#3
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Help me with 72 12-bolt parts #s Thanks Clyde I guess what Im saying/asking is, does everyone feel I need to replace the axle seals since its been sitting so long? i havnt even checked it to see if theres fluid inside...been too cold out. I dont want to completely rebuild it, just make is usable. Its just a stock 283, granny 4spd truck, not a hotrod. __________________ Tim Road Hounds

02-24-2011, 03:09 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Help me with 72 12-bolt parts #s If it were me, I would open it up and drain the fluid, look around it and see if you see any kind of shavings or damage, I would redo the brakes and wheel cylinders while it is off the road too, just for safety sake. That will tell you if the axle is leaking and if you have any real issues. if all looks good I would drive it and see how it goes, taking it easy at first. I always inspect and or redo the brakes on any project b4 I drive it. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-25-2011, 02:01 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Help me with 72 12-bolt parts #s In addition to what Clyde mentioned. I would pull the axles out and inspect the axle bearing surface for pitting. Also take a look at the axle bearings themselves to see if there is any pitting. I would just go ahead and replace the seals as they are cheap. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-25-2011, 03:04 AM	#6
grumpy Registered User Join Date: Feb 2007 Location: NE Ohio Posts: 737	Re: Help me with 72 12-bolt parts #s Thanks guys. Is it as simple as pulling C-clips and pulling axles? Ive never had to tear into a rearend before. Also, anyone know the part numbers for those seals, or the bearings for that matter incase I need them too... __________________ Tim Road Hounds

02-25-2011, 07:17 AM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Help me with 72 12-bolt parts #s Just tell them at the parts store that you need the bearings and seals for the truck the rear came from. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.