Gmc Paul's Vs. Lmc Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ts71281 · 07-11-2003, 10:06 AM

I am currently in the process of restoring my 70 C10 SWB guys and am looking to buy all my interior pieces, weather-stripping, rubbers and seals, trim, etc through an aftermarket company. I've dealt with LMC in the past with buying engine parts and radiator supports and I haven't been too impressed with their quality of parts. I've never dealt with GMC Pauls before and I would like everyone's input. I notice GMC Pauls is cheaper on a lot of products over LMC. Adding up all the differences in prices would deduct maybe close to $500. LMC's total parts list for me came out to $1400.00 worth of stuff. Any feedback would be greatly appreciated guys. Keep up the good work on this site!

Joe Hirdler

Keep on Smokin' 'em!!!

dubie · 07-11-2003, 10:10 AM

I have dealt with GMC Pauls before and they are one of the best companys out there. You will defiantely not be dissapointed. Paul and his staff are extremely proffesional and knowledgable.

**nightmare** · 07-11-2003, 10:43 AM

i second that on GMC Paul. He is excellent.

tom hand · 07-11-2003, 11:05 AM

MOST of the parts are the same no matter who you get them from. If you see a part that LMC has that Paul doesn't more than likely it is because Paul won't carry it because it is crap. Save the bucks.

Slammed67 · 07-11-2003, 11:06 AM

GMC Pauls.

Dropt72Shortbed · 07-11-2003, 11:13 AM

i bought a houndstooth seat cover from gmc pauls. when i took it to a shop to have it installed they commented on how it was once of the nicest repro seat covers they had seen.

ts71281 · 07-11-2003, 11:20 AM

Sounds like GMC Paul's is a winner. Now if I can just convince them to give me free shipping.

I wonder if I should drive to IN from Minneapolis, MN. Haven't done a road trip in a few years.

Thanks guys!

Joe Hirdler

Gordo · 07-11-2003, 11:53 AM

Good honest folks and the best quality parts avalible if you go with GMC Paul's.
Hey Paul,,,,,can I have my $10 now?

barn9 · 07-11-2003, 12:45 PM

Definately GMC Paul. There are other good sources also, and like Paul, members of this board.

bpmcgee · 07-11-2003, 12:46 PM

GMC Pauls wins in a couple of areas over LMC:

1) They KNOW these vehicles. LMC just has some parts.

2) They're MUCH nicer to deal with.

Brian

71Chev · 07-11-2003, 01:23 PM

ts71281
Before you drive down to see us, email us a parts list. So we can be sure we have what you need in stock. No point driving all the way down and not get everything.

We do give free shipping if the order is over $500, we do still charge shipping on the heavy or oversize parts no matter the order total.

Thanks for all the kind words guys! Paul is down at the Super Chevy Show in Indianapolis today and this weekend. I'll be there sat & sun. Maybe we'll see some of you there.
Have a great weekend!

Les
@GMCPauls

Gordo you have to pick it up in Carlisle next year. lol

Mudder · 07-11-2003, 02:28 PM

Theres nothing better than getting personal attention when buying parts and thats what you get from the vendors here on the board.

Dads72 · 07-11-2003, 02:30 PM

Ever read a post like that from LMC?

GMC Pauls = good stuff.

Kid · 07-11-2003, 02:35 PM

GMC Pauls all the way, spent alot of money with them, and no complaints whatsoever. Quality stuff, and service.

**68 Stepside** · 07-11-2003, 03:03 PM

GMC Paul's, hands down. I haven't personally dealt with LMC, but out of everything I've heard about them, the bad outweighs the good. Many of their repro parts don't fit worth a damn either.

On the other hand, I have dealt with Paul, and will continue to deal with Paul. Their customer service is second to none.

~

Custom 68 · 07-11-2003, 04:00 PM

I too have bought alot from Paul very standup guy. I was short a couple of bolts in a body/rad support kit I got from him he shipped them out that day no questions asked.

Hotrod70C10 · 07-11-2003, 04:13 PM

gmc pauls all the way baby!

00droptopSS · 07-11-2003, 04:14 PM

GMC Paul gave me free shipping, but you have to be willing to make it worth his time. I.E. spend enough money.

The customer service is good, products are excellent quality.

Longhorn Man · 07-11-2003, 05:39 PM

If you look on the Review Board You'll see tons of people supporting vendors.
This one is a good one ... LMC
And here is one for Paul

Like I've said in the past, the only thing LMC sold me that fits properly...is the hat on my head.

**Ironhorse** · 07-11-2003, 06:41 PM

Just want to add my .02 worth for GMC Paul. I purchased a 21 gal. poly tank from him complete with straps and sending unit. The sending unit float had a crack in it and gave a false reading when I knew the tank was full. (Brass float filled with gas and sank, saying tank was empty). When I found the problem, I personally called and spoke with Paul. He was VERY apologetic that I had experienced such a problem. I was getting ready for a truck/car show with time running short and he sent me a new float, over-night express at his expense. Cost him more than what he sells the float for as a replacement. Doubt that you will get that kind of service from LMC. My next parts will come from GMC Paul for sure !!!!

Just wanted to note the number of posts ! 327 is a good #

Bill72BB · 07-11-2003, 06:53 PM

GMC Paul 'Parts that fit and fast shipping .

BubbaGreen · 07-11-2003, 07:28 PM

Go with GMCPaul....
I have dealt with both.
LMC has shipped me so called "parts" that dont fit or are not
even like the originals. LMC is good at one thing, there catalog
is pretty damn good when it comes to pics and such, OH, and
prices higher than anywhere else!

meathead95 · 07-11-2003, 08:15 PM

christian's classic truck parts
owner tim christian (board member)
he is great to deal with. I buy all my parts from him, make sure you give him a chance hell do yah right.

Class of 69 · 07-11-2003, 08:46 PM

Ten hour drive to GMCPaul's from Twin Cities. Did that in April. Save the time, and have it shipped. Like 71 Chev ( his associate ) said, shipping is free on the amount you are looking to spend. Only charge is for over weight or size pieces. Still going to be less than gas for a pickup trip. Up side would be meeting them!!! Nice, helpfull guy's, but I'll warn you.....don't go in his parts trailer!!!!! You WILL spend more than you went for!!! Candy store for motor heads!!! OOOHHH, I GOTTA have one of those, and one of these...etc. etc.

mtdave2 · 07-11-2003, 08:59 PM

hum looks like the board ist sure who to go with lol........ night and day differance.... paul is the man. always the best stuff that FITs.

07-11-2003, 10:06 AM	#1
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	Gmc Paul's Vs. Lmc Truck I am currently in the process of restoring my 70 C10 SWB guys and am looking to buy all my interior pieces, weather-stripping, rubbers and seals, trim, etc through an aftermarket company. I've dealt with LMC in the past with buying engine parts and radiator supports and I haven't been too impressed with their quality of parts. I've never dealt with GMC Pauls before and I would like everyone's input. I notice GMC Pauls is cheaper on a lot of products over LMC. Adding up all the differences in prices would deduct maybe close to $500. LMC's total parts list for me came out to $1400.00 worth of stuff. Any feedback would be greatly appreciated guys. Keep up the good work on this site! Joe Hirdler Keep on Smokin' 'em!!!

07-11-2003, 10:10 AM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I have dealt with GMC Pauls before and they are one of the best companys out there. You will defiantely not be dissapointed. Paul and his staff are extremely proffesional and knowledgable. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

07-11-2003, 11:05 AM	#4
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	MOST of the parts are the same no matter who you get them from. If you see a part that LMC has that Paul doesn't more than likely it is because Paul won't carry it because it is crap. Save the bucks. __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

07-11-2003, 11:06 AM	#5
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	GMC Pauls. __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

07-11-2003, 11:53 AM	#8
Gordo Registered User Join Date: Jan 2001 Location: Killingworth, CT. USA Posts: 3,378	Good honest folks and the best quality parts avalible if you go with GMC Paul's. Hey Paul,,,,,can I have my $10 now? __________________ 1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist.

07-11-2003, 11:13 AM	#6
Dropt72Shortbed Registered User Join Date: May 2002 Location: Huntington Beach CA Posts: 678	i bought a houndstooth seat cover from gmc pauls. when i took it to a shop to have it installed they commented on how it was once of the nicest repro seat covers they had seen.

07-11-2003, 11:20 AM	#7
ts71281 Registered User Join Date: Apr 2003 Location: Maple Grove, MN Posts: 497	Sounds like GMC Paul's is a winner. Now if I can just convince them to give me free shipping. I wonder if I should drive to IN from Minneapolis, MN. Haven't done a road trip in a few years. Thanks guys! Joe Hirdler

07-11-2003, 12:45 PM	#9
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Definately GMC Paul. There are other good sources also, and like Paul, members of this board. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

07-11-2003, 12:46 PM	#10
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	GMC Pauls wins in a couple of areas over LMC: 1) They KNOW these vehicles. LMC just has some parts. 2) They're MUCH nicer to deal with. Brian

07-11-2003, 01:23 PM	#11
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	ts71281 Before you drive down to see us, email us a parts list. So we can be sure we have what you need in stock. No point driving all the way down and not get everything. We do give free shipping if the order is over $500, we do still charge shipping on the heavy or oversize parts no matter the order total. Thanks for all the kind words guys! Paul is down at the Super Chevy Show in Indianapolis today and this weekend. I'll be there sat & sun. Maybe we'll see some of you there. Have a great weekend! Les @GMCPauls Gordo you have to pick it up in Carlisle next year. lol __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

07-11-2003, 02:28 PM	#12
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Theres nothing better than getting personal attention when buying parts and thats what you get from the vendors here on the board.

07-11-2003, 02:30 PM	#13
Dads72 Registered User Join Date: Nov 2002 Posts: 427	Ever read a post like that from LMC? GMC Pauls = good stuff.

07-11-2003, 02:35 PM	#14
Kid Senior Member Join Date: Jun 2002 Location: Kansas Posts: 702	GMC Pauls all the way, spent alot of money with them, and no complaints whatsoever. Quality stuff, and service. __________________ The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348

07-11-2003, 03:03 PM	#15
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	GMC Paul's, hands down. I haven't personally dealt with LMC, but out of everything I've heard about them, the bad outweighs the good. Many of their repro parts don't fit worth a damn either. On the other hand, I have dealt with Paul, and will continue to deal with Paul. Their customer service is second to none. ~ __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-11-2003, 04:00 PM	#16
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,944	I too have bought alot from Paul very standup guy. I was short a couple of bolts in a body/rad support kit I got from him he shipped them out that day no questions asked. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"



Register or Log In To remove these advertisements.

07-11-2003, 04:13 PM	#17
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	gmc pauls all the way baby! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

07-11-2003, 04:14 PM	#18
00droptopSS 2.5/4 on 20's Join Date: Aug 2001 Location: Shreveport, LA Posts: 392	GMC Paul gave me free shipping, but you have to be willing to make it worth his time. I.E. spend enough money. The customer service is good, products are excellent quality. __________________ 62 C/10 SWB. Currently in ground up resto. Big back window cab, V8, auto. My wife's grandfather's truck. 1965 Mustang Vert - Shelby Clone 2005 Dodge SRT-10 My Old 72 SWB

07-11-2003, 05:39 PM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	LMC sucks If you look on the Review Board You'll see tons of people supporting vendors. This one is a good one ... LMC And here is one for Paul Like I've said in the past, the only thing LMC sold me that fits properly...is the hat on my head. Attached Images

07-11-2003, 06:41 PM	#20
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,342	Just want to add my .02 worth for GMC Paul. I purchased a 21 gal. poly tank from him complete with straps and sending unit. The sending unit float had a crack in it and gave a false reading when I knew the tank was full. (Brass float filled with gas and sank, saying tank was empty). When I found the problem, I personally called and spoke with Paul. He was VERY apologetic that I had experienced such a problem. I was getting ready for a truck/car show with time running short and he sent me a new float, over-night express at his expense. Cost him more than what he sells the float for as a replacement. Doubt that you will get that kind of service from LMC. My next parts will come from GMC Paul for sure !!!! Just wanted to note the number of posts ! 327 is a good # __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-11-2003, 06:53 PM	#21
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	GMC Paul 'Parts that fit and fast shipping . __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

07-11-2003, 07:28 PM	#22
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Go with GMCPaul.... I have dealt with both. LMC has shipped me so called "parts" that dont fit or are not even like the originals. LMC is good at one thing, there catalog is pretty damn good when it comes to pics and such, OH, and prices higher than anywhere else! __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

07-11-2003, 08:15 PM	#23
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	christian's classic truck parts owner tim christian (board member) he is great to deal with. I buy all my parts from him, make sure you give him a chance hell do yah right. __________________ 72 2wd blazer 72 swb 4x4

07-11-2003, 08:46 PM	#24
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	Ten hour drive to GMCPaul's from Twin Cities. Did that in April. Save the time, and have it shipped. Like 71 Chev ( his associate ) said, shipping is free on the amount you are looking to spend. Only charge is for over weight or size pieces. Still going to be less than gas for a pickup trip. Up side would be meeting them!!! Nice, helpfull guy's, but I'll warn you.....don't go in his parts trailer!!!!! You WILL spend more than you went for!!! Candy store for motor heads!!! OOOHHH, I GOTTA have one of those, and one of these...etc. etc. __________________ 69 GMC K10 ..some restoration required....still..

07-11-2003, 08:59 PM	#25
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,528	hum looks like the board ist sure who to go with lol........ night and day differance.... paul is the man. always the best stuff that FITs. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

Register or Log In To remove these advertisements.