where to fill this tranny - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GreenMystChevy · 07-09-2003, 02:13 PM

I am getting ready to put some gear lube in this here tranny and transfer case but I'm not sure how much and where to fill it at.
I have an SM465 and a Rockwell 221 I believe. I am guessing that you fill it till it comes back out but I need to know where to fill it and if there are any tricks to it. Thanks guys.

Blue_71 · 07-09-2003, 02:55 PM

theres a little bolt on the side, square head, fill it untill it runs out a little... dont ask me HOW to do it though, i havent found an easy way

GreenMystChevy · 07-09-2003, 03:01 PM

How Do You Do That?

Is there a separate fill for the transfer case or should it just go right in? You wouldn't have an idea of how many bottles of this crap I should buy do ya? Thanks for the help.

cableguy0 · 07-09-2003, 06:01 PM

do yourself a favor and a get a suction gun it is a cylinder with a slide on it (to create the suction) andit has a hose on the end its the only easy non totally messy way to fill a rear or a manual tranny

Blue_71 · 07-09-2003, 06:23 PM

not sure on the t-case but now that you mention it i need to check mine... im pretty sure theres a seal in there so you have to fill it seperate

GreenMystChevy · 07-10-2003, 01:50 PM

So, I know someone has done this once before.
What I need the most is to know whether or not I will need to fill the transfer case separate or not.
Good idea on the suction deally, I will get one of those.

crazy longhorn · 07-10-2003, 05:27 PM

Blue 71 has you covered on the T case. there is a seal tween the trans & case.....they fill separately. Dont ask me on the lube tho! I am running 30 weight motor oil in the t case on my 78 K 20. it hasnt caused any problems, so I guess its ok. good luck,crazyL

GreenMystChevy · 07-10-2003, 05:40 PM

Ya know what, I think that answered everything. I guess I was just hoping that someone could tell me exactly what I wanted to hear but if I'd learn to read the message I could probably figure it out myself.
Now, let's try not to get lube all over myself.
Thanks guys!

crazy longhorn · 07-10-2003, 05:51 PM

Yea man, that lube stinks! Try washing that out of the hair....All temp Cheer! its kinda rough on the scalp tho

Good luck, crazyL

killerbee · 07-10-2003, 09:26 PM

on the square bolt there, take it out, if you can touch fuid with your pinky finger, you dont need any more my friend!! Thats just on the tranny though------ killerbee!!

GreenMystChevy · 07-11-2003, 02:09 PM

well I just filled both of 'em up.
If I did this right, the tranny took a gallon of this crap and the transfer case took about half a gallon or less.
I don't think I coulda screwed it up but on my Rockwell 221 there are two sqare headed bolts about and inch apart on top of each other. I am guessing the bottom one to be the drain plug and the top of the two to be the filler.

07-09-2003, 02:13 PM	#1
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	where to fill this tranny I am getting ready to put some gear lube in this here tranny and transfer case but I'm not sure how much and where to fill it at. I have an SM465 and a Rockwell 221 I believe. I am guessing that you fill it till it comes back out but I need to know where to fill it and if there are any tricks to it. Thanks guys. __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

07-09-2003, 03:01 PM	#3
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	How Do You Do That? Is there a separate fill for the transfer case or should it just go right in? You wouldn't have an idea of how many bottles of this crap I should buy do ya? Thanks for the help. __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

07-09-2003, 06:01 PM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	do yourself a favor and a get a suction gun it is a cylinder with a slide on it (to create the suction) andit has a hose on the end its the only easy non totally messy way to fill a rear or a manual tranny __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

07-10-2003, 01:50 PM	#6
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	So, I know someone has done this once before. What I need the most is to know whether or not I will need to fill the transfer case separate or not. Good idea on the suction deally, I will get one of those. __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

07-10-2003, 05:27 PM	#7
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Blue 71 has you covered on the T case. there is a seal tween the trans & case.....they fill separately. Dont ask me on the lube tho! I am running 30 weight motor oil in the t case on my 78 K 20. it hasnt caused any problems, so I guess its ok. good luck,crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

07-10-2003, 05:40 PM	#8
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	Ya know what, I think that answered everything. I guess I was just hoping that someone could tell me exactly what I wanted to hear but if I'd learn to read the message I could probably figure it out myself. Now, let's try not to get lube all over myself. Thanks guys! __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall

07-10-2003, 05:51 PM	#9
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Yea man, that lube stinks! Try washing that out of the hair....All temp Cheer! its kinda rough on the scalp tho Good luck, crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

07-10-2003, 09:26 PM	#10
killerbee Registered User Join Date: Jul 2003 Location: Va Posts: 30	on the square bolt there, take it out, if you can touch fuid with your pinky finger, you dont need any more my friend!! Thats just on the tranny though------ killerbee!!

07-11-2003, 02:09 PM	#11
GreenMystChevy Registered User Join Date: Jan 2002 Location: Woodinville, WA Posts: 513	well I just filled both of 'em up. If I did this right, the tranny took a gallon of this crap and the transfer case took about half a gallon or less. I don't think I coulda screwed it up but on my Rockwell 221 there are two sqare headed bolts about and inch apart on top of each other. I am guessing the bottom one to be the drain plug and the top of the two to be the filler. __________________ Jeremy '71 C-10 '72 GMC K2500 '72 Nova (Dad's) '70 Chevelle SS '55 Sedan Delivery Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.