Headers and burnt plug wires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Speedster 229 · 07-11-2003, 01:46 PM

I'm running a small block w/ Vortec heads and a HEI ignition.Have a set of coated Hooker comp headers. The 3rd plug wire back on the drivers side is a B----. All others run great with a 90 degree boot up to a wire loom running on top of the valve cover. The only way I can route the problem plug is straight out and over the header to the loom with a heat sheild sock in it. I'd like to run a good set of wires and was wondering if anyone knows of a set that come with more than one boot style so I could build 7 w/ 90 degree boots and one with the straight boot. Anyone else have this problem?? Heating or bending the header is out because they are coated.

69sixpackbee · 07-11-2003, 01:54 PM

Get the MSD wires. They have bendable boots so you can make 'em the way you want.

Speedster 229 · 07-11-2003, 01:56 PM

I'm running MSD now but must have wrong ones. Do you know a model ##. I can't tell which ones are which. Thanks

69sixpackbee · 07-11-2003, 02:04 PM

Jeg's #121-3118 or 121-31183
http://www.jegs.com/cgi-bin/ncommerc...53&prmenbr=361

chaptr2 · 07-11-2003, 02:27 PM

I use MSD wires and Coated Hooker super comp headers to with out any problem. Here is what I'm using. Just a little more info, the wire looms I'm using make it easy to twist the wire out of the way so they don't come close to the header.

Here is a couple of pics and part numbers. MSD "Under header" plug wires and the RNM-1101P wire looms. The wires are for points style cap and 90 degree boots at both ends.

chaptr2 · 07-11-2003, 02:29 PM

Here is the other side.

chaptr2 · 07-11-2003, 02:31 PM

Here is a front shot of what the wires look like.

Plus I like showing my engine off

07-11-2003, 01:56 PM	#3
Speedster 229 Registered User Join Date: Oct 2002 Location: Spokane Wa. Posts: 36	I'm running MSD now but must have wrong ones. Do you know a model ##. I can't tell which ones are which. Thanks __________________ 1970 1/2 ton LWB 350 / 700R Rebuilt top to bottom. Not custom, but really sanitary!!!!!!!!

07-11-2003, 02:27 PM	#5
chaptr2 Registered User Join Date: Mar 2000 Location: Olalla, WA Posts: 705	I use MSD wires and Coated Hooker super comp headers to with out any problem. Here is what I'm using. Just a little more info, the wire looms I'm using make it easy to twist the wire out of the way so they don't come close to the header. Here is a couple of pics and part numbers. MSD "Under header" plug wires and the RNM-1101P wire looms. The wires are for points style cap and 90 degree boots at both ends. Attached Images __________________ This is only my opinion and it is subject to change. 70 GMC Short box stepside Blown 388 Stroker 72 K/5 Blazer 350/SM465/205

07-11-2003, 02:29 PM	#6
chaptr2 Registered User Join Date: Mar 2000 Location: Olalla, WA Posts: 705	Here is the other side. Attached Images __________________ This is only my opinion and it is subject to change. 70 GMC Short box stepside Blown 388 Stroker 72 K/5 Blazer 350/SM465/205

07-11-2003, 02:31 PM	#7
chaptr2 Registered User Join Date: Mar 2000 Location: Olalla, WA Posts: 705	Here is a front shot of what the wires look like. Plus I like showing my engine off Attached Images __________________ This is only my opinion and it is subject to change. 70 GMC Short box stepside Blown 388 Stroker 72 K/5 Blazer 350/SM465/205

07-11-2003, 01:46 PM	#1
Speedster 229 Registered User Join Date: Oct 2002 Location: Spokane Wa. Posts: 36	Headers and burnt plug wires I'm running a small block w/ Vortec heads and a HEI ignition.Have a set of coated Hooker comp headers. The 3rd plug wire back on the drivers side is a B----. All others run great with a 90 degree boot up to a wire loom running on top of the valve cover. The only way I can route the problem plug is straight out and over the header to the loom with a heat sheild sock in it. I'd like to run a good set of wires and was wondering if anyone knows of a set that come with more than one boot style so I could build 7 w/ 90 degree boots and one with the straight boot. Anyone else have this problem?? Heating or bending the header is out because they are coated. __________________ 1970 1/2 ton LWB 350 / 700R Rebuilt top to bottom. Not custom, but really sanitary!!!!!!!!

07-11-2003, 01:54 PM	#2
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Get the MSD wires. They have bendable boots so you can make 'em the way you want.

07-11-2003, 02:04 PM	#4
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Jeg's #121-3118 or 121-31183 http://www.jegs.com/cgi-bin/ncommerc...53&prmenbr=361



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.