Vintage Air Sale - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHP c-10 · 01-22-2011, 12:20 PM

Hey Justin,
sent a pm also...
(68 c-10 non ac cab, with 5.3l donor and compressor going in. Would like a price for the remaining bits, stock looking control panel (if avail). Availability? Are there vent options-add on under dash or nice looking vents in the dash?
Thanks,
Jonathan

71rustpile · 01-26-2011, 09:32 AM

Hi Justin,
Could you get me a price on a kit for a non ac 70 Blazer?
Thanks
Dan

jimig1 · 01-28-2011, 11:06 AM

I sent a PM a few days ago and have not heard anything

Scottshotrods · 01-28-2011, 11:48 AM

Quote:

Originally Posted by jimig1

I sent a PM a few days ago and have not heard anything

Sorry for the delay we have been getting ready for the Grand national Roadster show this weekend we are at the shop and we have our laptop with us so we will be sending you some prices today

Justin

jdmathes074 · 01-28-2011, 12:13 PM

Quote:

Originally Posted by 85burb

Do you make one for a 85 burb that replaces all the factory crap under dash? I will have the comp and brackets for my ls swap already. My factory one is junk and needs to be replaced.

can i get this same information but for an 86 c-10 with an ls1. i dont know if that would change anything or not. thanks.

jimig1 · 01-28-2011, 02:09 PM

Quote:

Originally Posted by Scottshotrods

Sorry for the delay we have been getting ready for the Grand national Roadster show this weekend we are at the shop and we have our laptop with us so we will be sending you some prices today

Justin

Not a problem just wanted to make sure it was not missed. Have a Good show!

Scottshotrods · 01-31-2011, 08:32 PM

Quote:

Originally Posted by 71rustpile

Hi Justin,
Could you get me a price on a kit for a non ac 70 Blazer?
Thanks
Dan

The price on your kit is $1335.00 retail take 10% off $1201.50 and shipping will be added to the kit.
Justin

Scottshotrods · 01-31-2011, 08:32 PM

Quote:

Originally Posted by 71rustpile

Hi Justin,
Could you get me a price on a kit for a non ac 70 Blazer?
Thanks
Dan

p/m sent
Justin

Scottshotrods · 01-31-2011, 08:34 PM

Quote:

Originally Posted by jimig1

I sent a PM a few days ago and have not heard anything

resend your p/m please
Jusitn

Scottshotrods · 01-31-2011, 08:38 PM

Quote:

Originally Posted by jdmathes074

can i get this same information but for an 86 c-10 with an ls1. i dont know if that would change anything or not. thanks.

P/m sent
Justin

**thelonerife** · 02-03-2011, 10:34 PM

Can you get pieces? I need the adaptors that go on the stock side ac stock vents. I have system that was for a non ac truck and it came with those smaller vents that I'm not going to use.

DUTCHMAN · 02-04-2011, 04:08 AM

Hey Jon or Justin what price for a:
941170 1967-72 Complete Kit (Non-Factory Air Car)
shipped to 75831

thanks

Scottshotrods · 02-04-2011, 12:37 PM

Quote:

Originally Posted by DUTCHMAN

Hey Jon or Justin what price for a:
941170 1967-72 Complete Kit (Non-Factory Air Car)
shipped to 75831

thanks

P/m sent
Justin

**thelonerife** · 02-05-2011, 12:50 PM

Quote:

Originally Posted by thelonerife

Can you get pieces? I need the adaptors that go on the stock side ac stock vents. I have system that was for a non ac truck and it came with those smaller vents that I'm not going to use.

??

BBC Motorhead · 03-21-2011, 10:04 PM

Just wondering if this sale is still going? If so I need some info on the 941170 kit for non ac cab. Price and shipping to 58501? What style are the dash vents and is there any pics of them? What does the controls look like?
Thanks

Scottshotrods · 03-22-2011, 11:19 AM

Quote:

Originally Posted by BBC Motorhead

Just wondering if this sale is still going? If so I need some info on the 941170 kit for non ac cab. Price and shipping to 58501? What style are the dash vents and is there any pics of them? What does the controls look like?
Thanks

P/m sent
Justin

Nova_Cobra64 · 03-22-2011, 04:27 PM

I exchanged PM's with Jon a while back and think I may have been lost in the shuffle a bit.

I'm still interested in a price on a vintage air setup. The truck is a 69 GMC, non-factory air, LS3. I will already have a compressor as I'm installing the corvette accessory drive kit (19155067). I plan to use a Dakota Digital control as I don't care for the factory control too much.

maxxom · 04-03-2011, 10:03 PM

Quote:

Originally Posted by Scottshotrods

P/m sent
Justin

Please PM with pricing.
1970 C-10
Factory AC Cab
Sure Fit Complete Kit

feller · 04-04-2011, 12:34 PM

72 k10 non ac cab options and pricing really interested in factory look
thanks

Tim R · 04-26-2011, 11:32 AM

Justin ,

Is the sale still available ? Could I get a price on a gen 4 kit ( I think thats what it is called its the one with the electronic control kit to use the factory ac panel) 70 GMC. I have the sanden compressor mounted already . I also have the factory ac control panel. but it was a non a/c truck .

Thanks Tim

tech@scottshotrods · 05-31-2011, 05:06 PM

Vintage air Special is still going on Call Us For Pricing

Whittaker · 05-31-2011, 05:38 PM

Do they make a front and rear kit for a 68 Suburban?

Also price. I have mounts for AC on BBC pass side.

I would need the rest.

tech@scottshotrods · 05-31-2011, 05:57 PM

Pm sent

Evanz67 · 06-07-2011, 12:44 AM

Dont know if this is where to ask but i would like to know if anyone sells a under the dash relocation kit for just the heater for a 67 chevy pickup. Any info would be appreciated thank you.

Scottshotrods · 06-07-2011, 11:48 AM

Quote:

Originally Posted by Evanz67

Dont know if this is where to ask but i would like to know if anyone sells a under the dash relocation kit for just the heater for a 67 chevy pickup. Any info would be appreciated thank you.

Vintage air does not have relocation kit for just heater for your truck.Sorry about that and I do not know where you might be able to fine one.

Justin

01-22-2011, 12:20 PM	#51
CHP c-10 Registered User Join Date: Jul 2010 Location: Napa, CA Posts: 34	Re: Vintage Air Sale Hey Justin, sent a pm also... (68 c-10 non ac cab, with 5.3l donor and compressor going in. Would like a price for the remaining bits, stock looking control panel (if avail). Availability? Are there vent options-add on under dash or nice looking vents in the dash? Thanks, Jonathan

01-26-2011, 09:32 AM	#52
71rustpile Registered User Join Date: Apr 2010 Location: Littleton, Co Posts: 61	Re: Vintage Air Sale Hi Justin, Could you get me a price on a kit for a non ac 70 Blazer? Thanks Dan

01-28-2011, 11:06 AM	#53
jimig1 Registered User Join Date: Jul 2010 Location: Elk River, MN Posts: 614	Re: Vintage Air Sale I sent a PM a few days ago and have not heard anything __________________ 55 2nd series Chevy Pickup 2019 Chevy Equinox(Daily driver) 2011 Chevy Malibu (Wife's car) MSRA Member I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose. -George Carlin

02-03-2011, 10:34 PM	#61
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Vintage Air Sale Can you get pieces? I need the adaptors that go on the stock side ac stock vents. I have system that was for a non ac truck and it came with those smaller vents that I'm not going to use. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-04-2011, 04:08 AM	#62
DUTCHMAN Registered User Join Date: Dec 1999 Location: the Netherlands Posts: 363	Re: Vintage Air Sale Hey Jon or Justin what price for a: 941170 1967-72 Complete Kit (Non-Factory Air Car) shipped to 75831 thanks __________________ 06 BMW 330d aut touring full option 83 Jeep CJ7 360 aut sold 71 GMC Suburban 67 Chevrolet C10 stepside 54 Ford F100 sold 49 Chevrolet coe 48 Ford f6 coe Strijen the Netherlands "NO MISTAKES NO PROGRESS"

03-21-2011, 10:04 PM	#65
BBC Motorhead Registered User Join Date: Nov 2010 Location: Bismarck North Dakota Posts: 71	Re: Vintage Air Sale Just wondering if this sale is still going? If so I need some info on the 941170 kit for non ac cab. Price and shipping to 58501? What style are the dash vents and is there any pics of them? What does the controls look like? Thanks

03-22-2011, 04:27 PM	#67
Nova_Cobra64 Registered User Join Date: Aug 2002 Location: Melville, SK Posts: 1,145	Re: Vintage Air Sale I exchanged PM's with Jon a while back and think I may have been lost in the shuffle a bit. I'm still interested in a price on a vintage air setup. The truck is a 69 GMC, non-factory air, LS3. I will already have a compressor as I'm installing the corvette accessory drive kit (19155067). I plan to use a Dakota Digital control as I don't care for the factory control too much. __________________ 2004 Silverado - Beater 1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683 2011 Aveo - Work commuter 2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck.

04-04-2011, 12:34 PM	#69
feller Registered User Join Date: Feb 2011 Location: madison, IN. Posts: 484	Re: Vintage Air Sale 72 k10 non ac cab options and pricing really interested in factory look thanks

04-26-2011, 11:32 AM	#70
Tim R Registered User Join Date: Jan 2009 Location: bmt,tx Posts: 127	Re: Vintage Air Sale Justin , Is the sale still available ? Could I get a price on a gen 4 kit ( I think thats what it is called its the one with the electronic control kit to use the factory ac panel) 70 GMC. I have the sanden compressor mounted already . I also have the factory ac control panel. but it was a non a/c truck . Thanks Tim

05-31-2011, 05:06 PM	#71
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Vintage Air Sale Vintage air Special is still going on Call Us For Pricing

05-31-2011, 05:38 PM	#72
Whittaker Registered User Join Date: Feb 2011 Location: Champaign, Illinois Posts: 110	Re: Vintage Air Sale Do they make a front and rear kit for a 68 Suburban? Also price. I have mounts for AC on BBC pass side. I would need the rest.

05-31-2011, 05:57 PM	#73
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Vintage Air Sale Pm sent

06-07-2011, 12:44 AM	#74
Evanz67 Registered User Join Date: Apr 2010 Location: Livingston, Ca. Posts: 73	Re: Vintage Air Sale Dont know if this is where to ask but i would like to know if anyone sells a under the dash relocation kit for just the heater for a 67 chevy pickup. Any info would be appreciated thank you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.