need a 1bbl carb for 250 I6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fattyarbuckle · 04-01-2011, 12:43 PM

Where is the best place to find a stock replacement carb for a 250 I6, auto choke?

I think (know) we need a rebuild but the phillips head screws that hold the two halfs together must have locktite on them because they are not budging!

I'm afraid to put heat on them until we have a scource for another in case this one is damaged...any suggestions or help would be appreciated.

Thanks

BadaSs_Cal · 04-01-2011, 12:51 PM

I got a real nice refurb one from ebay for $100.. or you can pay a little more and go with langdons 2 bbl weber, if their in stock.. I might go that way next.

fattyarbuckle · 04-01-2011, 12:56 PM

Quote:

Originally Posted by BadaSs_Cal

I got a real nice refurb one from ebay for $100.. or you can pay a little more and go with langdons 2 bbl weber, if their in stock.. I might go that way next.

You got a link for the langdons?

BadaSs_Cal · 04-01-2011, 01:27 PM

http://stoveboltengineco.com/index.p...roduct=1681888

He also has the adapter and the linkage for sale there... But maybe you can come up with something?? Try calling them up and see what they say.. I always hear they are very helpful.. Good luck!!!

68 IRON · 04-01-2011, 02:34 PM

Mr Arbuckle, heres a trick we use at work for stuck panels. Put a small dab of valve grinding compound on the tip of your screw driver and tap it into the philips head screw (just tap it lightly with a small hammer or another tool thats handy). Keeping downward pressure and not pulling driver off the head of the screw loosen it. The compound gives additional bite to keep the driver from spinning out and rounding the screw head. Just remeber to keep the pressure on the head of the screw after tapping the driver into the screw.

Shyguy · 04-01-2011, 02:53 PM

An impact screw driver may also work. I use to use one a lot when I rode dirt bikes.

fattyarbuckle · 04-01-2011, 02:57 PM

Quote:

Originally Posted by Shyguy

An impact screw driver may also work. I use to use one a lot when I rode dirt bikes.

We've already tried and impact driver and hit it hard enough that it should have broken so we stopped...LOL
I thought about cutting a straight slot in the head to get a flat blade on it but still think we should have something here in case it's trashed...

thanks everyone

Shyguy · 04-01-2011, 03:01 PM

Lowe's and Sears both carry screw extractors, these may work.

BadaSs_Cal · 04-01-2011, 03:27 PM

Can you just grind the little heads off then once you have the halves apart get a vice grip on them to twist off??? Thats what I would try...maybe with a dremel with a grinding disk.

fattyarbuckle · 04-01-2011, 04:08 PM

Quote:

Originally Posted by BadaSs_Cal

Can you just grind the little heads off then once you have the halves apart get a vice grip on them to twist off??? Thats what I would try...maybe with a dremel with a grinding disk.

yep, that is our last option...it will come apart, it's just a question if we destroy it or not...LOL

Wrenchbender Ret · 04-01-2011, 04:15 PM

Ive got some parts carbs if you need any parts for it. There were several different typs of chokes used on these through the years & the manifolds have to match. The best one is to find a carb with elactric choke. They work slick & will work on any manifold.
georgec2434@yahoo.com

**special-K** · 04-01-2011, 06:54 PM

What year is your ruck. I now the '72 Monojets are different.

04-01-2011, 12:43 PM	#1
fattyarbuckle Registered User Join Date: Nov 2010 Location: St. Louis Mo. Posts: 282	need a 1bbl carb for 250 I6 Where is the best place to find a stock replacement carb for a 250 I6, auto choke? I think (know) we need a rebuild but the phillips head screws that hold the two halfs together must have locktite on them because they are not budging! I'm afraid to put heat on them until we have a scource for another in case this one is damaged...any suggestions or help would be appreciated. Thanks

04-01-2011, 12:51 PM	#2
BadaSs_Cal Registered User Join Date: Feb 2010 Location: Walnut Grove, Ca Posts: 216	Re: need a 1bbl carb for 250 I6 I got a real nice refurb one from ebay for $100.. or you can pay a little more and go with langdons 2 bbl weber, if their in stock.. I might go that way next. __________________ 66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926

04-01-2011, 01:27 PM	#4
BadaSs_Cal Registered User Join Date: Feb 2010 Location: Walnut Grove, Ca Posts: 216	Re: need a 1bbl carb for 250 I6 http://stoveboltengineco.com/index.p...roduct=1681888 He also has the adapter and the linkage for sale there... But maybe you can come up with something?? Try calling them up and see what they say.. I always hear they are very helpful.. Good luck!!! __________________ 66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926

04-01-2011, 02:34 PM	#5
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: need a 1bbl carb for 250 I6 Mr Arbuckle, heres a trick we use at work for stuck panels. Put a small dab of valve grinding compound on the tip of your screw driver and tap it into the philips head screw (just tap it lightly with a small hammer or another tool thats handy). Keeping downward pressure and not pulling driver off the head of the screw loosen it. The compound gives additional bite to keep the driver from spinning out and rounding the screw head. Just remeber to keep the pressure on the head of the screw after tapping the driver into the screw.

04-01-2011, 02:53 PM	#6
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: need a 1bbl carb for 250 I6 An impact screw driver may also work. I use to use one a lot when I rode dirt bikes. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

04-01-2011, 03:01 PM	#8
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: need a 1bbl carb for 250 I6 Lowe's and Sears both carry screw extractors, these may work. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

04-01-2011, 03:27 PM	#9
BadaSs_Cal Registered User Join Date: Feb 2010 Location: Walnut Grove, Ca Posts: 216	Re: need a 1bbl carb for 250 I6 Can you just grind the little heads off then once you have the halves apart get a vice grip on them to twist off??? Thats what I would try...maybe with a dremel with a grinding disk. __________________ 66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926 Last edited by BadaSs_Cal; 04-01-2011 at 03:27 PM.

04-01-2011, 04:15 PM	#11
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: need a 1bbl carb for 250 I6 Ive got some parts carbs if you need any parts for it. There were several different typs of chokes used on these through the years & the manifolds have to match. The best one is to find a carb with elactric choke. They work slick & will work on any manifold. georgec2434@yahoo.com

04-01-2011, 06:54 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: need a 1bbl carb for 250 I6 What year is your ruck. I now the '72 Monojets are different. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.