Going to look at a 67! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 04-19-2011, 01:01 PM

If you offered me $200 I would tell you to leave my property immediately.

71sierragrande · 04-19-2011, 02:14 PM

If he wants you to leave the property, you can always leave the property whenever you want, but thats no reason to get ripped. If youre looking to part it out, then its worth more. Sounds to me like you are starting a project, which is a totally different thing. The bed looks gone, rockers and corners gone, motor is out along with god knows what else. Junk man wont pay much more than $250 just to break even, call him and ask. I just sold a '71 cheyenne for $250 with motor in it to the junkman cuz he could get it out of the way quickly. If this guy has any affection for the truck, he would prefer you have it to save rather than letting it get scrapped.

Operatorfailure · 04-19-2011, 08:21 PM

I am going to go look at it again but from what I saw the only parts of the bed that are rusty are the inside bottom corners and I am going to bag the truck and raise the bed floor so the rusty part will get cut out, the bedsides are really straight but the tailgate is shot. I am going to look at the frame and inside the cab and the seams where people posted about looking. If those are rusty I don't even want to mess with the truck.

Also, just found another truck, a 68. It looks better right off the bat but it looks like most of the body panels are kinda beat up. He wants $900, no motor or tranny but it obviously rolls around better than the first one.

71sierragrande · 04-19-2011, 09:13 PM

Much better!!! That truck looks solid, and easily worth $5-600 more than the '67. And it looks like he's got it started for you. It'll be alot less work in the long run. I would offer $700, then give him $900 if he holds firm. Great find!

jablack · 04-19-2011, 11:10 PM

I would offer no more than $350. Last year that was a $200 truck, but scrap prices have gone up. The bed doesn't look to bad and the fenders look pretty good. If I was closer I would buy it, but I buy one at least once a year..

Newtz67 · 04-19-2011, 11:22 PM

All this scrap talk makes me sick to my stomach...

OARNGESI · 04-19-2011, 11:24 PM

The bed alone on the 67 is worth 400 easy id offer between 500 and 750 worst comes to worst use that bed and frame and a clean lwb for parts

Newtz67 · 04-19-2011, 11:29 PM

Quote:

Originally Posted by OARNGESI

The bed alone on the 67 is worth 400 easy id offer between 500 and 750 worst comes to worst use that bed and frame and a clean lwb for parts

Agree 100%

Operatorfailure · 04-20-2011, 05:20 AM

Lol, it cracks me up the variety of responses. From heck no, don't even think about it that is a pile of crap to wow, that thing isn't bad I wish I was closer I would buy it.

MrGoodpliers · 04-20-2011, 09:15 AM

Yeah, the bed is the best thing about that truck. I'd probably give $500 for the '67.

Operatorfailure · 04-22-2011, 06:45 PM

Oh, and I'm terrible, also possibly looking at an old Dodge car. 51 Plymouth Cranbrook, its running with a flathead six in it right now. Would be a ton less work than the truck, and I already have one truck. Darn, why can't I just buy both?

Operatorfailure · 04-22-2011, 06:42 PM

Stopped and looked at it again, the parts that I thought were good aren't quite as good and the parts that I thought would be bad aren't as bad. The bed is really clean except how it mounts, the bars horizontal to the frame are shot. The cab isn't really bad at all, needs new cab corners and rockers and about a square foot area of the floorboard. Couldn't find any rust at all under the cowl at the seam area. Frame had no damage that I could find and it had surface rust but nothing a media blast wouldn't take care of. And I know you guys like pics!

Vintage Windmills · 04-22-2011, 08:17 PM

that car looks pretty sweet except for that skull. How much are they asking?

Operatorfailure · 04-22-2011, 08:40 PM

$2500 is what he is asking, I'm trying to con him into trading it and some cash for my quad.

*dajn* · 04-23-2011, 11:59 PM

I just sold my harley for chump change because I needed the money. the reason I say this is because there are so many semi desperate people right now selling things for prices unheard off a few years ago. I just bought another 68 chevy for $450. It has a real strong 350 in it and everything works on it. the body is terrible but so is that 67 your looking at. The point is if you are in the market to buy right now, you have the power. You can get insanely clean old chevy's for four to five grand right now. 500-1000 dollar trucks with bodies like that should have a motor and tranny in it.

04-19-2011, 01:01 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Going to look at a 67! If you offered me $200 I would tell you to leave my property immediately. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

04-19-2011, 02:14 PM	#2
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: Going to look at a 67! If he wants you to leave the property, you can always leave the property whenever you want, but thats no reason to get ripped. If youre looking to part it out, then its worth more. Sounds to me like you are starting a project, which is a totally different thing. The bed looks gone, rockers and corners gone, motor is out along with god knows what else. Junk man wont pay much more than $250 just to break even, call him and ask. I just sold a '71 cheyenne for $250 with motor in it to the junkman cuz he could get it out of the way quickly. If this guy has any affection for the truck, he would prefer you have it to save rather than letting it get scrapped. __________________ 1971 GMC Sierra Grande 2WD 1/2 ton, 350/400 auto 2008 Chevy Silverado 2WD 1/2 ton LT1 5.3L auto

04-19-2011, 08:21 PM	#3
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: Going to look at a 67! I am going to go look at it again but from what I saw the only parts of the bed that are rusty are the inside bottom corners and I am going to bag the truck and raise the bed floor so the rusty part will get cut out, the bedsides are really straight but the tailgate is shot. I am going to look at the frame and inside the cab and the seams where people posted about looking. If those are rusty I don't even want to mess with the truck. Also, just found another truck, a 68. It looks better right off the bat but it looks like most of the body panels are kinda beat up. He wants $900, no motor or tranny but it obviously rolls around better than the first one.

04-19-2011, 09:13 PM	#4
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: Going to look at a 67! Much better!!! That truck looks solid, and easily worth $5-600 more than the '67. And it looks like he's got it started for you. It'll be alot less work in the long run. I would offer $700, then give him $900 if he holds firm. Great find! __________________ 1971 GMC Sierra Grande 2WD 1/2 ton, 350/400 auto 2008 Chevy Silverado 2WD 1/2 ton LT1 5.3L auto

04-19-2011, 11:10 PM	#5
jablack Classic Chevy Recycler Join Date: Dec 2007 Location: Alabama Posts: 422	Re: Going to look at a 67! I would offer no more than $350. Last year that was a $200 truck, but scrap prices have gone up. The bed doesn't look to bad and the fenders look pretty good. If I was closer I would buy it, but I buy one at least once a year.. __________________ 2004 Chevrolet Trailblazer EXT 1970 Chevrolet C50 1979 Chevrolet C30 Need another 67 or 68 soon...

04-19-2011, 11:22 PM	#6
Newtz67 Registered User Join Date: Mar 2010 Location: A t w a t e r, Ca Posts: 1,201	Re: Going to look at a 67! All this scrap talk makes me sick to my stomach... __________________ My '67 short wide Our '68 Burb My '04 Z71 The '54 Belair The '69 Cadillac

04-19-2011, 11:24 PM	#7
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Going to look at a 67! The bed alone on the 67 is worth 400 easy id offer between 500 and 750 worst comes to worst use that bed and frame and a clean lwb for parts __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

04-20-2011, 05:20 AM	#9
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: Going to look at a 67! Lol, it cracks me up the variety of responses. From heck no, don't even think about it that is a pile of crap to wow, that thing isn't bad I wish I was closer I would buy it.

04-20-2011, 09:15 AM	#10
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: Going to look at a 67! Yeah, the bed is the best thing about that truck. I'd probably give $500 for the '67. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

04-22-2011, 06:45 PM	#11
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: Going to look at a 67! Oh, and I'm terrible, also possibly looking at an old Dodge car. 51 Plymouth Cranbrook, its running with a flathead six in it right now. Would be a ton less work than the truck, and I already have one truck. Darn, why can't I just buy both?

04-22-2011, 06:42 PM	#12
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: Going to look at a 67! Stopped and looked at it again, the parts that I thought were good aren't quite as good and the parts that I thought would be bad aren't as bad. The bed is really clean except how it mounts, the bars horizontal to the frame are shot. The cab isn't really bad at all, needs new cab corners and rockers and about a square foot area of the floorboard. Couldn't find any rust at all under the cowl at the seam area. Frame had no damage that I could find and it had surface rust but nothing a media blast wouldn't take care of. And I know you guys like pics!

04-22-2011, 08:17 PM	#13
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Going to look at a 67! that car looks pretty sweet except for that skull. How much are they asking? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-22-2011, 08:40 PM	#14
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: Going to look at a 67! $2500 is what he is asking, I'm trying to con him into trading it and some cash for my quad.

04-23-2011, 11:59 PM	#15
dajn Account Suspended Join Date: Feb 2011 Location: Ogilvie Minnesota Posts: 461	Re: Going to look at a 67! I just sold my harley for chump change because I needed the money. the reason I say this is because there are so many semi desperate people right now selling things for prices unheard off a few years ago. I just bought another 68 chevy for $450. It has a real strong 350 in it and everything works on it. the body is terrible but so is that 67 your looking at. The point is if you are in the market to buy right now, you have the power. You can get insanely clean old chevy's for four to five grand right now. 500-1000 dollar trucks with bodies like that should have a motor and tranny in it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.