The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Forums > Alternate Tinkerings

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-12-2011, 08:54 AM   #1
Mr Pops
Ridin' Dirty
 
Mr Pops's Avatar
 
Join Date: Oct 2009
Location: Ardrossan Alberta Canada
Posts: 2,193
Buying a trailer-Should I get Leaf spring or Torsion Bar?

Hey folks, I'm in the market for a tilt deck car hauler trailer, probably 18'-22'.
Whats better for trailer suspension, leaf springs or torsion bar? I plan on using the trailer to haul cars and pickup trucks and also to haul water for my acreage with a water tank that weighs just under 3000lbs loaded.
I've been told that leaf springs are cheaper and easier to replace, but also easily bent if you turn the trailer too sharp while backing with a load.
I want a tilt deck for better approach angles for loading small cars and also to aid in dumping water. Is there a type of tilt deck I should watch out for?
Thanks for any info!
Attached Images
 
__________________
1978 C3500 Crewcab (Project)
1979 C2500 Crewcab (Driver/project)
1988 R2500 Crewcab (Driver)
1988 V3500 Crewcab
1988 R2500 Crewcab (Mint, Ex Fire Dept)
1968 Chev Suburban (4x4 conversion) LINK
1970 Chev C20 Suburban (driver/cruiser)LINK
2005 Impala (Incognito vehicle)
2004 Yukon XL Denali (Kid hauler)
1947 Case tractor
Facebook Page(1000's of pictures of GM cars and trucks organized into albums)
YouTube Channel

Last edited by Mr Pops; 04-12-2011 at 11:24 PM.
Mr Pops is offline   Reply With Quote
Old 04-12-2011, 11:19 PM   #2
Mr Pops
Ridin' Dirty
 
Mr Pops's Avatar
 
Join Date: Oct 2009
Location: Ardrossan Alberta Canada
Posts: 2,193
Re: Buying a trailer-Leaf or Torsion Bar?

..
Attached Images
 
__________________
1978 C3500 Crewcab (Project)
1979 C2500 Crewcab (Driver/project)
1988 R2500 Crewcab (Driver)
1988 V3500 Crewcab
1988 R2500 Crewcab (Mint, Ex Fire Dept)
1968 Chev Suburban (4x4 conversion) LINK
1970 Chev C20 Suburban (driver/cruiser)LINK
2005 Impala (Incognito vehicle)
2004 Yukon XL Denali (Kid hauler)
1947 Case tractor
Facebook Page(1000's of pictures of GM cars and trucks organized into albums)
YouTube Channel
Mr Pops is offline   Reply With Quote
Old 04-13-2011, 12:18 AM   #3
trixter99
I have no time for this
 
trixter99's Avatar
 
Join Date: Dec 2002
Location: Fort St John B.C. CANADA
Posts: 434
Re: Buying a trailer-Leaf or Torsion Bar?

I bought a 16x7 cargo trailer to haul my dirt bikes in and Im wish that I would have sprung for the torsian axles. The spring axles are cheap to replace but the torsion axles make the trailer lower and alot quiter.
__________________
1986 Chevy short box ( PROJECT )
1994 Chevy Blazer lifted 6"
2009 Gmc 2500 HD
1999 Hugger orange Camaro SS
2007 BMW X5 Sport
trixter99 is offline   Reply With Quote
Old 04-13-2011, 07:38 PM   #4
Mr Pops
Ridin' Dirty
 
Mr Pops's Avatar
 
Join Date: Oct 2009
Location: Ardrossan Alberta Canada
Posts: 2,193
Re: Buying a trailer-Leaf or Torsion Bar?

Thanks for the info. Anybody had problems with bending leaf shackles, or is the trailer sales guy just trying to scare me into buying his torsion bar sprung trailer??
__________________
1978 C3500 Crewcab (Project)
1979 C2500 Crewcab (Driver/project)
1988 R2500 Crewcab (Driver)
1988 V3500 Crewcab
1988 R2500 Crewcab (Mint, Ex Fire Dept)
1968 Chev Suburban (4x4 conversion) LINK
1970 Chev C20 Suburban (driver/cruiser)LINK
2005 Impala (Incognito vehicle)
2004 Yukon XL Denali (Kid hauler)
1947 Case tractor
Facebook Page(1000's of pictures of GM cars and trucks organized into albums)
YouTube Channel
Mr Pops is offline   Reply With Quote
Old 04-14-2011, 10:12 PM   #5
BlueJeep
Registered User
 
BlueJeep's Avatar
 
Join Date: Mar 2008
Location: Waukee, Iowa
Posts: 1,608
Re: Buying a trailer-Leaf or Torsion Bar?

I have a 12K lb 20' flat bed with a tilt deck. I specifically ordered this one with torsion axles knowing I would be pulling it with a 1/2 ton Suburban....and I LOVE it. It pulls so much smoother empty than any leaf sprung trailer I've ever pulled. I think leafs vs. torsion is a personal preference. The torsion axles don't have much wheel travel, but I'm fine with that.

I think the salesman is pulling your leg, but decide what your needs are and then choose which one better suits those needs.
__________________
build threads:

86 Suburban
88 Jeep 6.0 swap
49 Chevy truck
54 Chevy wagon

86 Suburban lowered 4/6
54 Chevy wagon
49 Chevy/s10 mix
88 Jeep Wrangler rockcrawler

Last edited by BlueJeep; 04-14-2011 at 10:13 PM.
BlueJeep is offline   Reply With Quote
Old 04-14-2011, 11:04 PM   #6
Mr Pops
Ridin' Dirty
 
Mr Pops's Avatar
 
Join Date: Oct 2009
Location: Ardrossan Alberta Canada
Posts: 2,193
Re: Buying a trailer-Leaf or Torsion Bar?

This is good info. Thanks
__________________
1978 C3500 Crewcab (Project)
1979 C2500 Crewcab (Driver/project)
1988 R2500 Crewcab (Driver)
1988 V3500 Crewcab
1988 R2500 Crewcab (Mint, Ex Fire Dept)
1968 Chev Suburban (4x4 conversion) LINK
1970 Chev C20 Suburban (driver/cruiser)LINK
2005 Impala (Incognito vehicle)
2004 Yukon XL Denali (Kid hauler)
1947 Case tractor
Facebook Page(1000's of pictures of GM cars and trucks organized into albums)
YouTube Channel
Mr Pops is offline   Reply With Quote
Reply

Bookmarks

Tags
car, hauler, tilt, trailers, trialer


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com