exhaust??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PureChevy · 07-18-2003, 10:07 AM

I am having the most awful time deciding what kind of mufflers i want to put on. My truck already has a dual exhaust with truck mufflers and heddman headers. It is too quiet. I want something louder but not obnoxious. I dont want to have to turn my truck off at a drive through. I am looking at maybe the delta 50 series from flowmaster. I went to their website but the only sound clip they have is from a 67 camaro with a 383 stroker. I dont think that is a fair comparison. Because of the dual exhaust, i will need to mufflers. Do i need an H pipe? Let me know what yall think.
Also, if anyone has any sound clips post em up.

sorry for this thread. I am sure it has been posted many times. If the search feature worked i would have used it.

thanks
Will

68CST327 · 07-18-2003, 10:23 AM

I too went through a horrible, agonizing time trying to decide on mufflers. I went with Magnaflows and couldn't be happier. They are nice and mellow when you are cruising and at idle, so they aren't obnoxious, but sound nice and mean when you step on it! They are great. I would get an H-pipe while you're at it.

PureChevy · 07-18-2003, 10:26 AM

where did you purchase the magnaflows??

PureChevy · 07-18-2003, 10:38 AM

also, which ones did you get??

68CST327 · 07-18-2003, 10:47 AM

I got them from a local muffler shop. I got the Magnaflow XL's.

http://www.magnaflow.com/02product/xl/xlperformance.htm

SweetandLong68 · 07-18-2003, 10:51 AM

Check out the Hooker AeroChamber mufflers.

They are half chambered (like a Flowmaster) and half stainless steel packed (like a Borla). The give ya a Nice deep sound but still loud enough to hear but not overbearing. Not all that loud inside the cab. Best of both worlds IMO.

check em out.

May want to consider an H-pipe as well. That will bring the sound level down a little bit as well and help make some poWa!
lata
CHRIS

SweetandLong68 · 07-18-2003, 10:54 AM

Here is a pic of the muffler. I am running these on my 68. 2.5inch inlet/outlet. Run you about 60$ a piece. About half what a Flowmaster will run you these days!

lata
CHRIS

miket · 07-18-2003, 11:27 AM

short clip of 2.5" duals out the back with 2 chamber flow masters (40's) on my 502.

383 Stroker · 07-18-2003, 11:29 AM

Here is a link to my 85 Silverado with Flowmaster 50 series Delta Flow. http://www.geocities.com/ryan98gt/ss350.html

mtdave2 · 07-18-2003, 11:34 AM

magnaflows all the way,, i love those things.. ill try to post a sound file

miket · 07-18-2003, 01:04 PM

just for fun, I added a page to my site thats still under construction....on it are clips of my 71 with 3inch pipes and 40 series flows, my 2001 Suburban/496 with dynomax's...later I will add the Chevelle withthe magnaflows...hope this helps...

http://www.speakeasy.org/~miket/quick_sound_clips.htm

mtdave2 · 07-18-2003, 01:11 PM

how big of a cam do you have in the 71? nice sound, but i bet its loud!

miket · 07-18-2003, 01:19 PM

It's the ZZ roller cam....I will be adding the specs from the motor to the website shortly...I will be adding roller rockers and probably stepping up the cam abit...I would like to see something closer to 600HP.

mtdave2 · 07-19-2003, 12:03 PM

http://mtdave2.com/tword.rm

this should work now.

mtdave2 · 07-19-2003, 12:09 PM

http://mtdave2.com/driveway.rm

another..

SweetandLong68 · 07-19-2003, 12:10 PM

Quote:

Originally posted by mtdave2
http://mtdave2.com/twe.mpg

see if that works.. its not the one i was looking for but it will do..

I couldnt get this one to work...Says the file is corrupt or something like that. Maybe it is just me.

lata
CHRIS

SweetandLong68 · 07-19-2003, 12:13 PM

Quote:

Originally posted by mtdave2
http://mtdave2.com/driveway.rm

another..

Haha Got this one to work but everytime you start playing the sound your website pops up! hahaha Sounds alright tho. What kind of mufflers and whatnot are you running?

lata
CHRIS

mtdave2 · 07-19-2003, 12:18 PM

not sure why that is happing! drives me nuts!

the are duel magnaflows. i love them. nice and quite untill you step on it.

SweetandLong68 · 07-19-2003, 12:34 PM

Sounds good! I am going with 2.5" dual Aerochambers. See how those sound

lata
CHRIS

68CST327 · 07-19-2003, 02:09 PM

Quote:

Originally posted by SweetandLong68

I couldnt get this one to work...Says the file is corrupt or something like that. Maybe it is just me.

lata
CHRIS

Rename the extension to .rm and it should work.

mtdave2 · 07-19-2003, 11:43 PM

working now right?

07-18-2003, 10:07 AM	#1
PureChevy Registered User Join Date: Jun 2003 Location: Hickory, North Carolina Posts: 340	exhaust??? I am having the most awful time deciding what kind of mufflers i want to put on. My truck already has a dual exhaust with truck mufflers and heddman headers. It is too quiet. I want something louder but not obnoxious. I dont want to have to turn my truck off at a drive through. I am looking at maybe the delta 50 series from flowmaster. I went to their website but the only sound clip they have is from a 67 camaro with a 383 stroker. I dont think that is a fair comparison. Because of the dual exhaust, i will need to mufflers. Do i need an H pipe? Let me know what yall think. Also, if anyone has any sound clips post em up. sorry for this thread. I am sure it has been posted many times. If the search feature worked i would have used it. thanks Will __________________ 1972 k10 4x4 LWB (Sold in 2005)

07-18-2003, 10:26 AM	#3
PureChevy Registered User Join Date: Jun 2003 Location: Hickory, North Carolina Posts: 340	where did you purchase the magnaflows?? __________________ 1972 k10 4x4 LWB (Sold in 2005)

07-18-2003, 10:38 AM	#4
PureChevy Registered User Join Date: Jun 2003 Location: Hickory, North Carolina Posts: 340	also, which ones did you get?? __________________ 1972 k10 4x4 LWB (Sold in 2005)

07-18-2003, 10:51 AM	#6
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Check out the Hooker AeroChamber mufflers. They are half chambered (like a Flowmaster) and half stainless steel packed (like a Borla). The give ya a Nice deep sound but still loud enough to hear but not overbearing. Not all that loud inside the cab. Best of both worlds IMO. check em out. May want to consider an H-pipe as well. That will bring the sound level down a little bit as well and help make some poWa! lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

07-18-2003, 10:54 AM	#7
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Here is a pic of the muffler. I am running these on my 68. 2.5inch inlet/outlet. Run you about 60$ a piece. About half what a Flowmaster will run you these days! lata CHRIS Attached Images __________________ 68 C10 shortbed -- Street/Strip Last edited by SweetandLong68; 07-18-2003 at 10:59 AM.

07-18-2003, 10:23 AM	#2
68CST327 Registered User Join Date: Aug 2002 Location: USA Posts: 443	I too went through a horrible, agonizing time trying to decide on mufflers. I went with Magnaflows and couldn't be happier. They are nice and mellow when you are cruising and at idle, so they aren't obnoxious, but sound nice and mean when you step on it! They are great. I would get an H-pipe while you're at it.

07-18-2003, 10:47 AM	#5
68CST327 Registered User Join Date: Aug 2002 Location: USA Posts: 443	I got them from a local muffler shop. I got the Magnaflow XL's. http://www.magnaflow.com/02product/xl/xlperformance.htm

07-18-2003, 11:29 AM	#9
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Here is a link to my 85 Silverado with Flowmaster 50 series Delta Flow. http://www.geocities.com/ryan98gt/ss350.html __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

07-18-2003, 11:34 AM	#10
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	magnaflows all the way,, i love those things.. ill try to post a sound file __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

07-18-2003, 01:04 PM	#11
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	just for fun, I added a page to my site thats still under construction....on it are clips of my 71 with 3inch pipes and 40 series flows, my 2001 Suburban/496 with dynomax's...later I will add the Chevelle withthe magnaflows...hope this helps... http://www.speakeasy.org/~miket/quick_sound_clips.htm __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

07-18-2003, 01:11 PM	#12
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	how big of a cam do you have in the 71? nice sound, but i bet its loud! __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

07-18-2003, 01:19 PM	#13
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	It's the ZZ roller cam....I will be adding the specs from the motor to the website shortly...I will be adding roller rockers and probably stepping up the cam abit...I would like to see something closer to 600HP. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

07-19-2003, 12:03 PM	#14
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	http://mtdave2.com/tword.rm this should work now. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban Last edited by mtdave2; 07-19-2003 at 02:39 PM.

07-19-2003, 12:09 PM	#15
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	http://mtdave2.com/driveway.rm another.. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

07-19-2003, 12:18 PM	#18
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	not sure why that is happing! drives me nuts! the are duel magnaflows. i love them. nice and quite untill you step on it. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban



Register or Log In To remove these advertisements.

07-19-2003, 12:34 PM	#19
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	Sounds good! I am going with 2.5" dual Aerochambers. See how those sound lata CHRIS __________________ 68 C10 shortbed -- Street/Strip

07-19-2003, 11:43 PM	#21
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,508	working now right? __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

Register or Log In To remove these advertisements.