NC consoles

[67/72junkie]

3 cup holder consoles.all have been stripped ,cleaned,primed and painted.1st is black very good driver.one hole in the bottom was pulled thru,cracked at rear corner and cup holder.damage was epoxy repaired.chrome trim has some rust pits.$175 shipped scobydobydoo has first option at it. 2nd is medium blue slightly darker than factory as I messed up and used black primer.excellent shape and was reassembled with stainless hardware $275 shipped 3rd is black and the best of them.$300 shipped.Jimbob has first shot at this one.





I stripped 4 and used the best parts to reassemble 3 good ones.I can take better close up pics for anyone interested .I have chevy and gmc emblems however you want them.

[67/72junkie]

console #1 is sold.here are some more pics of #3 for Jimbob.It is finished in satin black and is excellent.

[67/72junkie]

pics of blue console.consoles this nice are hard to find.



note how nice chrome trim ,emblems and latches are.No rust and pits here!I have 1 more console that is stripped bare ready to restore in your color.It is perfect! No cracks or damage to any parts.chrome,emblem, latch, strap all are as nice as you will find.You can prime and paint to match your show truck.$300 plus shipping for this one.

[67/72junkie]

I have one more console stripped ready to be painted.It is as good as you can find.No cracks or damage to any piece.Chrome trim,emblem,latch,strap and all original bolts and screws are super nice.I was saving this one for myself but I need funds for something else.You can prime and paint to match your show truck.$300 plus shipping.These are the best parts from the last 10 consoles I have disassembled.I can take pics of all parts laid out for anyone interested.

[Zoomin]

Originally Posted by 67/72junkie

I have one more console stripped ready to be painted.It is as good as you can find.No cracks or damage to any piece.Chrome trim,emblem,latch,strap and all original bolts and screws are super nice.I was saving this one for myself but I need funds for something else.You can prime and paint to match your show truck.$300 plus shipping.These are the best parts from the last 10 consoles I have disassembled.I can take pics of all parts laid out for anyone interested.

I'll take this, pending pics and shipping to 73151.

[67/72junkie]

I will get you some good close pics of all the parts for it tomorrow after work.You will not find a better all original console.forgot to ask chevy or gmc emblem

[PortHeadlight]

If it's not too much trouble, could you please provide the dimensions of one of these consoles. I need the "longest length" from front to back, as well as the height at both the front and back. And the length of the top that opens. Would like to use this style as a console in my burb, but not in the usual location. "Size matters." If it fits, very interested in a black chevy one. Thanks in advance...

[67/72junkie]

Consoles are 22" long x 11" wide x 11" tall.Zoomin got you some pics just haven't gotten them down loaded been very busy.Today is my stepsons birthday and we are going to have a party at the pond.I have another console to ship in the morning and I will get shipping quote then.

[PortHeadlight]

Thanks for quick reply. Shucks. They are about 6" too long for the use I had in mind. Wanted to use the right vintage but looks like i will have to go with a newer year. Again, appreciate you taking measurements and have fun at the party!

[Zoomin]

Originally Posted by 67/72junkie

Consoles are 22" long x 11" wide x 11" tall.Zoomin got you some pics just haven't gotten them down loaded been very busy.Today is my stepsons birthday and we are going to have a party at the pond.I have another console to ship in the morning and I will get shipping quote then.

Not a problem, thanks.
Posted via Mobile Device

[67/72junkie]

pics for zoomin

[67/72junkie]

I forgot to lay out the hinge but it is perfect no rust or pits.I will sand blast the heads of the bolts that get painted in my cabinet and e prime.trim ring is nice just need polished.No chips ,nicks gouges in upper,lower or the lid.Grain is very nice.I stripped these parts by soaking in a gallon of lacquer thinner and rubbing with a bristle brush to keep the grain as nice as possible.On each side right where the bolt goes thru to bolt it together there is a small spot about as big as a penny that is worn the grain smooth from the seats rubbing against it.cannot be seen when installed.you should be able to see this in the pics.

shipping is $25 A couple q-tips and a drink cap of lacquer thinner will clean up the paint residue in the corners etc.I stripped a couple consoles at once so my thinner was getting dirty.also need to know if you want chevy or gmc emblem.I have both in nice condition.

[Zoomin]

PM sent
Posted via Mobile Device

[67/72junkie]

pics for zoomin







first 3 pics are at the show spring of 2010 4th pic is of blazer mounts I redid and the last is my seats

[Zoomin]

Nice work!
Posted via Mobile Device

[67/72junkie]

The first three pics are Jerry Brown's stuff.He is a nice old southern gentleman and has nice trucks and parts.I am expecting my highlander covers in a few days and I will post pics as soon as I get them on.I just had the same covers made. the seats are stripped ready for the covers.

[sbsandgren]

What consoles are left for sale. Would like one in excellent shape. Thanks Stan.

[67/72junkie]

only the first one from the 3 pictured is sold.Blue one is $275 shipped black one is $300 shipped both are very nice Blue is not a factory color and black as a very small nick in the lid you can see in pics.priced accordingly .Zoomin decided to go with a seat belt style and has paid me for a prefect flawless show ready one.will have pics of it as soon as sem color dries and new trim arrives.I have all parts for 1 more cup holder style that can be assembled with no flaws.It is $300 plus shipping all you have to do is e prime and paint in your color.I can paint and assemble this one in color of your choice for $350 shipped.

[67/72junkie]

close up of nick on the lid.

[screaminchevypickup]

Do you have any emblems you would sell by its self
Posted via Mobile Device

[67/72junkie]

sorry no emblems.

[sbsandgren]

Would like one like zoomin in satin black shipped to 95993 if at all possible. Thanks Stan

[67/72junkie]

Pics for zoomin.first pic is back of 72 parchment door panel never seen sun and looks new for correct color match.I have color chip from sem color ,light parchment and super white.I stripped small section of parts console and sprayed with super white.It is a much better match than what they have as light parchment.next 2 pics are material from 72 truck world bucket seat covers new that is going in my truck.Parchment blue and white highlander.I am going with the super white for my console ,door panels, etc on my personal truck.You requested parchment for you console.The sem color super white is a much better match to the gm parchment interior.I what to use sem color so in the future if something happens and your console gets scratched or you need to redo your door panels etc you will be able match it up.

[Zoomin]

I agree, Super White is the way to go. Thanks for doing the research!
Posted via Mobile Device

[67/72junkie]

Stan payment received.I picked up sem color satin black for your console today #15243 and super white #15103 for zoomin.I have both your consoles and 1 for me ready for paint.I am going to spray all 3 first thing tomorrow.I will post you guys some pics tomorrow afternoon.You guys write these #s down just in case you need them later.I love making old stuff look new.Also do you guys want them assembled with the original style bolts painted or stainless?your choice.