OR 100's of misc parts from the last 6 trucks parted out

[ScottieB]

how much of this do you have?
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=65

[cxune]

Hey - looking for a drum brake adjustment assembly for passenger side rear on a '71- the two parts that thread together and the cap. Hopefully for not too much money? : )

[Senorx]

Looking for the Orange lenses (rectangle) that go on the bumper of a 71-72. Would like nice driver to higher quality. Thanks.

[tll74]

Originally Posted by ScottieB

Can you please show me the 2 different gas pedals?
I want the pull cable, does it have the bracket that holds the handle? etc
If the wiper and coolant tanks are for our trucks (brackets too??) and hold liquid, I want them. If they are universal, I do not.
I am looking for the 80s / up horn grounding thing where you push on the horn and it blows. mine doesn't really work right. do you have one of them? The spring moves around and fails to make a ground
Pic of inside of mine: https://dl.dropboxusercontent.com/u/...905_110157.jpg

Do you have the 80's clock for cluster? (just the clock)
Do you have a Tach that works and will fit in the 3 3/8 empty gauge for our 69-72 clusters?

I'll get pics of the pedals.
Hood cable...yes it has the bracket that holds the cable. The bracket is part of the cable assy.
The 67-72's didn't have a washer pump incorporated in the bottle. GM trucks didn't offer this till 1985. It would work but not correct. I don't have a coolant tank as GM didn't offer them on 67-72's. I believe it was offered as a over counter accessory service part but rare.
I'll look into the horn.
Should have the clock. 20.00
Nothing on the tach.
I'll look into the ducts. I have complete AC change overs. I'll double check for some loose ducts.

Originally Posted by cxune

Hey - looking for a drum brake adjustment assembly for passenger side rear on a '71- the two parts that thread together and the cap. Hopefully for not too much money? : )

5.00 plus 5.00 usps shipping

Originally Posted by Senorx

Looking for the Orange lenses (rectangle) that go on the bumper of a 71-72. Would like nice driver to higher quality. Thanks.

Very nice pair for 25.00 plus 11.30 usps shipping


Thanks, Tom

[Senorx]

Originally Posted by tll74

Very nice pair for 25.00 plus 11.30 usps shipping


Thanks, Tom

Is this just for the lenses or the whole housing? Just curious because of the shipping cost. The location is 78052. Nevertheless I'll take em. Where do I send payment? Thanks.

[Undone]

Any sandlewood arm rest?

[54blackhornet]

Tom, I want to install a HEI in my 71 GMC, would you have one ?

[ScottieB]

great, i'll await your response. The person in this thread below has some stuff for $60 ... but if you will combine shipping and have what he has, then I'll get it from you.

http://67-72chevytrucks.com/vboard/s...0&postcount=39

[tll74]

Originally Posted by ScottieB

great, i'll await your response. The person in this thread below has some stuff for $60 ... but if you will combine shipping and have what he has, then I'll get it from you.

http://67-72chevytrucks.com/vboard/s...0&postcount=39

What all do you need in the pic?
I only have the standard pedal.

[ScottieB]

Originally Posted by tll74

What all do you need in the pic?
I only have the standard pedal.

that pedal is fine, do you have the 'bar' that hooks up too? I have a bar and a *nub* lol

If you have all of what that guy has in the pic, then i'll take it.
(http://67-72chevytrucks.com/vboard/s...0&postcount=39)

if not, let me know so i can purchase it from him

[67-72trucks]

Hello
interested in a couple clean original 69-72 steering column intermediate shafts.

Thanks
Mike

[tll74]

Originally Posted by 67-72trucks

Hello
interested in a couple clean original 69-72 steering column intermediate shafts.

Thanks
Mike

Mike, sure no problem. Hot tanked, acid dipped and ready for paint. I have 20 plus of them to pick from. 60.00 on a pair plus shipping. Thanks, Tom

[67-72trucks]

Originally Posted by tll74

Mike, sure no problem. Hot tanked, acid dipped and ready for paint. I have 20 plus of them to pick from. 60.00 on a pair plus shipping. Thanks, Tom

I would be interested in 3. Also looking for a pair of original black sun visors for my 72.
Also black oem defrost vents

[ScottieB]

Alright sounds good. Add it to my list. Can you show me the arm?

Can you tell me the list of stuff that I am getting from u and the cost + shipping cost so far? Thanks

[54blackhornet]

Tom, if you have a good Height bring it to Brian's when you come ok ? Don't forget the air filter stud and wing nut also.....

[tll74]

Originally Posted by 67-72trucks

I would be interested in 3. Also looking for a pair of original black sun visors for my 72.
Also black oem defrost vents

PM sent

Originally Posted by ScottieB

Alright sounds good. Add it to my list. Can you show me the arm?

Can you tell me the list of stuff that I am getting from u and the cost + shipping cost so far? Thanks

AC plastic ducts (that match the post of other member) 60.00
67-68 std gas pedal 7.50
Hood release cable 15.00
W/S washer bottle with pump (unsure it you want) 20.00
Did I miss anything?
Will have to get shipping cost on Monday.

Originally Posted by 54blackhornet

Tom, if you have a good Height bring it to Brian's when you come ok ? Don't forget the air filter stud and wing nut also.....

Jack, sounds good will do.

Originally Posted by Undone

1969

Still looking for the armrest.

Thanks, Tom

[ScottieB]

Originally Posted by tll74

PM sent

AC plastic ducts (that match the post of other member) 60.00
67-68 std gas pedal 7.50
Hood release cable 15.00
W/S washer bottle with pump (unsure it you want) 20.00
Did I miss anything?
Will have to get shipping cost on Monday.


Jack, sounds good will do.

Still looking for the armrest.

Thanks, Tom

1969:
Washer bottle and pump

Do you have the fan and plug hookup for fan?
Mine is all there, but I got in my switch today and nothing turns on. idk if my fan is broken or not. Please include whatever you have for the A/C / Heater setup and tell me the balance, I just want my heater to work already
I have a new aluminum heater core, i do not need yours

I need wiring and connectors that go to heater components if possible, if you sold the harness, that's fine.

I need the glovebox handle thing ... on the front where you 'pull' to open it... mine is broken off. 2 of those if you have them
I also need the back of the lock case (shell, i guess you would call it) for my 70

Do you have the 'tool bag' that goes behind our seat on the passenger side? is that where the jack went? or just tools?
Trim that goes around rear taillights x2

passenger inner arm rest (mine is cracked) - one that is in driveable condition is fine (black preferred, or olive green)
do you have newer shoulder + lap seat belts and mounting hardware? green if possible, black otherwise. If you don't have the new stuff ... do you have an extra lap belt for middle passenger?

Need a dome lens that's not melted
i need 2 amber and 2 red side marker lenses that aren't broken in 2. rubber too if it's good

2 fender bowtie / c10 emblems
v8 383 badges x4 if you got em

New rubber - if you have new rubber for any part of the truck, i'll need it... unless you know of a good quality (cost effective) rubber kit for our trucks? don't need old rubber at all. I have rubber, but it's going bad

Do you have a conversion kit to make a non-tilting seat into a tilting seat?

I need 2 knobs that will stop coming out when I tug on them... for Headlights and for Washer. Mine twist off

1970:
I need a driver outside door button for handle... not the handle itself, but the push button. the one in my 70 is jammed in there.. so whatever i need to fix that
I need a driver inner door handle too, the one that you turn to get out of the truck, that one is missing.

proportion valve x2 if you got em
master cylinder (from any year model) and brake booster. not leaking. rod too (bundle please)
power steering gear box and any mounting hardware

[tll74]

ScottieB;
1969:
Washer bottle and pump...as mentioned a 85-up type. 20.00

Do you have the fan and plug hookup for fan?.....20.00 on AC fan. I have to pull the AC stuff. Let me get it out and see what all I have.

I need wiring and connectors that go to heater components if possible, if you sold the harness, that's fine..... We'll see after I remove the assy.

I need the glovebox handle thing ...There is no handle on the glove box door. I have the lock retainer on the back side of the button. 3.00

Do you have the 'tool bag' that goes behind our seat on the passenger side? is that where the jack went? or just tools?....... I'll check for a bag. The tool kit goes in the bag and the jack mounts to the cab floor in the RH corner.
Trim that goes around rear taillights x2...no good ones right now

passenger inner arm rest (mine is cracked) - one that is in driveable condition is fine (black preferred, or olive green)....Black or olive 25.00 each for nice ones
do you have newer shoulder + lap seat belts and mounting hardware? green if possible, black otherwise. If you don't have the new stuff ... do you have an extra lap belt for middle passenger? No belts

Need a dome lens that's not melted....I'll check
i need 2 amber and 2 red side marker lenses that aren't broken in 2. rubber too if it's good...Yes on both but no gaskets. 40.00 fronts will have some fade.

2 fender bowtie / c10 emblems....69's didn't have the the bowtie. Do mean 67-68 emblems?
v8 383 badges x4 if you got em....none of these. Your going to have to buy these new.

New rubber - ....Brothers, The Truck Shop, Golden State and etc. could help you out on this. Also some vendors here on the site.

Do you have a conversion kit to make a non-tilting seat into a tilting seat?...nothing

I need 2 knobs that will stop coming out when I tug on them... for Headlights and for Washer. Mine twist off ....Yes, std or deluxe? 5.00 for each either way.

1970:
I need a driver outside door button for handle... not the handle itself, but the push button. the one in my 70 is jammed in there.. so whatever i need to fix that...you will need a new or used handle assy. Your handle is bad where the retainer plate is secured. 25.00 for a handle assy.
I need a driver inner door handle too, the one that you turn to get out of the truck, that one is missing....7.50

proportion valve x2 if you got em.....67-70 type 25.00 each
master cylinder (from any year model) and brake booster. not leaking. rod too (bundle please)...75.00 for booster assy with brackets and rod.
power steering gear box and any mounting hardware....2wd P/S gear 65.00 with mounting bolts.

[Hunter67stepside]

Any chance you would have any of the following for my 67 step side. 1) working cigarette lighter 2) white nylon, spring and pin for a door striker 3) emergency cable guide hooks (need 2). Shipping to nashville

[NurseBen]

Hello Tom, any chance of having two round door mirrors? Look to be about 5-6 inches in radius. Thank you for your time, Ben.

[Norgermish]

PM sent about E brake cables

[BrokenArrow1971]

tom,

do you have a green cigarette lighter(not sure if they made it but my radio is green) if not i will take black one.

one window crank- passengerside

one back up lens for passinger side 71 c20

one telescoping antenna

do you have front bumper amber turn/parking lenses? need two

let me know about these parts. i will use paypal

[BrokenArrow1971]

tom,

i am also looking for dark olive arm rests for passinger and driver doors. cant find your ad today- not sure why. let me know how much for both.

havent found your response from my first inquiry...

thanks. Todd

[BrokenArrow1971]

Tom,

I need the dark green arms rests to fit a 71- if you still have them.

thanks. Todd

[54blackhornet]

Tom,
I need a metal fuel line, pump to Qjet with side entry.thanks