![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2009
Location: stouffville ontario
Posts: 166
|
turbo 350 to 700r4
hey guys im converting my 3 on the tree to 4 on the floor ( both auto ) besides the shorter driveshaft what else do i need to do? apparently the floor conversion is easy but do i have to do crossmember work for the 700r4? any input would be appreciated its a 1979 c 10 2wd shortbox. thanks
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2011
Location: Phoenix, AZ
Posts: 91
|
Re: turbo 350 to 700r4
I believe that if your current TH350 has a 9 inch tailshaft, there will be no driveshaft mods needed at all. Only a 6 or 12 inch tail TH350 would need driveshaft mods.
|
![]() |
![]() |
![]() |
#3 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: turbo 350 to 700r4
Here ya go, read this page: http://transmissioncenter.net/700R4_Swap_Info.htm
Read this too: http://www.transmissioncenter.net/700r4.htm Add an external oil cooler if you don't have one installed now. |
![]() |
![]() |
![]() |
Bookmarks |
|
|