16" 6 lug Steel Wheel Hubcaps? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 08-26-2011, 10:22 AM

The 6 clip are older than the 3 clip and you'll notice a slight difference in the center section how their formed. These are the same as the wheels on my truck except I widened mine to 9.5". As for the caps there was a member on here who had four chrome 64-66 style that he bought for his truck and did not use.
http://67-72chevytrucks.com/vboard/s...d.php?t=391238
As you can see in the picture below there's an extra section on the back of the cap for the 16" wheel. The cap beside it is for the 3/4 or 1 ton wheels. They are thicker and the inner diameter is different than the 1/2 ton 16"

08-26-2011, 10:22 AM	#1
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 16" 6 lug Steel Wheel Hubcaps? The 6 clip are older than the 3 clip and you'll notice a slight difference in the center section how their formed. These are the same as the wheels on my truck except I widened mine to 9.5". As for the caps there was a member on here who had four chrome 64-66 style that he bought for his truck and did not use. http://67-72chevytrucks.com/vboard/s...d.php?t=391238 As you can see in the picture below there's an extra section on the back of the cap for the 16" wheel. The cap beside it is for the 3/4 or 1 ton wheels. They are thicker and the inner diameter is different than the 1/2 ton 16" __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 08-26-2011 at 11:21 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.