|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-06-2011, 03:01 PM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Shawnee, OK
Posts: 106
|
Re: 1967 C-10 LS POWERED Build
The bottom end is gonna stay stock for now. The cam I went with is from cam motion. Its a custom grind 240/248 Duration 612/595 Lift on a 110 LSA RPM range is 3500-6500. i purchased some 650 lift springs to go with the cam. I'm going to run a carb intake as seen about with the LSX controller and Dynatech Headers 1 7/8 in. Primaries with a 3 in. Collector. Behind all that is a 400 turbo.
|
|
|
|
09-06-2011, 09:38 PM
|
#2 | |
|
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Re: 1967 C-10 LS POWERED Build
Quote:
My guess is with those valve events and single plain intake, that motor is going to make peak power closer to 7k.
__________________
------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 |
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
