Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
09-10-2011, 04:06 PM | #1 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,871
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Thanks Dino!!
I loaded up the wood for the bed this morning on my trusty "work truck" and went to Lowe's to pick up some black stain. Got to the shop and sanded a couple places smooth on the back side of the strips and brushed some stain on. Let it sit, wiped it off as per the istructions, let it dry, and brushed some more on. Let it sit, wiped it off again, let it dry... three times. The wood is so dense that it isn't soaking up any of the stain so it isn't getting dark as dark as I want it. The grain of the wood isn't showing up like I thought it would either. Sanded smooth (or smooth enough to see if it was going to work): One coat of stain: Three coats of stain and a coat of Minwax rattle can satin polyurethane. I'm not too happy with the results of the test samples so I'll just paint the wood low gloss black like I did with the '65. On another note, I got all the welds cut loose on one of the wheel centers and now have to go get a big enough hammer to knock the center out (left mine at home.) I'll post pics once I get the center knocked out and flipped around, and take some backspacing measurements. Hopefully from the measurements yall can help me figure out if they'll fit or not.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc Last edited by theastronaut; 12-07-2012 at 02:06 PM. Reason: Fix dead pic links |
09-11-2011, 08:05 PM | #2 | |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
I think that you wood could have used a good sanding. that stuf looks like you dragged it down the pavement first behind your krauter. you can adj the depth of colour on most of those dyes ron |
|
09-11-2011, 09:14 PM | #3 |
Registered User
Join Date: Jul 2009
Location: sparks nv
Posts: 142
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
right but that was one who came to mind i later found more while doing a search on google for pressed wheel centers .
__________________
64 chevy c10 swb fleet small back window , in progress 454/400 swap , disc front disc rear , and just geting it on the road . 09 ford f350 cc swb 4x4 6.4l , to haul the others home . 2011 chevy hhr not mine but love the milage .. |
09-11-2011, 10:08 PM | #4 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,871
|
Re: Project Goldilocks, '66 C10 SWB BBW Build
Quote:
Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
Bookmarks |
|
|