1955-59 Gas/Accelerator Pedal Options ... I Need Photos!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Maximus · 09-09-2011, 11:03 PM

Hey guys, I tried some searches and couldn't find what I'm looking for.
In my old small window cab the previous owner removed the floor pivot that the stock accelerator pedal mounts to. Because of this I purchased and installed a Billet gas pedal and it works fine with my engine modification (400 Pontiac). My question, however, is I just swapped my cab with a large window cab and the original pedal pivot is unmolested. I was wondering if anyone had some photos of there stock pedal assembly installed so I can see if I can modify the stock linkage to operate with my quadrajet. ANY photos of the stock pedal assembly would be appreciated (In the cab AND/OR photos of the firewall linkage)

Thanks Alot guys!!

I thought before I rip the stock pivot out I would see if I could utilize it!

OrrieG · 09-10-2011, 12:23 AM

look at this. 59 w 62ish linkage and qjet.

http://67-72chevytrucks.com/vboard/s...&postcount=527

Coupeguy2001 · 09-10-2011, 06:02 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

09-09-2011, 11:03 PM	#1
Maximus Registered User Join Date: Feb 2011 Location: Santa Rosa, CA Posts: 672	1955-59 Gas/Accelerator Pedal Options ... I Need Photos!!! Hey guys, I tried some searches and couldn't find what I'm looking for. In my old small window cab the previous owner removed the floor pivot that the stock accelerator pedal mounts to. Because of this I purchased and installed a Billet gas pedal and it works fine with my engine modification (400 Pontiac). My question, however, is I just swapped my cab with a large window cab and the original pedal pivot is unmolested. I was wondering if anyone had some photos of there stock pedal assembly installed so I can see if I can modify the stock linkage to operate with my quadrajet. ANY photos of the stock pedal assembly would be appreciated (In the cab AND/OR photos of the firewall linkage) Thanks Alot guys!! I thought before I rip the stock pivot out I would see if I could utilize it! __________________ 1955 2nd Series 3100 - 400 Pontiac / BW Super T-10 4-Speed 1972 K5 Blazer 350 Auto 4x4 1928 Ford Model A Tudor

09-10-2011, 12:23 AM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: 1955-59 Gas/Accelerator Pedal Options ... I Need Photos!!! look at this. 59 w 62ish linkage and qjet. http://67-72chevytrucks.com/vboard/s...&postcount=527 __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

09-10-2011, 06:02 PM	#3
Coupeguy2001 Registered User Join Date: Aug 2011 Location: phoenix az Posts: 723	Re: 1955-59 Gas/Accelerator Pedal Options ... I Need Photos!!! Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.