CPP Drop Spindle Special

[Scottshotrods]

Originally Posted by MUNCH72

Could you pm me a price on a set of the new style drop spindles for a 72 shipped to 35630?

I was informed by a member this morning that on e-bay you get these dropped spindals for $225.00 and free shipping.

I am sorry we cannot sell them at this price and give free shipping

Justin

[Scottshotrods]

Originally Posted by Rusty69

Drop spindles for a 69? Has disc brakes up front. May be 71 spindles. Sent to 36092
Posted via Mobile Device

p/m sent

Justin

[70c10stepper]

Can you price a Grand Slam Kit 4/5 drop w/upgraded drilled & slotted rotors & red calipers for a 70 c10 stepside shipped to 38852?

Thanks

[68bowtie]

pm sent

[weircc]

How about camaro parts? 70 a arms black

[smallblocks350]

Can you PM me a price on CPP drop spindles for a 85 GMC C1500 to 72761?


Thank you

[C10agent]

Interested in Trac Bar (6572DTBK) and Shock Relocation (6372SRK) shipped to 77868. Thanks, Neil

[michael bustamante]

You selling 6 lug rotors too? Ship to 87121

[Twisted78SS]

Not sure if this was ever put to bed, (didn't read the entire thread again), but I just stumbled on this article which appears to show the amount of change in track width from a stock 72 disc brake truck with typical drop spindles to swapping those with the modular's.

Drop Spindle install

[lolife99]

This topic should be very easy to answer,... but no one seems to know.
There are 4 different track widths
1) Stock drum brake spindle
2) 71-87 factory disc brake spindle width
3) "standard" style 2.5" and 3" drop spindles
4) CPP Modular spindles

All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture.
No bags.
No different springs.
Same set up used for all measurements.
That would put all the rumors to rest.

[gringoloco]

Originally Posted by lolife99

This topic should be very easy to answer,... but no one seems to know.
There are 4 different track widths
1) Stock drum brake spindle
2) 71-87 factory disc brake spindle width
3) "standard" style 2.5" and 3" drop spindles
4) CPP Modular spindles

All would be measured from wheel mounting surface on the same truck, or on a fabricated fixture.
No bags.
No different springs.
Same set up used for all measurements.
That would put all the rumors to rest.

This would be easy enough if one had each of the spindles on hand. Have a stable fixture for the ball joint holes and a framing square to measure wms. Just a matter of rounding up the spindles; maybe a vendor could do this?

[lolife99]

Originally Posted by gringoloco

This would be easy enough if one had each of the spindles on hand. Have a stable fixture for the ball joint holes and a framing square to measure wms. Just a matter of rounding up the spindles; maybe a vendor could do this?

I 100% agree with you.

You would need:
1) 63-70 stock drum brake assembled spindle.
2) 71-72 stock disc brake assembly
(and maybe the 73-87 version to rule out any differences)
3) 63-70, 71-72, or 73-87 conventional DROP spindle
4) 63-70, 71-72, or 73-87 MODULAR drop spindle from CPP.
(both drop spindles would need to be measured with the same rotor installed)

Any vendors have the ability to do this?

[harleyhouser]

price for 72 c-10
4/6 drop
modular spindles
shock relocator/ rear
trac bar
drilled/slotted rotors&calipers
shipped to 74764

[LSChevJR]

Justin, I am looking for some 6-lug rotors for my 71 C-20. Can you send me a price? Shipped to Business address (77040).

Thanks, Justin

[lsjrl07]

Any luck on these rotors?

[bondo510]

Anyone know if the cpp 2 inch modular or regular 2 1/2 spindles will clear the early 60s apache 15 rims that are riveted together? I put 68 suspension in my 60. Thanks

[Spalma916]

Is Justin stll taking orders?
Posted via Mobile Device