need some wisdom, shes not running right. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ihatericeburners · 09-23-2011, 08:35 PM

I have got some problems. My daily driver is giving me some fits. I pulled the w/c belt off the pump to try to gain some h.p. and no she seems to run crappy when I get on her above 3ooo rpm. It's almost like its a lake of fuel. Ive never had this problem before, and just recently I installed a carb slavery. Would this be causing a lack of power?
Thanks for any help! Tony.
Posted via Mobile Device

PanelDeland · 09-23-2011, 09:46 PM

What's a w/c belt?

And a carb slavery?

Longhorn Man · 09-23-2011, 11:50 PM

A/C belt maybe?

sleepertruck72 · 09-24-2011, 02:28 AM

And a carb slavery?[/QUOTE]

X2

**special-K** · 09-24-2011, 06:33 AM

My guess is your secondaries aren't kicking in.

**special-K** · 09-25-2011, 09:08 AM

What carb do you have? Is it vacuum secondary.

**Boog** · 09-25-2011, 09:32 AM

I'm sorry but this sounds "foreign" to me...

litew8 · 09-25-2011, 10:57 AM

My guess is a typo w instead of a on the keyboard. No idea about the slavery thing. Maybe adjust your timing.

biggestjohn · 09-25-2011, 12:15 PM

Lake=lack

If he pulled the water pump belt, its probably detonating due to the lack of cooling the combustion chambers. Heat will build up there ungodly fast. Don't worry though, if he does this too much longer, his problem will become extreemly obvious, then he can replace the engine.

Does slavery=spacer?

He probably means A\C belt. The A is close to W on keyboard, and he was using a cell phone.

Check timing, read plugs to see if Air fuel ratio is correct. Also look for vacume leaks. Pulling an A\C belt shouldn't cause engine problems.

Lippyp · 09-25-2011, 12:46 PM

My translation from the predictive text nonsense (he posted from a mobile device and I have the same problem with my HTC, its turns even the simplest message into gibberish sometime) Lake is lack, w/c should be A/C god alone knows what a slavery is but I guarantee its nothing like the word he typed.

biggestjohn · 09-25-2011, 01:02 PM

slavery=spacer L is next to p on keyboard, v next to c, y is because he was boared

Simple english

**special-K** · 09-25-2011, 06:29 PM

Anyway,despite the obvious typos,I still seemed to gather what his problem was and gave my guess to what the problem was. Before the poor feller runs off from the criticism,does anyone else have a suggestion for him? If you have vacuum secondaries,such as with the Quadrajet that comes on these trucks,you may simply have a vacuum leak. Check that white canister on the passenger side of the carb to see if it's broken.

biggestjohn · 09-26-2011, 01:39 AM

Quote:

Originally Posted by special-K

Anyway,despite the obvious typos,I still seemed to gather what his problem was and gave my guess to what the problem was. Before the poor feller runs off from the criticism,does anyone else have a suggestion for him? If you have vacuum secondaries,such as with the Quadrajet that comes on these trucks,you may simply have a vacuum leak. Check that white canister on the passenger side of the carb to see if it's broken.

Criticism? Naw, more like solving a puzzle. Made the morning kinda interesting.

BTW: Board=bored

oops

**70cst** · 09-26-2011, 11:31 AM

ihatericeburners posted on a mobile device...when I am on the run and I try posting on my cell...my text looks the same. Interesting issue. I'm signed on

treveiger · 09-26-2011, 12:14 PM

On now to
Posted via Mobile Device

dukcaln · 09-26-2011, 12:18 PM

whats the story, get it running,, I would suggest the belt go back on and check for vacuum leaks....

*RUSHNBOBO* · 09-26-2011, 04:03 PM

Just wrote to "ihatericeburners" on his profile page, and said there was about ten guys willing to help out, but we need more info. Hopefully we get him back on the thread.

dukcaln · 09-26-2011, 04:07 PM

me too........ hope he comes back for an update

**special-K** · 09-26-2011, 06:23 PM

I'b wumbering toob.

posted via mobile device

biggestjohn · 09-27-2011, 01:29 AM

Quote:

Originally Posted by biggestjohn

Criticism? Naw, more like solving a puzzle. Made the morning kinda interesting.

BTW: Board=bored

oops

boared=bored

Thats bad when you misspell the word that you misspelled

duh

*RUSHNBOBO* · 09-27-2011, 02:10 AM

Quote:

Originally Posted by biggestjohn

Don't worry though, if he does this too much longer, his problem will become extreemly obvious, then he can replace the engine.

Wasn't going to say anything but since you brought it up I noticed you have an interesting way to spell "extreemly"........and you weren't even using a cell.

extreemly: to be even more extreeme than "extremely" ?....maybeey

biggestjohn : I shouldnt talk because............if it went fur spael chec id miissspel evary othar werd ...........Rush

litew8 · 09-27-2011, 02:42 AM

Where is the op? I want to see who is right!

treveiger · 09-27-2011, 11:06 AM

come on guys we've got some truck geniuses on here we should have this licked by now

.

I have auto correct on my phone so there's times I've cussed at this thing quite a bit

.
Posted via Mobile Device

biggestjohn · 09-27-2011, 11:16 AM

Quote:

Originally Posted by RUSHNBOBO

Wasn't going to say anything but since you brought it up I noticed you have an interesting way to spell "extreemly"........and you weren't even using a cell.

extreemly: to be even more extreeme than "extremely" ?....maybeey

biggestjohn : I shouldnt talk because............if it went fur spael chec id miissspel evary othar werd ...........Rush

Contagious isn't it?! Maybe I was trying to accentuate the feeling.

OK, so I'm not buying that excuse either. I claim extreeeeeeeeeme confusion.

Come on Ihatericeburners, the suspense is killing us.

ihatericeburners · 10-09-2011, 12:16 PM

Sorry for the confusion. I did post from my HTC phone. It's nice being able to wrench around a lil bit in the garage and have the internet as close to you as a wrench! soooo, I have the goodwrench Crate 350 with edelbrock carb. I had a carb spacer and removed it. Now its not running like it used to 6 months ago before the spacer at higher rpms. I haves adjusted the timming, jetting, and I went ahead and left the water pump belt on for now.
Sorry about the late response, ts been busy at work. And now I have some time to play around. Thanks for the replies!
Posted via Mobile Device

09-23-2011, 08:35 PM	#1
ihatericeburners Registered User Join Date: Nov 2008 Location: new port richey, fl Posts: 118	need some wisdom, shes not running right. I have got some problems. My daily driver is giving me some fits. I pulled the w/c belt off the pump to try to gain some h.p. and no she seems to run crappy when I get on her above 3ooo rpm. It's almost like its a lake of fuel. Ive never had this problem before, and just recently I installed a carb slavery. Would this be causing a lack of power? Thanks for any help! Tony. Posted via Mobile Device Last edited by 70cst; 09-26-2011 at 11:29 AM.

09-23-2011, 09:46 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: need some wisdom, shes not running right. What's a w/c belt? And a carb slavery? __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-23-2011, 11:50 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: need some wisdom, shes not running right. A/C belt maybe?

09-24-2011, 02:28 AM	#4
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: need some wisdom, shes not running right. And a carb slavery?[/QUOTE] X2 __________________ 72 C20 Longbed 05 1500 Z71

09-24-2011, 06:33 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: need some wisdom, shes not running right. My guess is your secondaries aren't kicking in. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-25-2011, 09:08 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: need some wisdom, shes not running right. What carb do you have? Is it vacuum secondary. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-25-2011, 09:32 AM	#7
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: need some wisdom, shes not running right. I'm sorry but this sounds "foreign" to me... __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

09-25-2011, 10:57 AM	#8
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: need some wisdom, shes not running right. My guess is a typo w instead of a on the keyboard. No idea about the slavery thing. Maybe adjust your timing. __________________ project: "my happy mess"

09-25-2011, 12:15 PM	#9
biggestjohn Registered User Join Date: Apr 2010 Location: Russiaville Posts: 203	Re: need some wisdom, shes not running right. Lake=lack If he pulled the water pump belt, its probably detonating due to the lack of cooling the combustion chambers. Heat will build up there ungodly fast. Don't worry though, if he does this too much longer, his problem will become extreemly obvious, then he can replace the engine. Does slavery=spacer? He probably means A\C belt. The A is close to W on keyboard, and he was using a cell phone. Check timing, read plugs to see if Air fuel ratio is correct. Also look for vacume leaks. Pulling an A\C belt shouldn't cause engine problems. Last edited by biggestjohn; 09-25-2011 at 12:42 PM. Reason: ac

09-25-2011, 12:46 PM	#10
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: need some wisdom, shes not running right. My translation from the predictive text nonsense (he posted from a mobile device and I have the same problem with my HTC, its turns even the simplest message into gibberish sometime) Lake is lack, w/c should be A/C god alone knows what a slavery is but I guarantee its nothing like the word he typed. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

09-25-2011, 01:02 PM	#11
biggestjohn Registered User Join Date: Apr 2010 Location: Russiaville Posts: 203	Re: need some wisdom, shes not running right. slavery=spacer L is next to p on keyboard, v next to c, y is because he was boared Simple english

09-25-2011, 06:29 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: need some wisdom, shes not running right. Anyway,despite the obvious typos,I still seemed to gather what his problem was and gave my guess to what the problem was. Before the poor feller runs off from the criticism,does anyone else have a suggestion for him? If you have vacuum secondaries,such as with the Quadrajet that comes on these trucks,you may simply have a vacuum leak. Check that white canister on the passenger side of the carb to see if it's broken. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-26-2011, 11:31 AM	#14
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: need some wisdom, shes not running right. ihatericeburners posted on a mobile device...when I am on the run and I try posting on my cell...my text looks the same. Interesting issue. I'm signed on __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-26-2011, 12:14 PM	#15
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: need some wisdom, shes not running right. On now to Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

09-26-2011, 12:18 PM	#16
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: need some wisdom, shes not running right. whats the story, get it running,, I would suggest the belt go back on and check for vacuum leaks.... __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10



Register or Log In To remove these advertisements.

09-26-2011, 04:03 PM	#17
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: need some wisdom, shes not running right. Just wrote to "ihatericeburners" on his profile page, and said there was about ten guys willing to help out, but we need more info. Hopefully we get him back on the thread.

09-26-2011, 04:07 PM	#18
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: need some wisdom, shes not running right. me too........ hope he comes back for an update __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

09-26-2011, 06:23 PM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: need some wisdom, shes not running right. I'b wumbering toob. posted via mobile device __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-27-2011, 02:42 AM	#22
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: need some wisdom, shes not running right. Where is the op? I want to see who is right! __________________ project: "my happy mess"

09-27-2011, 11:06 AM	#23
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: need some wisdom, shes not running right. come on guys we've got some truck geniuses on here we should have this licked by now. I have auto correct on my phone so there's times I've cussed at this thing quite a bit. Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

10-09-2011, 12:16 PM	#25
ihatericeburners Registered User Join Date: Nov 2008 Location: new port richey, fl Posts: 118	Re: need some wisdom, shes not running right. Sorry for the confusion. I did post from my HTC phone. It's nice being able to wrench around a lil bit in the garage and have the internet as close to you as a wrench! soooo, I have the goodwrench Crate 350 with edelbrock carb. I had a carb spacer and removed it. Now its not running like it used to 6 months ago before the spacer at higher rpms. I haves adjusted the timming, jetting, and I went ahead and left the water pump belt on for now. Sorry about the late response, ts been busy at work. And now I have some time to play around. Thanks for the replies! Posted via Mobile Device

Register or Log In To remove these advertisements.