CA rust free cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikewarme · 09-25-2011, 01:43 PM

I have a clean cab . Was a big block truck with a/c. Has holes for factory headliner and tabs for rear cab molding. Someone put holes in kick panels for speakers. Uncut dash at radio.

$400 or trade for 67/68 chevy truck cab!

Burbank Ca

1cool69 · 09-25-2011, 09:59 PM

Any pics?
Im looking for a clean cab, and im not to far from you.thanks

mikewarme · 09-25-2011, 11:18 PM

The cab is buried for the most part in the garage. Going to be 2 weeks till i get to it. I can promise you it has no rust in the floor, supports, rockers, cab corners, firewall etc. Only thing I can't see is the hinge pillar area as they rust inside out always.

1cool69 · 09-26-2011, 10:20 PM

What year is the cab? Also, is it just the bare cab?thanks

mikewarme · 09-26-2011, 11:00 PM

69 year . Yes it is bare.
Posted via Mobile Device

mikewarme · 09-28-2011, 11:27 PM

found these photos in my hard drive. 5 years ago and since than it has been in my gaRAGE and is completely bare as far as parts bolted on

mikewarme · 09-28-2011, 11:29 PM

No pin holes anywhere on this cab that I could find! and im picky! And the reason im selling is because the frame I have is a 67 and I want to find a 67 cab. So I would even consider a trade.

mikewarme · 10-03-2011, 11:27 AM

Anybody?
Posted via Mobile Device

68Mike · 10-03-2011, 12:01 PM

Great price...I just wish I had the room!
Posted via Mobile Device

**72k5zl1** · 10-03-2011, 12:16 PM

if i were closer i would take it. anybody headed east?

**67cheby** · 10-03-2011, 02:59 PM

holy smokes this is a steal , why hasnt anyone bought this ??

no moa · 10-03-2011, 03:05 PM

Quote:

Originally Posted by 72k5zl1

if i were closer i would take it. anybody headed east?

I was thinking the same thing!

maybe all us New England guys need to get together, find a long distance trucker and send him out to get us some cabs.

BHyatt · 10-03-2011, 10:05 PM

How much does a cab weigh? Can you Pm me a zip code?

Vintage Windmills · 10-03-2011, 10:12 PM

Quote:

Originally Posted by mikewarme

Anybody?
Posted via Mobile Device

Do you have any trips planned up to the bay area or further north? I have a friend up there.

67-72trucks · 10-03-2011, 10:47 PM

nice cab

spatz · 10-05-2011, 12:23 AM

clear title or no title on the cab?

mahanian · 10-05-2011, 02:21 AM

I have a 67 small window cab with 67 doors and 67 vent windows, but it needs rust repair. Are you only looking for a rust free 67 cab or open to others?

BHyatt · 10-05-2011, 06:50 PM

I would like to know how much it weighs so that I could do some research on shipping. This is exactly what I need.

spatz · 10-05-2011, 07:02 PM

I am also interested in the cab

Ram-Man · 10-16-2011, 05:23 PM

Pending the pics this may be mine

mikewarme · 10-16-2011, 08:15 PM

Email is Mikewarme@yahoo.com sorry guys for not responding i wasnt getting email notifications! I don't have a way of weighing this so ram-man my idea is u-ship.com. It will have to be lift gated I don't have a lift gate or a ton of help to load it. More than likely I will have to build a pallet for this as a regular pallet will not suffice!

bigrigpardo · 10-17-2011, 09:45 PM

does it have original rockers. has it had any repairs before?

69C10@16 · 10-18-2011, 11:36 PM

Ive got a 67 Big Window cab no title. If you'd be interested in a trade plus some cash I can get you some pictures.

sheldon · 11-01-2011, 05:48 PM

Holy cow!!! This is perfect. I'm emailing you also, but I'm working on getting the trip together!
Posted via Mobile Device

**master 1969 c10** · 11-01-2011, 08:13 PM

the cab weight is around 600lbs I had one ship from scottsdale ,az to columbus,oh using ups freight at work we ship alot with ups with our discount i payed like $530. dollars my buddys in az did build a oversize palet to ship it on

09-25-2011, 01:43 PM	#1
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	rust free cab I have a clean cab . Was a big block truck with a/c. Has holes for factory headliner and tabs for rear cab molding. Someone put holes in kick panels for speakers. Uncut dash at radio. $400 or trade for 67/68 chevy truck cab! Burbank Ca

09-25-2011, 09:59 PM	#2
1cool69 Registered User Join Date: Aug 2011 Location: San Fernando Valley, California Posts: 24	Re: rust free cab Any pics? Im looking for a clean cab, and im not to far from you.thanks

09-25-2011, 11:18 PM	#3
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab The cab is buried for the most part in the garage. Going to be 2 weeks till i get to it. I can promise you it has no rust in the floor, supports, rockers, cab corners, firewall etc. Only thing I can't see is the hinge pillar area as they rust inside out always.

09-26-2011, 10:20 PM	#4
1cool69 Registered User Join Date: Aug 2011 Location: San Fernando Valley, California Posts: 24	Re: rust free cab What year is the cab? Also, is it just the bare cab?thanks

09-26-2011, 11:00 PM	#5
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab 69 year . Yes it is bare. Posted via Mobile Device

09-28-2011, 11:27 PM	#6
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab found these photos in my hard drive. 5 years ago and since than it has been in my gaRAGE and is completely bare as far as parts bolted on Attached Images

09-28-2011, 11:29 PM	#7
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab No pin holes anywhere on this cab that I could find! and im picky! And the reason im selling is because the frame I have is a 67 and I want to find a 67 cab. So I would even consider a trade.

10-03-2011, 11:27 AM	#8
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab Anybody? Posted via Mobile Device

10-03-2011, 12:01 PM	#9
68Mike Registered User Join Date: Jan 2007 Location: Salinas,Ca 93906 Posts: 502	Re: rust free cab Great price...I just wish I had the room! Posted via Mobile Device __________________ Mike Currents: '74 Cheyenne Super C30 Camper Special 3+3 aka "Sucia30" Past: '79 C10 BIG 10 (Sold) 69 CST LWB - Always a "Work in progress" true work truck (stolen) 05 GSXR 750 it has a pretty paint job _wrecked 72 SWB full frame restoration -sold! 71 CST K5 Blazer 4x4 (soon to be 2wd)-project - sold! C10 Club 2012 Brothers Show Video http://youtu.be/pUeV2vP7Wpo

10-03-2011, 12:16 PM	#10
72k5zl1 Senior Member Join Date: Feb 2010 Location: bennington, vt Posts: 1,626	Re: rust free cab if i were closer i would take it. anybody headed east? __________________ website https://www.villagegarage.com/ truck guy in the whiskey world https://www.instagram.com/c10glen/?hl=en https://www.hemmings.com/stories/car...e-perfect-day/

10-03-2011, 02:59 PM	#11
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: rust free cab holy smokes this is a steal , why hasnt anyone bought this ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2011, 10:05 PM	#13
BHyatt Registered User Join Date: Jul 2007 Location: New Castle, IN Posts: 199	Re: rust free cab How much does a cab weigh? Can you Pm me a zip code?

10-03-2011, 10:47 PM	#15
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: rust free cab nice cab

10-05-2011, 12:23 AM	#16
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: rust free cab clear title or no title on the cab?

10-05-2011, 02:21 AM	#17
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: rust free cab I have a 67 small window cab with 67 doors and 67 vent windows, but it needs rust repair. Are you only looking for a rust free 67 cab or open to others? __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS



Register or Log In To remove these advertisements.

10-05-2011, 06:50 PM	#18
BHyatt Registered User Join Date: Jul 2007 Location: New Castle, IN Posts: 199	Re: rust free cab I would like to know how much it weighs so that I could do some research on shipping. This is exactly what I need.

10-05-2011, 07:02 PM	#19
spatz Registered User Join Date: Mar 2009 Location: Flint, Mi Posts: 200	Re: rust free cab I am also interested in the cab

10-16-2011, 05:23 PM	#20
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: rust free cab Pending the pics this may be mine __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

10-16-2011, 08:15 PM	#21
mikewarme Registered User Join Date: Oct 2009 Location: Burbank,California Posts: 285	Re: rust free cab Email is Mikewarme@yahoo.com sorry guys for not responding i wasnt getting email notifications! I don't have a way of weighing this so ram-man my idea is u-ship.com. It will have to be lift gated I don't have a lift gate or a ton of help to load it. More than likely I will have to build a pallet for this as a regular pallet will not suffice!

10-17-2011, 09:45 PM	#22
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: rust free cab does it have original rockers. has it had any repairs before?

10-18-2011, 11:36 PM	#23
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Re: rust free cab Ive got a 67 Big Window cab no title. If you'd be interested in a trade plus some cash I can get you some pictures.

11-01-2011, 05:48 PM	#24
sheldon Registered User Join Date: Oct 2010 Location: College station TX/ soon to be Austin Posts: 51	Re: rust free cab Holy cow!!! This is perfect. I'm emailing you also, but I'm working on getting the trip together! Posted via Mobile Device __________________ Half of all people are below average, where do you fall in?

11-01-2011, 08:13 PM	#25
master 1969 c10 Active Member Join Date: Oct 2009 Location: Columbus Ohio Posts: 157	Re: rust free cab the cab weight is around 600lbs I had one ship from scottsdale ,az to columbus,oh using ups freight at work we ship alot with ups with our discount i payed like $530. dollars my buddys in az did build a oversize palet to ship it on

Register or Log In To remove these advertisements.