|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-02-2011, 10:39 PM
|
#1 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: #1 #2 #3 low compression in L6 250
Best way to tell is to set the cylinder with both valves closed and connect compressed air to the spark plug hole. The listen for the air out the exhaust or crankcase.
Another method is to repeat the test with a small squirt of gear oil in the cylinder. That will usually seal the rings enough to raise the pressure if rings are the problem.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
| Bookmarks |
| Tags |
| 250, 292, compression, cylinder, inline |
|
|
Hybrid Mode
