Jack Decal Project For My Green '67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 10-01-2011, 02:28 PM

I have been working on this for weeks in Photoshop and finally printed out a nice enough one to put in the truck. I was lucky that one of my trucks had the decal in the glove box and it was in decent shape to start with. It still had problems with small pieces missing, creases, and missing printed areas. I re-constructed it piece by piece in Photoshop until I had a complete decal. After I printed the first one out I discovered I still had a couple of problem areas so back to the drawing board... The final one looked really good so I mounted it on a double sided adhesive sheet and put it in the truck. I think the '68 trucks used the same decal, I know the ones with Buddy Buckets did anyway. The first pic is what the original looked like, the second is the re-constructed one, and third, installed in the truck. I didn't keep track of the hours in doing this but it was a lot...

LockDoc

GASoline71 · 10-01-2011, 03:24 PM

Nice! Great detail!

Gary

nds1968 · 10-01-2011, 05:08 PM

Looks nice

Since you have a lot of time invested would you consider selling me one

Thanks, Nate

**LockDoc** · 10-01-2011, 05:24 PM

Quote:

Originally Posted by nds1968

Looks nice

Since you have a lot of time invested would you consider selling me one

Thanks, Nate

Hi Nate,

If I can get the adhesive backing figured out and the best way to ship them I will probably put a few on the parts board. If you want to PM me so I can remember to send you a message, I will put you on a first chance list when I get to that point.

Thanks.
LockDoc

OhOneWS6 · 10-01-2011, 05:25 PM

Nice job. $3.95 from LMC part number 38-0190. The one from LMC looks like there may be a little more to it. Perhaps rear jack placement.

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=52

nds1968 · 10-01-2011, 05:29 PM

Quote:

Originally Posted by LockDoc

Hi Nate,

If I can get the adhesive backing figured out and the best way to ship them I will probably put a few on the parts board. If you want to PM me so I can remember to send you a message, I will put you on a first chance list when I get to that point.

Thanks.
LockDoc

OK Thanks

As an idea if your happy with how they look maybe get a price on getting them printed in vinyl. Nate

**LockDoc** · 10-01-2011, 05:30 PM

Quote:

Originally Posted by OhOneWS6

Nice job. $3.95 from LMC part number 38-0190

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=52

Not quite. That is the '69-72 style. '67-'68 are different and are not reproduced.

LockDoc

OhOneWS6 · 10-01-2011, 05:44 PM

Ah. Gotcha.

BMERDOC · 10-01-2011, 05:54 PM

Its amazing what technology has done for us just in the last 15-20 years! Something as simple as you being able to sit at home and make a resto sticker amazes me. Great job!

70-Shorty · 10-01-2011, 05:59 PM

the hot ticket would be to have them digitally printed on vinyl with a overlaminate, they would last many many years that way, probably not too expensive if he already has the PSD artwork done.
Tim

bobs409 · 10-01-2011, 07:50 PM

Quote:

Originally Posted by BMERDOC

Its amazing what technology has done for us just in the last 15-20 years! Something as simple as you being able to sit at home and make a resto sticker amazes me. Great job!

Just don't do it with $100 dollar bills.

**70cst** · 10-01-2011, 08:00 PM

Nice work ...

**LockDoc** · 10-01-2011, 09:01 PM

-
Thanks guys. I actually enjoyed doing it. My wife would walk into the office and say: "Are you STILL working on that???" and I would say "yep"..

I may check on the vinyl. I have a couple of shops close to me.

LockDoc

**PGSigns** · 10-01-2011, 09:11 PM

If the local guys don't want to fool with it let me know will help out if I can. Can thermal print them on vinyl.
Jimmy

**LockDoc** · 10-01-2011, 09:46 PM

Quote:

Originally Posted by PGSigns

If the local guys don't want to fool with it let me know will help out if I can. Can thermal print them on vinyl.
Jimmy

Thanks Jimmy. I will keep that in mind.

LockDoc

1972RedNeck · 10-01-2011, 09:58 PM

[QUOTE=LockDoc;4929969]'67-'68 are different and are not reproduced./QUOTE]

They are now.

**LockDoc** · 10-05-2011, 11:02 AM

-
I wanted to update this thread with a picture of where the jack instruction decal is on my unmolested '68 CST with buddy buckets. This is on the seat riser on the passengers side. It also has no bowties

LockDoc

stllookn · 10-05-2011, 09:58 PM

Looks good to me...how much?

10-01-2011, 02:28 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Jack Decal Project For My Green '67 I have been working on this for weeks in Photoshop and finally printed out a nice enough one to put in the truck. I was lucky that one of my trucks had the decal in the glove box and it was in decent shape to start with. It still had problems with small pieces missing, creases, and missing printed areas. I re-constructed it piece by piece in Photoshop until I had a complete decal. After I printed the first one out I discovered I still had a couple of problem areas so back to the drawing board... The final one looked really good so I mounted it on a double sided adhesive sheet and put it in the truck. I think the '68 trucks used the same decal, I know the ones with Buddy Buckets did anyway. The first pic is what the original looked like, the second is the re-constructed one, and third, installed in the truck. I didn't keep track of the hours in doing this but it was a lot... LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-01-2011, 05:08 PM	#3
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Jack Decal Project For My Green '67 Looks nice Since you have a lot of time invested would you consider selling me one Thanks, Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

10-01-2011, 05:25 PM	#5
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Jack Decal Project For My Green '67 Nice job. $3.95 from LMC part number 38-0190. The one from LMC looks like there may be a little more to it. Perhaps rear jack placement. http://www.lmctruck.com/icatalog/cb/full.aspx?Page=52 __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400

10-01-2011, 05:44 PM	#8
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Jack Decal Project For My Green '67 Ah. Gotcha. __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400

10-01-2011, 05:54 PM	#9
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: Jack Decal Project For My Green '67 Its amazing what technology has done for us just in the last 15-20 years! Something as simple as you being able to sit at home and make a resto sticker amazes me. Great job! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

10-01-2011, 05:59 PM	#10
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: Jack Decal Project For My Green '67 the hot ticket would be to have them digitally printed on vinyl with a overlaminate, they would last many many years that way, probably not too expensive if he already has the PSD artwork done. Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

10-01-2011, 08:00 PM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Jack Decal Project For My Green '67 Nice work ... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-01-2011, 09:01 PM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Re: Jack Decal Project For My Green '67 - Thanks guys. I actually enjoyed doing it. My wife would walk into the office and say: "Are you STILL working on that???" and I would say "yep".. I may check on the vinyl. I have a couple of shops close to me. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-01-2011, 09:11 PM	#14
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Jack Decal Project For My Green '67 If the local guys don't want to fool with it let me know will help out if I can. Can thermal print them on vinyl. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

10-05-2011, 11:02 AM	#17
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Re: Jack Decal Project For My Green '67 - I wanted to update this thread with a picture of where the jack instruction decal is on my unmolested '68 CST with buddy buckets. This is on the seat riser on the passengers side. It also has no bowties LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 02-19-2012 at 11:08 PM.

10-05-2011, 09:58 PM	#18
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Jack Decal Project For My Green '67 Looks good to me...how much? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.