Boxing a 47-53 1/2-Tips, Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

El Campo · 10-17-2011, 09:09 PM

O yea by the way I Don't know how you are doing it but worked really well for me was clamping my 3/16 by 6 inch sheets of flat to the rail and then just running a torch along the top of frame rail to cut it to size perfectly. Then hit it once with a grinder to clean all slag off and then put a little bevel on the plate and the frame rail and welds go on BEAUTIFUL! If you use your head which i am sure you are

on the straight sections of frame you only have to cut one side of the plate. I think total weight added was no more than about 30 or so pounds.
Posted via Mobile Device

10-17-2011, 09:09 PM	#1
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Boxing a 47-53 1/2-Tips, Parts O yea by the way I Don't know how you are doing it but worked really well for me was clamping my 3/16 by 6 inch sheets of flat to the rail and then just running a torch along the top of frame rail to cut it to size perfectly. Then hit it once with a grinder to clean all slag off and then put a little bevel on the plate and the frame rail and welds go on BEAUTIFUL! If you use your head which i am sure you are on the straight sections of frame you only have to cut one side of the plate. I think total weight added was no more than about 30 or so pounds. Posted via Mobile Device __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.