pics of 3/5 & 4/6 drops - The 1947 - Present Chevrolet & GMC Truck Message Board Network

misslemanid · 08-08-2011, 11:52 AM

Ok.... So as you can see in the other thread I posted, I was considering dropping my 78 3 in the front and 5 in the rear. However, I have a lot of people trying to convince me to do a 4/6 drop. I was wondering if you guys here could help me out with some photos of your 3/5 and 4/6 drops so I could see them side by side so to speak. Also, do you always need to notch the frame if you do a 6" rear drop. Please help me out here and thanks in advance.
Posted via Mobile Device

monte0185 · 08-08-2011, 12:19 PM

Quote:

Originally Posted by misslemanid

Ok.... So as you can see in the other thread I posted, I was considering dropping my 78 3 in the front and 5 in the rear. However, I have a lot of people trying to convince me to do a 4/6 drop. I was wondering if you guys here could help me out with some photos of your 3/5 and 4/6 drops so I could see them side by side so to speak. Also, do you always need to notch the frame if you do a 6" rear drop. Please help me out here and thanks in advance.
Posted via Mobile Device

Mine is a 3-5 but im going to put a set of 2" springs in front to make it a 5/5. If it ever comes back from paint that is.

bbbc10 · 08-08-2011, 12:51 PM

my 5/6

Malo83 · 08-08-2011, 02:19 PM

4/5 drop with 2 cut coils and flip kit

Uploaded with ImageShack.us

camshaftgsxr · 08-08-2011, 02:34 PM

what size tires malo???

franky69c10 · 08-08-2011, 03:33 PM

Quote:

Originally Posted by Malo83

4/5 drop with 2 cut coils and flip kit

Uploaded with ImageShack.us

Nice drop and nice front plate GO RAIDERS
Posted via Mobile Device

franky69c10 · 08-08-2011, 03:41 PM

Quote:

Originally Posted by bbbc10

my 5/6

Anymore info on your drop

Posted via Mobile Device

misslemanid · 08-08-2011, 03:48 PM

Quote:

Originally Posted by Malo83

4/5 drop with 2 cut coils and flip kit

Uploaded with ImageShack.us

Malo, did you use drop spindles or just cut the front coils and remove the bump stop? How's the ride quality?
Posted via Mobile Device

1tonchevy · 08-08-2011, 04:31 PM

mine 5/4

Malo83 · 08-09-2011, 01:37 AM

Quote:

Originally Posted by misslemanid

Malo, did you use drop spindles or just cut the front coils and remove the bump stop? How's the ride quality?
Posted via Mobile Device

Front has 2 cut coils and bump stops removed, ride is quite good with this setup, also has an alignment kit to bring everything back into specs, tire and wheels are 15x9 rims and 275/50 TA's

misslemanid · 08-09-2011, 02:58 AM

Quote:

Originally Posted by Malo83

Front has 2 cut coils and bump stops removed, ride is quite good with this setup, also has an alignment kit to bring everything back into specs, tire and wheels are 15x9 rims and 275/50 TA's

Where would I get an alignment kit?
Posted via Mobile Device

bbbc10 · 08-09-2011, 05:43 AM

western chassis 2.5" spindles and 2.5" springs for rear belltech 6" flip kit an cnotch

Malo83 · 08-09-2011, 01:02 PM

Quote:

Originally Posted by misslemanid

Where would I get an alignment kit?
Posted via Mobile Device

Don't think you could get one, my kit was locally made and it consists of a
1/2" thick spacer and longer A arm bolts, you can see the spacer right behind the shims

Uploaded with ImageShack.us

BamaDave · 10-21-2011, 07:47 PM

bump for the question about notching frame for a flip. Does a notch have to be done for a 6" flip? Also, where, who sells a short bump stop for the front and rear of my 86. What brand?

bbbc10 · 10-21-2011, 09:00 PM

yea u need to notch it wth 6"......anthe rear flip kit an notch comes wth bump stops......cnt help u wth front bump stops

tidos76 · 10-21-2011, 09:30 PM

3/5 no notch. flip kit and spindles. cut the bump stops about half way down.
the 20"s rub just a lil in the rear when im turning. on a incline

muthstryker · 10-21-2011, 10:00 PM

You can get away with a 7" drop out back with out a notch, just have to take off your factory bump stop mount and dont plan on hauling anything.

ProStreet83C10 · 10-21-2011, 10:36 PM

McGaughys 4.5"/6" drop,

J Knight · 10-21-2011, 10:58 PM

4.5/5

08-08-2011, 11:52 AM	#1
misslemanid Registered User Join Date: Aug 2011 Location: Hayden, ID Posts: 48	pics of 3/5 & 4/6 drops Ok.... So as you can see in the other thread I posted, I was considering dropping my 78 3 in the front and 5 in the rear. However, I have a lot of people trying to convince me to do a 4/6 drop. I was wondering if you guys here could help me out with some photos of your 3/5 and 4/6 drops so I could see them side by side so to speak. Also, do you always need to notch the frame if you do a 6" rear drop. Please help me out here and thanks in advance. Posted via Mobile Device

08-08-2011, 12:51 PM	#3
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: pics of 3/5 & 4/6 drops my 5/6 Attached Images

08-08-2011, 02:19 PM	#4
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: pics of 3/5 & 4/6 drops 4/5 drop with 2 cut coils and flip kit Uploaded with ImageShack.us

08-08-2011, 02:34 PM	#5
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: pics of 3/5 & 4/6 drops what size tires malo??? __________________

08-08-2011, 04:31 PM	#9
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	Re: pics of 3/5 & 4/6 drops mine 5/4 __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892

08-09-2011, 05:43 AM	#12
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: pics of 3/5 & 4/6 drops western chassis 2.5" spindles and 2.5" springs for rear belltech 6" flip kit an cnotch

10-21-2011, 07:47 PM	#14
BamaDave Registered User Join Date: May 2010 Location: Shoals, AL Posts: 299	Re: pics of 3/5 & 4/6 drops bump for the question about notching frame for a flip. Does a notch have to be done for a 6" flip? Also, where, who sells a short bump stop for the front and rear of my 86. What brand? Last edited by BamaDave; 10-21-2011 at 07:57 PM.

10-21-2011, 09:00 PM	#15
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: pics of 3/5 & 4/6 drops yea u need to notch it wth 6"......anthe rear flip kit an notch comes wth bump stops......cnt help u wth front bump stops

10-21-2011, 09:30 PM	#16
tidos76 Registered User Join Date: Sep 2011 Location: oklahoma city Posts: 33	Re: pics of 3/5 & 4/6 drops 3/5 no notch. flip kit and spindles. cut the bump stops about half way down. the 20"s rub just a lil in the rear when im turning. on a incline

10-21-2011, 10:00 PM	#17
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: pics of 3/5 & 4/6 drops You can get away with a 7" drop out back with out a notch, just have to take off your factory bump stop mount and dont plan on hauling anything.

10-21-2011, 10:36 PM	#18
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: pics of 3/5 & 4/6 drops McGaughys 4.5"/6" drop, __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

10-21-2011, 10:58 PM	#19
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: pics of 3/5 & 4/6 drops 4.5/5 Attached Images __________________ John 82 Chevy Silverado 350ci/TH350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.