s10 v8

[hipasschev94]

heres my project for today. im fixing the triniun instead of buying a new one and saving me 10 bucks lol. sweet all the things you can do with a little peice of scrap metal you find on the floor

[hipasschev94]

alright im done with the trunnion, worked on a couple odd and end then decided i was bored enough that i was going to work on my girlfriends side alittle bit lol sorry babe got the sanded down alittle bit cut out then was trying to get the wire mesh in but that isnt working so well so im thinkin i just might spend another week working on welding up sheet metal on that.. all in all id say its goin pretty smooth

[hipasschev94]

i finally got the F$@!& wiper arms off!! haha i win this round XD got the cowl off and the outer fenders going to save 70 and repair my inner wheel wells and debating about repairing my better fender which will be some work but save me 50 ill post pics sometime soon

[hipasschev94]

here was my progress from yesterday, finally got the wiper arms off then took off the cowl and the outer fenders then found out someone hit my hood right on the ridge.. luckally it was in a part that i will be able to fix it very easily

[hipasschev94]

then heres the depressing day for me and the truck.. i took off the inner wheel wells just to find the bottom of my firewall including the lower mount for the inner wheel well and my dad is saying ill probably have to buy a new cab which i cant afford because it has to be a tahoe cab, and i wouldnt be able to fix the lower fire wall, does any one have any tips? im on a extreamly low budget and wouldnt be able to afford a new cab... that last pic is my driver side rocker, floor board and lower fire wall

[hipasschev94]

or ive been researching this for awhile, how much of a pain in the @s$ would it be to remover all the wireing make my own firewall then re-wire the whole cab? im open to all options for this at this point...