LA ** Good Part; Time of Clean-up*** - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dnd1978 · 01-08-2012, 08:51 PM

Guys its time to clean out the gargae. All parts are plus shipping

I take paypal: dnd1978@yahoo.com
______________________________________________________

Hood- in great shape - $225

KYB Rear Shocks; work great some over spray -$45

KYB Fr Shocks; work graet some over spray-$45

13 gallon gas tank with mount brackets - $55

Complete steering linkage; works great no play - $100

STEERING SHAFT with rag joint -$20

Tinted sliding back glass good shape- $65

Early Classic Ent Hidden Receiver Hitch -$100

License Plate Flip Frame-$20

67-87 Rear Bumper - Stepside - Chrome with brackets-$125

upper control arms no ball joint - $50

lower control arms with ball joints - $70

Bag plates - $25

Holley750 CFM Four Barrel Carburetor blower carb - $250
PART #: 0-80576SThese Carburetors that are intended for use with superchargers, and have a unique capability that allows their power Valves to reference the intake Manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake Manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Without this external referencing, the power valve would be "reading" the Supercharger boost pressure, which has no bearing on the engine load.
http://www.holley.com/0-80576S.asp

2, 2.5' Flowmaster mufflers 40 s Offset inlet / sentered offlet 2year old - $75 - SOLD

like new brake booster with bracket $65- SOLD

94 astor van hydro brake booster - $50- SOLD

Disk/ drum P value -$20 - SOLD

Trailing arms - $150 - SOLD

Rear Shock relocation Kit- $25 - SOLD

New power steering gear box- $65 - SOLD

8-Port Valve Block Complete control of 4 corners Works with any Switch Box Pre-wired and includes pigtail harness Fittings accept 1/4" O.D. Tubing -
$150 -SOLD

http://www.arnottairsuspension.com/p...s.asp?catId=15

Autoloc 8 Presets Air Genie Air Suspension Control System + 4 Air Pressure Sensor - $175- SOLD

http://www.autoloc.com/catalog/Air-S...Control-System

smokinstang70 · 01-08-2012, 08:59 PM

interested in the "94 astor van hydro brake booster - $50".. can you get me a picture and tell me more about it. Is it new, used? etc. Any reason why you didn't use it?

Thanks

jessewebb · 01-08-2012, 09:03 PM

interested in the New power steering gear box. shipping to 25801 WV. and some pic's. it is for a 1969C/10 correct?

dnd1978 · 01-08-2012, 09:05 PM

**

**Tim Christian** · 01-08-2012, 09:16 PM

Interested in Hidden Receiver Hitch is it the one Early Classic Ent. sells?

dnd1978 · 01-08-2012, 09:19 PM

**

dnd1978 · 01-08-2012, 09:32 PM

**

dnd1978 · 01-08-2012, 09:40 PM

***

dnd1978 · 01-08-2012, 09:45 PM

***

dnd1978 · 01-08-2012, 09:49 PM

Smokinstang,

Its used and in good shape. Im thinking i will use a small vac booster.

Later
Dillon

Quote:

Originally Posted by smokinstang70

interested in the "94 astor van hydro brake booster - $50".. can you get me a picture and tell me more about it. Is it new, used? etc. Any reason why you didn't use it?

Thanks

fishingjred73 · 01-08-2012, 09:50 PM

Inline for Pwr steering gear box. Can pick up.

dnd1978 · 01-08-2012, 09:51 PM

Tim,

Yes it is a Early Classic Ent Hidden Receiver Hitch

Quote:

Originally Posted by Tim Christian

Interested in Hidden Receiver Hitch is it the one Early Classic Ent. sells?

smokinstang70 · 01-08-2012, 09:57 PM

thanks... interested in it for my restoration. Any idea on shipping to 31312? cheapest thing they got.

dnd1978 · 01-08-2012, 10:02 PM

Jessewebb,

It should work its for a 72c10

Quote:

Originally Posted by jessewebb

interested in the New power steering gear box. shipping to 25801 WV. and some pic's. it is for a 1969C/10 correct?

gcburdic · 01-08-2012, 10:06 PM

I'll take the rear shock relocator kit if it's all there and in good shape...shipped to 28031?

dnd1978 · 01-08-2012, 10:10 PM

**

jessewebb · 01-08-2012, 10:13 PM

I have a 69, I'll have to pass

fishingjred73 · 01-08-2012, 10:25 PM

Quote:

Originally Posted by jessewebb

I have a 69, I'll have to pass

I"ll take it. Shipping to business 71467. Let me know how you want payment.

chevytruckluver · 01-08-2012, 10:44 PM

I will take the hydroboost if it gets to me
what pipe size are the mufflers?

dnd1978 · 01-08-2012, 10:46 PM

2.5

Quote:

Originally Posted by chevytruckluver

i will take the hydroboost if it gets to me
what pipe size are the mufflers?

dnd1978 · 01-08-2012, 10:50 PM

Its all there in great shape $11 shipping total would be $36.

I take paypal: dnd1978@yahoo.com

Quote:

Originally Posted by gcburdic

I'll take the rear shock relocator kit if it's all there and in good shape...shipped to 28031?

ken67step · 01-08-2012, 10:53 PM

how about more pics of valves and controler

dnd1978 · 01-08-2012, 10:54 PM

guys I will get some boxes from work tomorrow and get some prices.Thanks

dnd1978 · 01-08-2012, 11:09 PM

Smokinstang,

I can not fit it in a flat rate boxs so UPS for $23 total $73 Shipped.
If you want it paypal; DND1978@yahoo.com

Thanks
Dillon

Quote:

Originally Posted by smokinstang70

thanks... interested in it for my restoration. Any idea on shipping to 31312? cheapest thing they got.

smokinstang70 · 01-08-2012, 11:10 PM

Thanks... I'll keep an eye on the forum for shipping prices tomorrow.

01-08-2012, 08:51 PM	#1
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Good Part; Time of Clean-up* Guys its time to clean out the gargae. All parts are plus shipping I take paypal: dnd1978@yahoo.com ______________________________________________________ Hood- in great shape - $225 KYB Rear Shocks; work great some over spray -$45 KYB Fr Shocks; work graet some over spray-$45 13 gallon gas tank with mount brackets - $55 Complete steering linkage; works great no play - $100 STEERING SHAFT with rag joint -$20 Tinted sliding back glass good shape- $65 Early Classic Ent Hidden Receiver Hitch -$100 License Plate Flip Frame-$20 67-87 Rear Bumper - Stepside - Chrome with brackets-$125 upper control arms no ball joint - $50 lower control arms with ball joints - $70 Bag plates - $25 Holley750 CFM Four Barrel Carburetor blower carb - $250 PART #: 0-80576SThese Carburetors that are intended for use with superchargers, and have a unique capability that allows their power Valves to reference the intake Manifold vacuum below the supercharger. This allows the power valve to operate as it should, based off intake Manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Without this external referencing, the power valve would be "reading" the Supercharger boost pressure, which has no bearing on the engine load. http://www.holley.com/0-80576S.asp 2, 2.5' Flowmaster mufflers 40 s Offset inlet / sentered offlet 2year old - $75 - SOLD like new brake booster with bracket $65- SOLD 94 astor van hydro brake booster - $50- SOLD Disk/ drum P value -$20 - SOLD Trailing arms - $150 - SOLD Rear Shock relocation Kit- $25 - SOLD New power steering gear box- $65 - SOLD 8-Port Valve Block Complete control of 4 corners Works with any Switch Box Pre-wired and includes pigtail harness Fittings accept 1/4" O.D. Tubing - $150 -SOLD http://www.arnottairsuspension.com/p...s.asp?catId=15 Autoloc 8 Presets Air Genie Air Suspension Control System + 4 Air Pressure Sensor - $175- SOLD http://www.autoloc.com/catalog/Air-S...Control-System Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840 Last edited by dnd1978; 02-01-2012 at 07:40 PM.

01-08-2012, 08:59 PM	#2
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Good Part; Time of Clean-up* interested in the "94 astor van hydro brake booster - $50".. can you get me a picture and tell me more about it. Is it new, used? etc. Any reason why you didn't use it? Thanks __________________ "Love Affair" Build Thread

01-08-2012, 09:03 PM	#3
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Good Part; Time of Clean-up* interested in the New power steering gear box. shipping to 25801 WV. and some pic's. it is for a 1969C/10 correct? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

01-08-2012, 09:05 PM	#4
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* ** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 09:16 PM	#5
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: Good Part; Time of Clean-up* Interested in Hidden Receiver Hitch is it the one Early Classic Ent. sells?

01-08-2012, 09:19 PM	#6
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* ** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 09:32 PM	#7
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* ** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 09:40 PM	#8
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* *** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 09:45 PM	#9
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* *** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 09:50 PM	#11
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: Good Part; Time of Clean-up* Inline for Pwr steering gear box. Can pick up. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

01-08-2012, 09:57 PM	#13
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Good Part; Time of Clean-up* thanks... interested in it for my restoration. Any idea on shipping to 31312? cheapest thing they got. __________________ "Love Affair" Build Thread

01-08-2012, 10:06 PM	#15
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Good Part; Time of Clean-up* I'll take the rear shock relocator kit if it's all there and in good shape...shipped to 28031? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 01-08-2012 at 10:13 PM.

01-08-2012, 10:10 PM	#16
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* ** Attached Images __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 10:13 PM	#17
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Good Part; Time of Clean-up* I have a 69, I'll have to pass __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

01-08-2012, 10:44 PM	#19
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: Good Part; Time of Clean-up* I will take the hydroboost if it gets to me what pipe size are the mufflers? __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step



Register or Log In To remove these advertisements.

01-08-2012, 10:53 PM	#22
ken67step Registered User Join Date: Sep 2009 Location: mpls mn 55411 Posts: 27	Re: Good Part; Time of Clean-up* how about more pics of valves and controler __________________ JUST TRYING TO GET IT DONE

01-08-2012, 10:54 PM	#23
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: Good Part; Time of Clean-up* guys I will get some boxes from work tomorrow and get some prices.Thanks __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

01-08-2012, 11:10 PM	#25
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Good Part; Time of Clean-up* Thanks... I'll keep an eye on the forum for shipping prices tomorrow. __________________ "Love Affair" Build Thread

Register or Log In To remove these advertisements.