OR Serpentine belt conversions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 01-12-2012, 02:34 AM

This a used serpentine belt conversion is for small block chevys. The pics are my demo set up. The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts. The RH bracket originally used 2 mounting bolts to the cylinder head. If your cylinder head only has the traditional one hole it will still work fine. I have sold many of these that only used one mounting hole with no problems. These will come cleaned and ready for detailing. I can detail a kit for 100.00 extra which will include media blasting and painting in satin black. I have four of these conversions for 225.00 plus shipping. Big block conversions also available.

HeavyMetalChevy · 01-12-2012, 02:42 AM

would you consider selling this setup minus the power steering pump, pulley fan,clutch, and crank pulley?

jacobriley · 01-12-2012, 01:23 PM

Put me down for one.

How do you want to be paid?

**tll74** · 01-12-2012, 01:27 PM

Quote:

Originally Posted by HeavyMetalChevy

would you consider selling this setup minus the power steering pump, pulley fan,clutch, and crank pulley?

Sure, 165.00 plus.

atltd4x4 · 01-13-2012, 11:00 AM

Will this fit 1970 4X4 radiator shroud, and the upper radiator hose. Do you have any with out A/C. What would shipping be to 30263. Any pics installed in trucks?

**tll74** · 01-13-2012, 06:09 PM

Quote:

Originally Posted by jacobriley

Put me down for one.

How do you want to be paid?

PM sent

Quote:

Originally Posted by atltd4x4

Will this fit 1970 4X4 radiator shroud, and the upper radiator hose. Do you have any with out A/C. What would shipping be to 30263. Any pics installed in trucks?

No, it will not work with the deep 4X4 shroud. I'm thinking it would work with a 2WD shroud on a 4X4 truck. I have a local freind putting one in a 72 4X4 and he just got the 2WD shroud to see if it would work. Also won't with the factory upper metal tube. A non ac set up uses a dummy pulley in place of the ac pump therefor it uses the same belt. Sorry no pics of any installed. Shipping would be 67.66 Thanks, Tom

CHILLDADDY · 01-15-2012, 03:44 PM

will this work with the regular water pump ordo i need a reverse flow?

**tll74** · 01-16-2012, 03:27 AM

Quote:

Originally Posted by CHILLDADDY

will this work with the regular water pump ordo i need a reverse flow?

It will require a reverse flow water pump. These pumps are available with or w/o the heater return port. I can supply it with a used pump but I would highly recommend a new one.

notsolo · 01-16-2012, 02:40 PM

Quote:

Originally Posted by tll74

It will require a reverse flow water pump. These pumps are available with or w/o the heater return port. I can supply it with a used pump but I would highly recommend a new one.

I am also interested. I have a 67/70 "327" I used different heads with holes for accessories. Looks like the alt bracket bolts on to a later model exhaust manifolds. mine are ram horn style, will this still work. Will there be any issue with crank pulley. What is shipping to 21863 Snow Hill,Md and is Paypal ok. Thanks Ed.

1-PU70 · 01-16-2012, 06:27 PM

How much for a BB? Do you have any pics?

**tll74** · 01-16-2012, 10:49 PM

Quote:

Originally Posted by notsolo

I am also interested. I have a 67/70 "327" I used different heads with holes for accessories. Looks like the alt bracket bolts on to a later model exhaust manifolds. mine are ram horn style, will this still work. Will there be any issue with crank pulley. What is shipping to 21863 Snow Hill,Md and is Paypal ok. Thanks Ed.

The bracket that goes to the exhaust manifold will not work with the ram horn manifolds with out mods. For those that have headers these conversions work fine. If still interested let me know, then I can get shipping cost.

Quote:

Originally Posted by 1-PU70

How much for a BB? Do you have any pics?

Sorry, I sold the bbc kit local.

Thanks

notsolo · 01-16-2012, 11:19 PM

Quote:

Originally Posted by tll74

The bracket that goes to the exhaust manifold will not work with the ram horn manifolds with out mods. For those that have headers these conversions work fine. If still interested let me know, then I can get shipping cost.

Sorry, I sold the bbc kit local.

Thanks

Hey does manifold bracket hold the PS pump, or is it to stabilize the back of the ALT. I am trying to figure what Mods I will need to get this right. Thanks....Ed

54Caddy · 01-17-2012, 12:00 AM

so your selling basically jus the brackets and pullyes for 225 or does it come with the ac compressor, alternator, and power steering pump??

**tll74** · 01-17-2012, 02:50 AM

Quote:

Originally Posted by notsolo

Hey does manifold bracket hold the PS pump, or is it to stabilize the back of the ALT. I am trying to figure what Mods I will need to get this right. Thanks....Ed

The bracket hits the manifold before it gets up to the head of the bolt. I can send a pic of the issue tomorrow night. It really helps support both. I have seen guys delete this bracket with no problems as far as I know.

Quote:

Originally Posted by 54Caddy

so your selling basically jus the brackets and pullyes for 225 or does it come with the ac compressor, alternator, and power steering pump??

The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts.
You will need a new water pump, belt, and pig tail for alt.

notsolo · 01-17-2012, 10:12 AM

Quote:

Originally Posted by tll74

The bracket hits the manifold before it gets up to the head of the bolt. I can send a pic of the issue tomorrow night. It really helps support both. I have seen guys delete this bracket with no problems as far as I know.

The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts.
You will need a new water pump, belt, and pig tail for alt.

I think I can make this work, cut the U shape off the tab and add a brace. Give me a shipping quote when you get a chance. .... Thanks Ed.

DD1 · 01-17-2012, 05:50 PM

I am interested, but do not have the budget right now. Please let me know if you have more available in the future. Thanks!

**tll74** · 01-18-2012, 07:11 PM

Quote:

Originally Posted by notsolo

I think I can make this work, cut the U shape off the tab and add a brace. Give me a shipping quote when you get a chance. .... Thanks Ed.

Shipping via UPS is 68.00, Thanks

notsolo · 01-19-2012, 12:17 AM

Quote:

Originally Posted by tll74

Shipping via UPS is 68.00, Thanks

Hey Tom Let me know how to pay you or send me your paypal address.... Total was 293. is that correct......Thanks Ed

Michael Star · 02-09-2012, 11:00 AM

Do you still have some available? This would pretty much bolt up to a 70 gmc with a 350 right?

**truckdude239** · 02-09-2012, 11:54 AM

Subscribing to this in case you have more in the future

Timbo1 · 02-09-2012, 12:01 PM

I would also be interested, Can you run the kit without the fan? Or does the fan hold the pulley on? I have electric fan so would not need fan and clutch if it will work like that. Oh and 134 would be my choice. Thanks Tim

**tll74** · 02-10-2012, 11:35 PM

Quote:

Originally Posted by Timbo1

I would also be interested, Can you run the kit without the fan? Or does the fan hold the pulley on? I have electric fan so would not need fan and clutch if it will work like that. Oh and 134 would be my choice. Thanks Tim

Tim, it would work fine without the fan and clutch. Just use short bolts with HD flat washers to prevent the pulley from cracking over time. Thanks, Tom

**tll74** · 06-23-2012, 01:56 PM

Sold two still have two left. TTT

orngsikL · 06-23-2012, 03:10 PM

so how would I tell if this would fit on my 350?

orange 69 · 06-23-2012, 04:40 PM

Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.?

01-12-2012, 02:34 AM	#1
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Serpentine belt conversions This a used serpentine belt conversion is for small block chevys. The pics are my demo set up. The kit includes RH AC bracket, AC R-4 pump R134 or R12, LH Alt-power steering bracket, 100A Alt, power steering pump, belt tensioner, fan clutch, fan blade, clutch mounting studs & nuts, water pump pulley, crankshaft pulley w/bolts, braces and nuts & bolts. The RH bracket originally used 2 mounting bolts to the cylinder head. If your cylinder head only has the traditional one hole it will still work fine. I have sold many of these that only used one mounting hole with no problems. These will come cleaned and ready for detailing. I can detail a kit for 100.00 extra which will include media blasting and painting in satin black. I have four of these conversions for 225.00 plus shipping. Big block conversions also available. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-12-2012, 02:42 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Serpentine belt conversions would you consider selling this setup minus the power steering pump, pulley fan,clutch, and crank pulley? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

01-12-2012, 01:23 PM	#3
jacobriley Registered User Join Date: Jun 2010 Location: Phoenix, Arizona Posts: 46	Re: Serpentine belt conversions Put me down for one. How do you want to be paid?

01-13-2012, 11:00 AM	#5
atltd4x4 Registered User Join Date: Oct 2006 Location: Newnan GA Posts: 87	Re: Serpentine belt conversions Will this fit 1970 4X4 radiator shroud, and the upper radiator hose. Do you have any with out A/C. What would shipping be to 30263. Any pics installed in trucks? Last edited by atltd4x4; 01-13-2012 at 11:08 AM.

01-15-2012, 03:44 PM	#7
CHILLDADDY PIMPING ON A BUDGET Join Date: Sep 2010 Location: HOUSTON,TX Posts: 64	Re: Serpentine belt conversions will this work with the regular water pump ordo i need a reverse flow? __________________ CHILLDADDY

01-16-2012, 06:27 PM	#10
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: Serpentine belt conversions How much for a BB? Do you have any pics? __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

01-17-2012, 12:00 AM	#13
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Serpentine belt conversions so your selling basically jus the brackets and pullyes for 225 or does it come with the ac compressor, alternator, and power steering pump?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-17-2012, 05:50 PM	#16
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: Serpentine belt conversions I am interested, but do not have the budget right now. Please let me know if you have more available in the future. Thanks!

02-09-2012, 11:00 AM	#19
Michael Star Registered User Join Date: Jan 2012 Location: BOWLING GREEN Posts: 69	Re: Serpentine belt conversions Do you still have some available? This would pretty much bolt up to a 70 gmc with a 350 right?

02-09-2012, 11:54 AM	#20
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Serpentine belt conversions Subscribing to this in case you have more in the future __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

02-09-2012, 12:01 PM	#21
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Serpentine belt conversions I would also be interested, Can you run the kit without the fan? Or does the fan hold the pulley on? I have electric fan so would not need fan and clutch if it will work like that. Oh and 134 would be my choice. Thanks Tim

06-23-2012, 01:56 PM	#23
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions Sold two still have two left. TTT __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

06-23-2012, 03:10 PM	#24
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Serpentine belt conversions so how would I tell if this would fit on my 350? __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

06-23-2012, 04:40 PM	#25
orange 69 Registered User Join Date: Aug 2011 Location: Benton Arkansas Posts: 129	Re: Serpentine belt conversions Will this fit a 1976 SB 400 factory motor(no mods) with out A.C.? __________________ Thanks Joe Hester



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.