1964 GMC 3/4 ton build :D - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckzilla · 01-18-2012, 06:04 PM

Hey Sean, any chance you remember the details like stock numbers so that I could order the same Lokar shifter for my 6L80?

sdwolff98 · 01-18-2012, 07:57 PM

Hey Truck,
I used a 700r4 model shifter for the 6l80/6l90 in my truck

. I started out with a tail mounted shifter then went and got fancy with it lol. made some mounting brackets and put it in my console of the truck. On the 700 tailshaft mount you have to remove the material between the bolt holes to get it to mate to the back on the 6l80 housing will get a picture of it tonight and post it up later.

Sean
part number:
ATS6700ETM Automatic Trans Shifter 700-R4 8" Tailmount

sdwolff98 · 01-18-2012, 11:26 PM

Hey Truck,
Here is a picture of the tail shaft mount mod to get the lokar to fit the 6l80. there are two sets of bolt holes in the bracket where it bolts to the tranny so it can fit either the 700 or the newer 4l60 I removed the material between to holes to get it to match up to the bolt pattern on the 6l80.

Sean

truckzilla · 01-19-2012, 11:26 AM

Hey Sean,
Thanks for the part numbers and modification info. One of these Saturdays I'll have to get over to Plano to see it in person. I'm in the NW side of Cowtown.

sdwolff98 · 01-19-2012, 01:56 PM

Hey Truck,
I have some of the parts needed for the conversion that are different from the kit parts i can give you. i will have to pull you up under the truck to show you which bolts you need to use.
Come on over

I will home tommorrow evening after 4pm.

Sean

truckzilla · 01-20-2012, 11:59 AM

Hey Sean,
I just sent you a PM.

01-18-2012, 06:04 PM	#1
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: 1964 GMC 3/4 ton build :D Hey Sean, any chance you remember the details like stock numbers so that I could order the same Lokar shifter for my 6L80?

01-18-2012, 07:57 PM	#2
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,127	Re: 1964 GMC 3/4 ton build :D Hey Truck, I used a 700r4 model shifter for the 6l80/6l90 in my truck . I started out with a tail mounted shifter then went and got fancy with it lol. made some mounting brackets and put it in my console of the truck. On the 700 tailshaft mount you have to remove the material between the bolt holes to get it to mate to the back on the 6l80 housing will get a picture of it tonight and post it up later. Sean part number: ATS6700ETM Automatic Trans Shifter 700-R4 8" Tailmount __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867

01-18-2012, 11:26 PM	#3
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,127	Re: 1964 GMC 3/4 ton build :D Hey Truck, Here is a picture of the tail shaft mount mod to get the lokar to fit the 6l80. there are two sets of bolt holes in the bracket where it bolts to the tranny so it can fit either the 700 or the newer 4l60 I removed the material between to holes to get it to match up to the bolt pattern on the 6l80. Sean Attached Images __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867

01-19-2012, 11:26 AM	#4
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: 1964 GMC 3/4 ton build :D Hey Sean, Thanks for the part numbers and modification info. One of these Saturdays I'll have to get over to Plano to see it in person. I'm in the NW side of Cowtown.

01-19-2012, 01:56 PM	#5
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,127	Re: 1964 GMC 3/4 ton build :D Hey Truck, I have some of the parts needed for the conversion that are different from the kit parts i can give you. i will have to pull you up under the truck to show you which bolts you need to use. Come on over I will home tommorrow evening after 4pm. Sean __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867

01-20-2012, 11:59 AM	#6
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: 1964 GMC 3/4 ton build :D Hey Sean, I just sent you a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.