01-28-2012, 11:11 PM | #1 |
Registered User
Join Date: Nov 2011
Location: Anchorage Alaska
Posts: 26
|
Dropped 10 inches?
hi i dropped my truck 4 inches all around with spindles and shackles and hangars. I wanna go lower without bagging so i was thinking about doing a flip kit in the back but thats another 6 inches and i dont even know if thats drivable. so i was just wondering if anyones already done this
__________________
1985 Chevy C10 swb 350 |
01-28-2012, 11:41 PM | #2 |
Registered User
Join Date: Jan 2011
Location: Tulsa,Okla
Posts: 590
|
Re: Dropped 10 inches?
I had the same setup you have. I went to the 5" flip kit and put stock shackles back on. Then cut a full coil in front. Without a c-notch I occasionally bottom out on the rear. I'm going to either put the stock hangers back or reposition the ones I have and bring it back up about an inch in the back to eliminate it hitting. If you flip it with the shackles and hangers you have, I would say you would have to c-notch it. Hope that helps.
|
Bookmarks |
Tags |
dropped, inches, lowered, ten |
|
|