Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-07-2012, 03:23 PM | #11 | |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,561
|
Re: Fab question about my 50
Quote:
Several in the build section on putting the AD cabs on S10 frames. Some of the guys started with bare cabs and worked out from there. I think there is a thread on shortening a long bed into a short bed. It should involve taking 9-1/4 inches out of the front of the bed and moving the post s back by drilling out the spot welds and welding the posts back to the bed. then drill out the spot welds in the middle posts and fill the holes. Then to do it right you need to shorten the bed at the back to get the correct short bed length on the bed. Stock shortbed pickup Another but chopped shortbed pickup (not mine) Long bed AD pickup. Stolen straight off the net for the photo. there may not be as much sticking out the back as I thought. |
|
Bookmarks |
|
|