OK i'm selling lower 64-66 door patches

[chad64chevy]

i'm about to start cutting up my spare doors to fix my doors and if anybody has speaker holes in the lower part of there doors and wants a patch for it i'll cut it out for you!! as far as price goes it would be $5 each plus whatever it cost for shipping!! i'll be cutting the outside of the doors out this weekend let me know, thanks!!

[LostMy65]

Originally Posted by chad64chevy

i'm about to start cutting up my spare doors to fix my doors and if anybody has speaker holes in the lower part of there doors and wants a patch for it i'll cut it out for you!! as far as price goes it would be $5 each plus whatever it cost for shipping!! i'll be cutting the outside of the doors out this weekend let me know, thanks!!

I'll take em contingent on pics of area.
Posted via Mobile Device

[k1rodeoboater]

are there any cowl dents in the doors?

[k1rodeoboater]

crap I can't edit my last. I basically need a patch to repair the damage from the door hitting the cowl. I can use metal further back on the door if you're going to not be using that section.

[LostMy65]

I guess I'm still a little confused of what patches you will have available. I'm interested in any of the lower portion(s), inner or outer, you won't be using
Posted via Mobile Device

[chad64chevy]

ok, if you guys can post pics of the areas that you need! that would help for when i get ready to cut them up! the doors i have aren't all that great, thats why i'm cutting them up! the lower parts of the doors, i'm cutting out is were most people cut to put speakers in there doors! i'll post pics tomorrow mourning of the part i'm talking about, thanks!!

[chad64chevy]

Originally Posted by LostMy65

I guess I'm still a little confused of what patches you will have available. I'm interested in any of the lower portion(s), inner or outer, you won't be using
Posted via Mobile Device

the outside is really not that great rusted in both corners on both doors! i'll get pics up tomorrow, thanks!!

[chad64chevy]

Originally Posted by k1rodeoboater

crap I can't edit my last. I basically need a patch to repair the damage from the door hitting the cowl. I can use metal further back on the door if you're going to not be using that section.

can you post the damage to your door(s)! i can cut it out to some point! since that is a small part of the door i was cut out for myself, but i can still help you out with the patch for it! i just got to see how much you need and what i don't, if that makes sence to you, lol!!

[k1rodeoboater]

Will get you some pics as soon as I get home
Posted via Mobile Device

[chad64chevy]

ok got some pictures today outside bottom are no good on both doors rusted with bondo, inside bottoms are no good either got of pin holes! the black flat piece is what i was talking about cutting out, the ouside edge is fine k1rodeoboater! just need to know how big a piece you need and if you need 1 or 2 pieces!

[chad64chevy]

heres the pictures of the outside bottom and the inside side, last picture is a close up of the thrid picture to show some of the pin holes, the very bottom has atleast 10-15 pin holes just like the side does

[LostMy65]

I still need to pull off the tin someone riveted over the speaker hole to verify what size, but this is the area. Don't cut anything until I'm sure.
Thanks,
Robert

[chad64chevy]

Originally Posted by LostMy65

I still need to pull off the tin someone riveted over the speaker hole to verify what size, but this is the area. Don't cut anything until I'm sure.
Thanks,
Robert

lost, the piece i'll cut out for you would be over size anyways, like just under where the door panel is and to the bottom edge! which would give to enough to trim it down!! do you need one piece or does your other door have a speaker too??

[chad64chevy]

i'll be cutting them saturday just to let you guys know

[LostMy65]

Originally Posted by chad64chevy

lost, the piece i'll cut out for you would be over size anyways, like just under where the door panel is and to the bottom edge! which would give to enough to trim it down!! do you need one piece or does your other door have a speaker too??

Yea, I'm just trying to keep shipping prices down. I'm thinking if they can all fit in one of those manila envelopes, we might even keep the total shipping under 5 bucks. So, I may only need the pieces to be cut at less than 8x11. I have four doors, so I might want the front portion of the similar area also.
I'll check for sure tomorrow.
Thanks again.
Posted via Mobile Device

[chad64chevy]

i have an idea of a way to ship them! do you need all four corners??

[chad64chevy]

k1rodeo, how many pieces do you need? and how big?? i'll be cuttin these doors up tomorrow to fix a few spots in my doors and one spot in my hood!!

[k1rodeoboater]

I'll need two pieces to fix this damage on both my passenger and driver doors. dimensionally from the lower body line a piece that is 8" long all the way up to the window would be perfect. It can be from any part of the door really

[LostMy65]

I took some pics, and I can easily get by with just pieces cut to 8x11.
How do these pics look?



Posted via Mobile Device

[chad64chevy]

that will work, i'll cut them a lil big and let you trim them down! do you only need two pieces or all four corners!!

[LostMy65]

I have 4 doors to do. My 66 truck has speaker holes, and my 65 has speaker holes.
4 similar pieces total.

Posted via Mobile Device

[LostMy65]

I edited your photo.
8x11 along the red lines I drew should work.


Posted via Mobile Device

[chad64chevy]

robert, i'll get all 4 of those cut out for you, i got a few sheets of cardboard and can make an envelope for them! all them being the same they will just be stacked on top of each other!

k1rodeo, i'll get you your pieces cut out today as while!

i'll need you both to send me a pm with your mailing address, and i'll get you both shipping quotes monday, and then we can make payment arrangements

[k1rodeoboater]

PM sent

[LostMy65]

pm sent