The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-09-2012, 11:52 AM   #1
C15_Sierra
Registered User
 
C15_Sierra's Avatar
 
Join Date: Apr 2011
Location: Hartford CT
Posts: 223
Question Replacing Brake Booster?

After I got exhaust on my truck, I was finally able to diagnose why I wasn't feeling any power assist on my brakes. I have a pretty strong vacuum leak in the interior of the cab (sounds like the blower motor, but sucking) which the diagnosticians of the interwebs have told me is a bad diaphragm. Engine performance isn't affected, further leading to a diagnosis of a bad diaphragm

My truck had manual brakes and I bought a used booster and M/C to convert to power brakes. M/C was bad so I replaced it, now I'm guessing the booster is bad That right?

There is a boot that goes around the pedal rod going into the booster, and it sounds like it might not even be on tight. Can that be not seated right and cause issues, or is it definitely a bad diaphragm

Wish I could figure this out on my own (and earlier) but my boss sent me to NC for a few days on business on the day I got my exhaust fitted. So I didn't have much time to diagnose, and I want to get the right parts ordered before the weekend (not like it will help much)

I just want to drive my truck!
__________________
-Steve

1980 GMC C15 Sierra LWB
Dark Carmine Red/Carmine Int
Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011)
Now: 5.3/4L60E, 2.73 12-bolt open rear
C15_Sierra is offline   Reply With Quote
Old 03-09-2012, 01:07 PM   #2
Jonboy
Slots go on anything!
 
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
Re: Replacing Brake Booster?

Sounds right on. It will be a lot more noticable when the brakes are pressed.
__________________
1974 Jimmy- 5.3/4L80e/NP241
Jonboy is offline   Reply With Quote
Old 03-09-2012, 08:36 PM   #3
donut
Registered User
 
donut's Avatar
 
Join Date: Aug 2009
Location: S.C.
Posts: 1,593
Re: Replacing Brake Booster?

x2.
You can also pull and plug the vacuum line to the booster and see if the noise stops. IIRC, the boot doesn't make the seal. (may be wrong though)
__________________
'86 C-30 dually, 454/tbh400
'73 K-20 350/350/205 (sold )

I'm kinda like duct tape- no real purpose, but handy to have around.
donut is offline   Reply With Quote
Old 03-10-2012, 05:31 PM   #4
C15_Sierra
Registered User
 
C15_Sierra's Avatar
 
Join Date: Apr 2011
Location: Hartford CT
Posts: 223
Re: Replacing Brake Booster?

New booster's been ordered...thanks for the input guys!
__________________
-Steve

1980 GMC C15 Sierra LWB
Dark Carmine Red/Carmine Int
Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011)
Now: 5.3/4L60E, 2.73 12-bolt open rear
C15_Sierra is offline   Reply With Quote
Old 03-11-2012, 09:20 PM   #5
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Replacing Brake Booster?

I recently had brake pressure problems and diagnosed it as a bad check valve on the booster. Problem solved - for one day - then I guess the new "excess" pressure in the booster caused vacuum to blow out the other end of the booster. I got a Delco rebuilt booster from an online OEM vendor. I was going to go with a new Delco booster, but the rebuild was $100 vs. $212 for a new one.
tucsonjwt is offline   Reply With Quote
Reply

Bookmarks

Tags
booster, brake, diaphragm, leak, power


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com