Anyone go to 6 bolt on 2wd square? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

D13 · 03-15-2012, 08:12 AM

Not happy with the 15" tires on my DD (87 R10). It's a diesel and really nose heavy, the dirt roads are rough on the sidewalls, so I'd like to got to a heavy wall 16". There appears to be a lot better wheel selection from 6 bolt 4x4's. I have a line on a 91 Blazer 6 lug axle. My question is does anyone have a 6 lug 2wd front hub? I have both large and small spindles available.

D13 · 03-15-2012, 09:52 AM

Help moderators, please move me to suspension. Not enough caffiene this morning.

Super73 · 03-15-2012, 01:24 PM

D13, the moderators that used to be in this section no longer are moderators. The site felt we were too busy for the site even though were are in this section 3+ times a day. You might want to just start a new thread in the correct section. This one will eventually make its way to the bottom.
Posted via Mobile Device

**Captainfab** · 03-15-2012, 11:13 PM

There are 6 lug rotors for the '73-'87 spindles available from suppliers such as ECE, CPP and POL.

03-15-2012, 08:12 AM	#1
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Anyone go to 6 bolt on 2wd square? Not happy with the 15" tires on my DD (87 R10). It's a diesel and really nose heavy, the dirt roads are rough on the sidewalls, so I'd like to got to a heavy wall 16". There appears to be a lot better wheel selection from 6 bolt 4x4's. I have a line on a 91 Blazer 6 lug axle. My question is does anyone have a 6 lug 2wd front hub? I have both large and small spindles available. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

03-15-2012, 09:52 AM	#2
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: Anyone go to 6 bolt on 2wd square? Help moderators, please move me to suspension. Not enough caffiene this morning. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

03-15-2012, 01:24 PM	#3
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: Anyone go to 6 bolt on 2wd square? D13, the moderators that used to be in this section no longer are moderators. The site felt we were too busy for the site even though were are in this section 3+ times a day. You might want to just start a new thread in the correct section. This one will eventually make its way to the bottom. Posted via Mobile Device __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-15-2012, 11:13 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Anyone go to 6 bolt on 2wd square? There are 6 lug rotors for the '73-'87 spindles available from suppliers such as ECE, CPP and POL. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.