IN Heading to St. Louis Swap Meet on April 29, 2012 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 04-16-2012, 09:14 PM

I am heading to the Model T club sponsored swap meet in Collinsville, IL on April 29th and trying to figure out what to load up. I am sorry but I can only hold items only with money down. I will be heading over on Saturday April 28 to set up and can meet up that night or at the swap meet on Sunday. I am in spaces F-115 & F-116 Here is the info on the swap meet http://www.stlmodeltclub.org/swapmeet.html

I have several large items that I can not ship and would like to get out of my way. Here are some of the items I am THINKING about bringing. Let me know if there is any interest.

1. 1967 C10 Short Wheel Base rolling chassis: 6 lug, 3:73 gear, 4 wheel drum, does not include the rally wheels that are in the pictures, previous owner told me the chassis was redone and then set outside, looks like new front end part, brakes? new coil springs $550.00

2. 1972 C10 Short Wheel Base Frame: only the frame rails and the riveted in cross members. $250.00

3. 1967 Chevy Doghouse: Complete, minimal rust, includes painted grille hoops and headlight bezels $400.00 Pending local sale

4. 1967-68 Chevy core support: right side below the battery has been repaired SOLD

5. 1972 Roof Section: cut off at the bottom of the a-pillars and below the double panel in the rear. SOLD

6. 1968 Dash non a/c: cut outside windshield & unbolted from sides listed here http://67-72chevytrucks.com/vboard/s...d.php?t=467199 $80.00

7. 3 cowl vent sections- good shape & the back one doesn't have a hole for the antenna. $20.00 each for the reg. panels (1 SOLD) & $45.00 for the antenna delete one

8. 1967 Small Back Window cab panel w/ window: cut across the top of the cab roof and below the double wall. $45.00 Window sold seperate

9. 1968-70 GMC NOS Paintable grille: listed here http://67-72chevytrucks.com/vboard/s...d.php?t=405403 $200.00

10. 1967-68 Chevy Grille: $100.00

11. 1967 Chevy Bare Cab With A/C and large back window W/ IL title listed here http://67-72chevytrucks.com/vboard/s...d.php?t=511264 $250.00

12. 15X8 truck rally wheels 5 lug set of 4 $100.00 no caps or trim rings

I also have items that are not truck related also.

I have other stuff big and small so if you are coming to the swap meet let me know what you are looking for. I can not bring everything so I am trying to pack what people need or want. Thanks for looking.

**Todd68Chevy** · 04-17-2012, 09:51 AM

Ttt

**Todd68Chevy** · 04-20-2012, 08:57 PM

ttt

firedog · 04-21-2012, 10:35 AM

Here is another bump for you todd will more than likely see you there, do you have a set of lower control arms?

**Todd68Chevy** · 04-21-2012, 05:50 PM

Quote:

Originally Posted by firedog

Here is another bump for you todd will more than likely see you there, do you have a set of lower control arms?

What year are you needing? I think 67-70 are the same but 71-72 are different.

firedog · 04-21-2012, 10:18 PM

Well, swapping to cpp 5 lug disk brake kit with drop spindles on a 67, one of the lower control arms is bent, so either would work, i would think by just changing ball joints

**Todd68Chevy** · 04-23-2012, 06:59 AM

Quote:

Originally Posted by firedog

Here is another bump for you todd will more than likely see you there, do you have a set of lower control arms?

I have a 71-72 left hand side but the right side is bad. $20.00 if interested in it. I have another 72 with a right one on it that looks ok but not sure if I will have time this week to get it off. I will see what I can do. I also have a complete cross member out of my 68. I am asking $100.00 for it complete. If you would be interested in them for $50.00 for the pair I would part it out.

junior43 · 04-23-2012, 08:34 AM

Where and how much rust on the 67 doghouse? Thanks
Posted via Mobile Device

**Todd68Chevy** · 04-23-2012, 09:05 AM

Quote:

Originally Posted by junior43

Where and how much rust on the 67 doghouse? Thanks
Posted via Mobile Device

Here are some pictures. I can get more. I also have a hood that goes with it or a new aftermarket hood that I would include for extra money. Thanks

**Todd68Chevy** · 04-23-2012, 09:06 AM

couple more.

**Todd68Chevy** · 04-23-2012, 09:14 AM

Quote:

Originally Posted by junior43

Where and how much rust on the 67 doghouse? Thanks
Posted via Mobile Device

I can get a better description and more pictures tonight when I get home from work.

It is a little ways away but I will be setting up to sell at the Marion County Swap Meet in Indy on May 18-19 also. if I do not sell it by then or if you want to put money down I can bring it that far if you are interested.

Thanks

junior43 · 04-23-2012, 10:53 AM

Mainly interested in what repair the fenders would need, more than anything
Posted via Mobile Device

**Todd68Chevy** · 04-23-2012, 11:17 AM

Quote:

Originally Posted by junior43

Mainly interested in what repair the fenders would need, more than anything
Posted via Mobile Device

I believe the main issue is at the bottom along the rear edge (where the door and fender meet. I will get better pictures. I know I have some of the inside of the front cups on my home computer also. Thanks

firedog · 04-23-2012, 09:11 PM

Really need a 67-70 pass side lower control arm or a the matched set of 71-72. What you asking for the 67-68 hood
Posted via Mobile Device

**Todd68Chevy** · 04-23-2012, 10:23 PM

Quote:

Originally Posted by junior43

Mainly interested in what repair the fenders would need, more than anything
Posted via Mobile Device

I took a few more pictures the back lower and the right front inner cup. These rust pictures are of the left fender. I would take $75.00 off if you do not want the hood and $50.00 off if you do not want the grille hoops and headlight bezels. Thanks

Quote:

Originally Posted by firedog

Really need a 67-70 pass side lower control arm or a the matched set of 71-72. What you asking for the 67-68 hood
Posted via Mobile Device

Let me think about splitting up the front crossmember set up. The only hoods I have is the one with the doghouse and a new TriPlus new hood in the box. I would take $325.00 for the TriPlus hood. Thanks

**Todd68Chevy** · 04-23-2012, 10:25 PM

Quote:

Originally Posted by junior43

Mainly interested in what repair the fenders would need, more than anything
Posted via Mobile Device

Here is the rust on the passenger fender. Thanks

Rusbuilt · 04-23-2012, 10:52 PM

I'd like to see pics of the roof section please

**Todd68Chevy** · 04-24-2012, 07:50 AM

Quote:

Originally Posted by Rusbuilt

I'd like to see pics of the roof section please

Here are some but if you want more just let me know. Thanks

**Todd68Chevy** · 04-24-2012, 07:51 AM

A few more.

Rusbuilt · 04-24-2012, 11:16 AM

Quote:

Originally Posted by Todd68Chevy

A few more.

I'll take it! I just need to work out my schedule to come get it...

**Todd68Chevy** · 04-24-2012, 12:23 PM

Quote:

Originally Posted by Rusbuilt

I'll take it! I just need to work out my schedule to come get it...

Just wanted to make sure you did see the rust hole on the drivers upper corner of the windshield seal area on the outside? It can be seen in the 3rd picture of the 2nd group of pictures I posted. I had not noticed that before I took the pictures this morning. Thanks

Rusbuilt · 04-24-2012, 12:24 PM

Quote:

Originally Posted by Todd68Chevy

Just wanted to make sure you did see the rust hole on the drivers upper corner of the windshield seal area on the outside? It can be seen in the 3rd picture of the 2nd group of pictures I posted. I had not noticed that before I took the pictures this morning. Thanks

yeah thats fine will you take less if I drive all the way up there to get it?

**Todd68Chevy** · 04-24-2012, 12:40 PM

Quote:

Originally Posted by Rusbuilt

yeah thats fine will you take less if I drive all the way up there to get it?

I will go $80.00. I do not mind keeping it for a little while if need be. I will be in St. Louis this weekend and I am going to swap meet in Indianapolis on May 18, 19 if that helps out any. I have a buddy in Huntsville, AL but unless something comes up, I do not have any plans to go down there anytime soon. I will let you know if something comes up and I am heading south. Thanks

Rusbuilt · 04-24-2012, 12:43 PM

Quote:

Originally Posted by Todd68Chevy

I will go $80.00. I do not mind keeping it for a little while if need be. I will be in St. Louis this weekend and I am going to swap meet in Indianapolis on May 18, 19 if that helps out any. I have a buddy in Huntsville, AL but unless something comes up, I do not have any plans to go down there anytime soon. I will let you know if something comes up and I am heading south. Thanks

Awesome, sounds good. St. Louis is actually further away than where you live. lol I will plan to get up there asap. I will let you know soon! Thanks

firedog · 04-25-2012, 08:00 AM

Bump

04-16-2012, 09:14 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Heading to St. Louis Swap Meet on April 29, 2012 I am heading to the Model T club sponsored swap meet in Collinsville, IL on April 29th and trying to figure out what to load up. I am sorry but I can only hold items only with money down. I will be heading over on Saturday April 28 to set up and can meet up that night or at the swap meet on Sunday. I am in spaces F-115 & F-116 Here is the info on the swap meet http://www.stlmodeltclub.org/swapmeet.html I have several large items that I can not ship and would like to get out of my way. Here are some of the items I am THINKING about bringing. Let me know if there is any interest. 1. 1967 C10 Short Wheel Base rolling chassis: 6 lug, 3:73 gear, 4 wheel drum, does not include the rally wheels that are in the pictures, previous owner told me the chassis was redone and then set outside, looks like new front end part, brakes? new coil springs $550.00 2. 1972 C10 Short Wheel Base Frame: only the frame rails and the riveted in cross members. $250.00 3. 1967 Chevy Doghouse: Complete, minimal rust, includes painted grille hoops and headlight bezels $400.00 Pending local sale 4. 1967-68 Chevy core support: right side below the battery has been repaired SOLD 5. 1972 Roof Section: cut off at the bottom of the a-pillars and below the double panel in the rear. SOLD 6. 1968 Dash non a/c: cut outside windshield & unbolted from sides listed here http://67-72chevytrucks.com/vboard/s...d.php?t=467199 $80.00 7. 3 cowl vent sections- good shape & the back one doesn't have a hole for the antenna. $20.00 each for the reg. panels (1 SOLD) & $45.00 for the antenna delete one 8. 1967 Small Back Window cab panel w/ window: cut across the top of the cab roof and below the double wall. $45.00 Window sold seperate 9. 1968-70 GMC NOS Paintable grille: listed here http://67-72chevytrucks.com/vboard/s...d.php?t=405403 $200.00 10. 1967-68 Chevy Grille: $100.00 11. 1967 Chevy Bare Cab With A/C and large back window W/ IL title listed here http://67-72chevytrucks.com/vboard/s...d.php?t=511264 $250.00 12. 15X8 truck rally wheels 5 lug set of 4 $100.00 no caps or trim rings I also have items that are not truck related also. I have other stuff big and small so if you are coming to the swap meet let me know what you are looking for. I can not bring everything so I am trying to pack what people need or want. Thanks for looking. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 05-06-2012 at 06:01 PM.

04-17-2012, 09:51 AM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Heading to St. Louis Swap Meet on April 29, 2012 Ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

04-20-2012, 08:57 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Heading to St. Louis Swap Meet on April 29, 2012 ttt __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

04-21-2012, 10:35 AM	#4
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	Re: Heading to St. Louis Swap Meet on April 29, 2012 Here is another bump for you todd will more than likely see you there, do you have a set of lower control arms? __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

04-21-2012, 10:18 PM	#6
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	Re: Heading to St. Louis Swap Meet on April 29, 2012 Well, swapping to cpp 5 lug disk brake kit with drop spindles on a 67, one of the lower control arms is bent, so either would work, i would think by just changing ball joints __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

04-23-2012, 08:34 AM	#8
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Heading to St. Louis Swap Meet on April 29, 2012 Where and how much rust on the 67 doghouse? Thanks Posted via Mobile Device

04-23-2012, 09:06 AM	#10
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Heading to St. Louis Swap Meet on April 29, 2012 couple more. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

04-23-2012, 10:53 AM	#12
junior43 Registered User Join Date: Mar 2010 Location: Fairmount Indiana Posts: 143	Re: Heading to St. Louis Swap Meet on April 29, 2012 Mainly interested in what repair the fenders would need, more than anything Posted via Mobile Device

04-23-2012, 09:11 PM	#14
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	Re: Heading to St. Louis Swap Meet on April 29, 2012 Really need a 67-70 pass side lower control arm or a the matched set of 71-72. What you asking for the 67-68 hood Posted via Mobile Device __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride

04-23-2012, 10:52 PM	#17
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Heading to St. Louis Swap Meet on April 29, 2012 I'd like to see pics of the roof section please __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

04-24-2012, 07:51 AM	#19
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Heading to St. Louis Swap Meet on April 29, 2012 A few more. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

04-25-2012, 08:00 AM	#25
firedog Registered User Join Date: Jun 2000 Location: Festus, Missouri Posts: 1,005	Re: Heading to St. Louis Swap Meet on April 29, 2012 Bump __________________ SOLD 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.