SANFORD build thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hemifalcon · 01-05-2013, 02:19 AM

Quote:

Originally Posted by jhrusk

hemifalcon it originally ran to the back and down with a flex line,I changed it to help with removing rear wheels

check--- make sense since you're going to be so low with your body over the wheels.. I forget that airbags can't open up or "stretch" that far.. Good idea..

jhrusk · 01-13-2013, 10:31 AM

got most of the chassis assembled,the exhaust is completed and installed.a little bit at a time. Name: 1-12-13.jpg
Views: 1986
Size: 51.0 KB

Name: 1-12-13 2.jpg
Views: 1960
Size: 51.5 KB

Name: 1-12-13 3.jpg
Views: 1948
Size: 45.0 KB

Name: 1-12-13 4.jpg
Views: 1972
Size: 58.5 KB

Name: 1-12-13 5.jpg
Views: 1965
Size: 54.0 KB

williamsboys · 01-13-2013, 10:48 AM

Wow. Great work looks awesome
Posted via Mobile Device

Desert.Chevy · 01-13-2013, 11:22 AM

Nice progress. Looking good.
Posted via Mobile Device

Dinos63 · 01-13-2013, 12:00 PM

outstanding work! so clean and the exhaust is killer

jhrusk · 01-13-2013, 01:55 PM

Thanks guys for the comments,I was having excessive camber change when I get the truck low,It always bothered me so I decided to make some new upper a-arm mounts.I moved the upper mounting point up around 2 inches and it really made a world of difference. I had mybe a 1/2 degree of camber change through the range of suspension travel that the truck will spend its time in.Anyone looking to lower a truck a lot I think would be best to get a Porterbuilt crossmember but if you have more time than money you can build something similar to this.I dont have a lot of money in it but I have a huge amount of time in it. Name: 1-12-13 6.jpg
Views: 1940
Size: 47.0 KB

Name: 1-12-13 6.jpg
Views: 1940
Size: 47.0 KB

Name: 1-12-13 7.jpg
Views: 1945
Size: 47.6 KB

Name: 1-12-13 8.jpg
Views: 1952
Size: 44.7 KB

Name: 1-12-13 9.jpg
Views: 1944
Size: 51.2 KB

Name: 1-12-13 10.jpg
Views: 1929
Size: 54.3 KB

jhrusk · 01-13-2013, 02:01 PM

with the exception of the front sway bar I will call the chassis finished.I have moved on to the cab so I will post pics of it as I make progress. Name: 1-12-13 11.jpg
Views: 1921
Size: 51.3 KB

Name: 1-12-13 11.jpg
Views: 1921
Size: 51.3 KB

Name: 1-12-13 12.jpg
Views: 1904
Size: 46.8 KB

Name: 1-12-13 13.jpg
Views: 1888
Size: 53.3 KB

Name: 1-12-13 14.jpg
Views: 1933
Size: 72.9 KB

Name: 1-12-13 15.jpg
Views: 1930
Size: 70.8 KB

Corts60 · 01-13-2013, 05:15 PM

That is some gorgeous work right there. Well done!

chad64chevy · 01-13-2013, 08:59 PM

awesome work you are doing, i like your last truck you did! i'm planning to add the lwb wheel arch to my swb, since theres a 3" difference, just to make the wheels look centered to the bed! once again awesome work and great welding skills!!

19GMC66 · 01-14-2013, 01:32 PM

Nice work man! Looking forward to seeing it all together.
Posted via Mobile Device

jhrusk · 01-27-2013, 04:42 PM

here is a little update on the rust repair,I really hate this part but it has to be done. Name: 1-27-13.jpg
Views: 2036
Size: 46.5 KB

Name: 1-27-13 2.jpg
Views: 2034
Size: 39.7 KB

Name: 1-27-13 3.jpg
Views: 2042
Size: 57.7 KB

Name: 1-27-13 4.jpg
Views: 2037
Size: 39.8 KB

Name: 1-27-13 5.jpg
Views: 2027
Size: 48.6 KB

jhrusk · 01-27-2013, 04:49 PM

Name: 1-27-13 6.jpg
Views: 2045
Size: 49.0 KB

Name: 1-27-13 7.jpg
Views: 2053
Size: 46.2 KB

Name: 1-27-13 8.jpg
Views: 2042
Size: 50.0 KB

Name: 1-27-13 9.jpg
Views: 2048
Size: 51.7 KB

williamsboys · 01-27-2013, 05:06 PM

Was you able to use the original drive shaft? If not details please
Posted via Mobile Device

jhrusk · 01-27-2013, 05:23 PM

I did not use the original as the frame I used was bare when I started,I did use a standard one piece that was shorted and re-balanced.

Bomp · 01-27-2013, 05:47 PM

Like what I'm seein'

Dinos63 · 01-27-2013, 08:47 PM

always such nice work! great skills

jhrusk · 02-07-2013, 08:10 PM

I wanted to post the latest progress on the truck,slow but steady.thanks for looking Name: 2-7-13.jpg
Views: 1986
Size: 35.7 KB

Name: 2-7-13 (1).jpg
Views: 1981
Size: 25.5 KB

Name: 2-7-13 (2).jpg
Views: 1996
Size: 45.7 KB

Name: 2-7-13 (3).jpg
Views: 1982
Size: 47.5 KB

Name: 2-7-13 (4).jpg
Views: 1991
Size: 48.4 KB

hemifalcon · 02-08-2013, 02:49 AM

nice job on your front cab repair.. I've had the pleasure of doing that exact same area on my burban...
=John

aggie91 · 02-08-2013, 10:14 AM

You are doing amazing work. I like your rear brake line routing. I just read thru the whole thread, Can you post your wheel and tire specs? I like the look and might want to do a similar tire size on mine someday. Thanks!

jhrusk · 02-08-2013, 02:35 PM

not a problem aggie91.15x8.5,285/70/15 rears, 15x5,165/80/15 fronts.american racing tto wheels. And thanks for the comments everyone.

Bomp · 02-08-2013, 05:24 PM

Nice and clean.

82swb · 03-24-2013, 03:55 PM

Any updates? Love what you have done so far.
Posted via Mobile Device

jhrusk · 03-26-2013, 03:47 PM

I have gotten a little bit done I just havent posted yet.Had a lot of other things going on but I still am making progress and thanks for asking.

flips72 · 04-20-2013, 09:26 PM

man this is a killer build, absolutly awesome skills

and it was nice meeting you today, wish we could have talked longer but traffic was pushing us on down the road. i will for sure be keeping up with this one.

jhrusk · 06-17-2013, 06:56 PM

Hey guys I have'nt posted in a while been busy with different things. I had the opportunity to build my first set of stainless headers for a friend of mine.He built a 55 chevy with a 454 and a tremec 5-speed, it also has a rack and pinion so buying headers that would fit was out of the question. Here are a few pics. Name: ss1.jpg
Views: 1777
Size: 37.5 KB

01-13-2013, 10:31 AM	#2
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread got most of the chassis assembled,the exhaust is completed and installed.a little bit at a time. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-13-2013, 10:48 AM	#3
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: SANFORD build thread Wow. Great work looks awesome Posted via Mobile Device

01-13-2013, 11:22 AM	#4
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 340	Re: SANFORD build thread Nice progress. Looking good. Posted via Mobile Device

01-13-2013, 12:00 PM	#5
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: SANFORD build thread outstanding work! so clean and the exhaust is killer __________________ CHEVY ONLY... Nothin Else !

01-13-2013, 01:55 PM	#6
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread Thanks guys for the comments,I was having excessive camber change when I get the truck low,It always bothered me so I decided to make some new upper a-arm mounts.I moved the upper mounting point up around 2 inches and it really made a world of difference. I had mybe a 1/2 degree of camber change through the range of suspension travel that the truck will spend its time in.Anyone looking to lower a truck a lot I think would be best to get a Porterbuilt crossmember but if you have more time than money you can build something similar to this.I dont have a lot of money in it but I have a huge amount of time in it. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-13-2013, 02:01 PM	#7
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread with the exception of the front sway bar I will call the chassis finished.I have moved on to the cab so I will post pics of it as I make progress. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-13-2013, 05:15 PM	#8
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,731	Re: SANFORD build thread That is some gorgeous work right there. Well done! __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

01-13-2013, 08:59 PM	#9
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: SANFORD build thread awesome work you are doing, i like your last truck you did! i'm planning to add the lwb wheel arch to my swb, since theres a 3" difference, just to make the wheels look centered to the bed! once again awesome work and great welding skills!! __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

01-14-2013, 01:32 PM	#10
19GMC66 Registered User Join Date: Nov 2012 Location: AZ Posts: 146	Re: SANFORD build thread Nice work man! Looking forward to seeing it all together. Posted via Mobile Device

01-27-2013, 04:42 PM	#11
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread here is a little update on the rust repair,I really hate this part but it has to be done. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-27-2013, 04:49 PM	#12
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-27-2013, 05:06 PM	#13
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: SANFORD build thread Was you able to use the original drive shaft? If not details please Posted via Mobile Device __________________ Williamsboy

01-27-2013, 05:23 PM	#14
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread I did not use the original as the frame I used was bare when I started,I did use a standard one piece that was shorted and re-balanced. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

01-27-2013, 05:47 PM	#15
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: SANFORD build thread Like what I'm seein'

01-27-2013, 08:47 PM	#16
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: SANFORD build thread always such nice work! great skills __________________ CHEVY ONLY... Nothin Else !



Register or Log In To remove these advertisements.

02-07-2013, 08:10 PM	#17
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread I wanted to post the latest progress on the truck,slow but steady.thanks for looking __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

02-08-2013, 02:49 AM	#18
hemifalcon Registered User Join Date: Jan 2012 Location: Union Grove, Wisconsin Posts: 421	Re: SANFORD build thread nice job on your front cab repair.. I've had the pleasure of doing that exact same area on my burban... =John __________________ My '65 Suburban Resto build-- http://smg.photobucket.com/albums/v6...65%20Suburban/ And it's story of being 'saved' http://www.jalopyjournal.com/forum/s...d.php?t=631495

02-08-2013, 10:14 AM	#19
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Kilgore, TX Posts: 4,789	Re: SANFORD build thread You are doing amazing work. I like your rear brake line routing. I just read thru the whole thread, Can you post your wheel and tire specs? I like the look and might want to do a similar tire size on mine someday. Thanks! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-08-2013, 02:35 PM	#20
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread not a problem aggie91.15x8.5,285/70/15 rears, 15x5,165/80/15 fronts.american racing tto wheels. And thanks for the comments everyone. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

02-08-2013, 05:24 PM	#21
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: SANFORD build thread Nice and clean.

03-24-2013, 03:55 PM	#22
82swb Registered User Join Date: May 2012 Location: Gilbert, Arizona Posts: 256	Re: SANFORD build thread Any updates? Love what you have done so far. Posted via Mobile Device

03-26-2013, 03:47 PM	#23
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread I have gotten a little bit done I just havent posted yet.Had a lot of other things going on but I still am making progress and thanks for asking. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

04-20-2013, 09:26 PM	#24
flips72 Registered User Join Date: Jan 2008 Location: oldfort tn Posts: 1,183	Re: SANFORD build thread man this is a killer build, absolutly awesome skills and it was nice meeting you today, wish we could have talked longer but traffic was pushing us on down the road. i will for sure be keeping up with this one. __________________ my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion

06-17-2013, 06:56 PM	#25
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 554	Re: SANFORD build thread Hey guys I have'nt posted in a while been busy with different things. I had the opportunity to build my first set of stainless headers for a friend of mine.He built a 55 chevy with a 454 and a tremec 5-speed, it also has a rack and pinion so buying headers that would fit was out of the question. Here are a few pics. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

Register or Log In To remove these advertisements.